Manuais+

Caçador 44110

Manual do usuário do termostato programável Hunter 44110 Set & Save 5+2

Modelo: 44110

1. Introdução

This manual provides detailed instructions for the installation, operation, and maintenance of your Hunter 44110 Set & Save 5+2 Programmable Thermostat. Please read these instructions carefully before beginning installation or operation to ensure proper function and to avoid potential damage.

2. Informações de segurança

  • Sempre desligue a energia do sistema de aquecimento/arrefecimento no painel de fusíveis ou disjuntores principal antes de instalar ou fazer manutenção no termostato.
  • Este termostato foi projetado apenas para uso interno.
  • Do not short out the terminals on the gas valve or at the system controller to test the thermostat. This can damage the thermostat and void your warranty.
  • Ensure all wiring connections are secure and comply with local electrical codes. If you are unsure about any part of the installation, consult a qualified HVAC technician.
  • Mantenha as baterias fora do alcance das crianças. Se ingerido, procure atendimento médico imediatamente.

3. Conteúdo da embalagem

Verifique se seu pacote contém os seguintes itens:

  • Hunter 44110 Programmable Thermostat Unit
  • Acessórios de montagem (parafusos e buchas)
  • Manual do usuário (este documento)

Observação: São necessárias 2 pilhas AA para o funcionamento, que não estão incluídas na embalagem.

4. Instalação e configuração

4.1 Montagem do Termostato

Choose a location for your thermostat that is away from drafts, direct sunlight, and heat sources. It should be mounted on an interior wall, approximately 1.5 meters (5 feet) above the floor.

  1. Desligue a energia do seu sistema de aquecimento/arrefecimento no disjuntor principal.
  2. Remova o termostato antigo da parede.
  3. Separate the front cover of the Hunter 44110 thermostat from its base.
  4. Posicione a base do termostato contra a parede e marque os furos de montagem.
  5. Faça furos-guia e insira buchas de parede, se necessário.
  6. Fixe a base do termostato na parede utilizando os parafusos fornecidos.

4.2 Conexões de Fiação

The Hunter 44110 thermostat is compatible with most 24V heating and cooling systems. Refer to the wiring diagram provided with your specific HVAC system or consult a professional if you are unsure. Connect the wires from your system to the corresponding terminals on the thermostat base.

Voltar view of Hunter 44110 thermostat showing wiring terminals

Imagem: Voltar view of the Hunter 44110 thermostat, illustrating the wiring terminal block for connecting to your HVAC system.

4.3 Instalação da bateria

The thermostat requires two (2) AA alkaline batteries for operation. Install them into the battery compartment located on the back of the front cover, observing the correct polarity (+/-).

Dentro view of Hunter 44110 thermostat with battery compartment and basic instructions

Imagem: Dentro view of the Hunter 44110 thermostat, showing the battery compartment with two AA batteries installed, alongside basic operational instructions printed on the unit.

Once batteries are installed and wiring is complete, reattach the front cover to the base. Turn the power back on at the main circuit breaker.

5. Instruções de operação

Frente view of Hunter 44110 programmable thermostat with LCD display and control buttons

Imagem: Frente view of the Hunter 44110 programmable thermostat, displaying its LCD screen, 'F' (Function) button, and Up/Down arrow buttons for control.

5.1 Configurar a hora e o dia atuais

Refer to the full instructions at www.hunterfan.com for detailed steps on setting the current time and day. This is typically done by pressing a 'SET' or 'PROGRAM' button and using the Up/Down arrows to adjust values.

5.2 Programming the 5+2 Schedule

The 5+2 programming allows for separate schedules for weekdays (5 days) and weekends (2 days). This feