Aninerel 3.6kW Hybrid Solar Inverter (48V DC to 110V AC) Instruction Manual

1. Introdução

This manual provides essential information for the safe and efficient operation of your Aninerel 3.6kW Hybrid Solar Inverter. Please read this manual thoroughly before installation and use, and retain it for future reference. This inverter is designed to convert 48V DC power to 110V AC pure sine wave power, suitable for various on-grid and off-grid applications.

Imagem 1: Terminadoview of the Aninerel 3.6kW Hybrid Solar Inverter, showcasing its main features including battery compatibility, grid connection, power scaling, versatile design, flexible settings, and wireless communication.

2. Instruções de segurança

Observe sempre as seguintes precauções de segurança para reduzir o risco de choque elétrico, incêndio ou ferimentos:

• Pessoal qualificado: A instalação e a manutenção devem ser realizadas somente por pessoal qualificado.
• Uso interno: This product is designed for indoor use. It is forbidden to use it outdoors.
• Ventilação: Ensure adequate ventilation around the inverter. Maintain at least 8 inches of clear space on all sides for proper airflow.
• Conexão da bateria: Always connect the battery to the inverter first before connecting solar panels or AC input.
• Aterramento: Ensure the inverter is properly grounded to prevent electrical hazards.
• Desligamento de emergência: Familiarize-se com os procedimentos de desligamento de emergência.
• Proteção contra sobrecarga: The inverter includes built-in protections against overvoltage, subvoltage, reverse polarity, and short circuits.

Image 2: A warning label emphasizing that the inverter is an indoor product and should not be used outdoors.

3. Principais características

• 3600W Hybrid Solar Inverter: Converts DC 48V to pure sine wave AC 110V, delivering 3,600W continuous and 7,200W peak output. Supports up to 4,500W PV input with 80A MPPT solar charging, maximum DC voltage 300V. Features 40A max AC input, 50/60Hz output frequency, starting voltage above 125VDC, and 80A maximum PV charging current.
• Built-in 80A MPPT Solar Charging Controller: Maximizes solar energy harvesting, boosting charging efficiency by up to 30%. Compatible with high-voltage PV arrays (up to 300VDC).
• Suporte paralelo: Supports parallel connection of up to 6 units for increased power (up to 21.6KW). Offers 120V single-phase, 120V/240V split-phase, and 208V three-phase output configurations.
• Smart LCD Screen with Real-Time Monitoring: Responsive LCD screen and indicator LEDs for real-time monitoring of power input/output, battery status, and system alerts. Intuitive control buttons for system settings.
• Flexible Charging & Output Modes: Four charging modes (Solar Only, AC Priority, Solar Priority, Hybrid Charging) and three output modes (Mains Priority, PV Priority, Inverter Output).
• 48V Battery & No-Battery Operation: Compatible with AGM, GEL, Lead-acid, Li-ion, and LiFePO4 48V batteries. Supports no-battery mode for direct solar-to-load applications.
• Rugged IP65 Dustproof & Durable Design: Built to withstand harsh environments with IP65-rated enclosure for indoor or semi-outdoor use. Features smart cooling with a variable speed fan.
• Ampla gama de aplicações: Adequado para autocaravanas, camping boats, home emergency situations, powering various appliances.

Image 3: Visual representation of the inverter's versatile design, showing single-phase, split-phase, and three-phase parallel connection options for up to six units.

4. Configuração e instalação

4.1 Desembalagem e Inspeção

Carefully unpack the inverter and all accessories. Inspect for any damage during transit. The package should include the inverter, instruction manual, installation toolkit, current sharing detection line, parallel cable, anti-reverse current CT, and WiFi module.

Image 4: Contents of the product package, including the inverter, manual, installation toolkit, various cables, and a WiFi module.

4.2 Identificação do Componente

Familiarize yourself with the inverter's external components and connection points:

1. Luz indicadora
2. Tela LCD
3. Tecla de toque
4. Protetor de sobrecarga
5. Fixação do parafuso de aterramento
6. Porta de saída AC
7. WiFi port (optional)
8. Porta de entrada AC
9. Porta de comunicação RS485-2
10. Porta de comunicação RS485-1
11. Porta de comunicação USB
12. Ventilador de refrigeração
13. Interruptor basculante ON/OFF
14. Porta de contato seco
15. Porta de compartilhamento atual (somente módulo paralelo)
16. Porta de comunicação paralela (somente módulo paralelo)
17. Porta de bateria
18. porta fotovoltaica

Image 5: Detailed diagram identifying all external ports and features of the inverter.

4.3 Conexões de Fiação

Follow these steps for safe and correct wiring:

1. Conexão da bateria: Connect the 48V battery to the designated battery ports (BAT+ and BAT-). Ensure correct polarity.
2. Entrada fotovoltaica: Connect your solar panel array to the PV ports (PV+ and PV-). Ensure the PV voltage is within the specified range (90-260Vdc MPPT range, max 300Vdc open circuit).
3. Entrada/Saída CA: Connect AC input from the grid or generator to the AC IN ports. Connect your loads to the AC OUT ports.
4. Aterramento: Connect the grounding wire to the grounding screw hold.

Image 6: A comprehensive wiring diagram showing connections for PV input, utility/generator input, battery, and inverter output.

Tamanhos de fio recomendados:

Conexão	Recommended Wire Diameter	Max atual
Entrada CA	10mm²/7AWG	40A
Entrada da bateria	25mm²/3AWG	120A (Charge) / 85A (Discharge)
Saída CA	10mm²/7AWG	30A (Inverter) / 40A (Bypass)

4.4 Parallel Installation (Optional)

For increased power, up to 6 units can be connected in parallel. Refer to the detailed wiring diagrams for single-phase, split-phase, and three-phase configurations in the full manual. Ensure all units are properly synchronized.

Image 7: Detailed illustration of single-phase, split-phase, and three-phase parallel connection setups for multiple inverters.

5. Operação

Tela LCD de 5.2 polegadas e configurações

The LCD screen provides real-time data and allows configuration of various parameters. Use the control buttons (SET, UP, DOWN, ENTER) to navigate menus and adjust settings.

• Prioridade de carregamento: Control how the battery bank is charged from different power sources (Solar Priority, Solar and AC input, Solar Only).
• Load Priority: Control how appliances are powered to prevent power interruptions (Solar Priority, AC Priority, DC Priority).

Image 8: The inverter's LCD screen showing options for Charging Priority and Load Priority settings.

5.3 Wi-Fi Monitoring

The inverter is equipped with a Wi-Fi module for real-time monitoring via a mobile application. Procurar "Smart Value" in your app store to download and install the application. This allows remote monitoring of the inverter's operating status.

Image 9: Illustration of the Wi-Fi module connection and the availability of the "Smart Value" mobile application for real-time monitoring.

6. Manutenção

• Limpeza regular: Keep the inverter clean and free from dust. Ensure ventilation openings are not blocked.
• Verificações de conexão: Verifique periodicamente se todas as conexões elétricas estão bem apertadas e se há sinais de corrosão.
• Saúde da bateria: Monitor battery status via the LCD or mobile app. Ensure batteries are maintained according to their manufacturer's guidelines.
• Atualizações de firmware: Check for available firmware updates to ensure optimal performance and access to new features.

7. Solução De Problemas

This section provides solutions to common issues. For more complex problems, contact customer support.

• Sem saída de energia: Check battery connections, PV input, and AC input. Ensure the inverter is powered on and not in fault mode.
• Indicador de falha ligado: Refer to the LCD display for specific fault codes and consult the detailed troubleshooting section in the full manual.
• Bateria não carregando: Verify PV panel connections and sunlight availability. Check charging mode settings.
• Proteção contra sobrecarga: If an overload occurs, the inverter will shut down. Reduce the load and restart the inverter.

Video 1: This video demonstrates how to communicate with the battery and computer for the 5000W Solar Inverter. While the model differs slightly, the communication principles for battery and computer interaction are similar and can aid in troubleshooting.

8. Especificações

Image 10: A table summarizing the technical specifications of the inverter, including power ratings, voltage, current, and communication features.

9. Garantia e suporte

For warranty information and technical support, please refer to the official Aninerel webou entre em contato com seu revendedor autorizado. Guarde o comprovante de compra como prova de aquisição.

Planos de proteção estão disponíveis para cobertura estendida:

• Plano de proteção de 2 anos
• Plano de proteção de 3 anos
• Proteção Completa: Um plano que cobre todas as compras elegíveis, passadas e futuras.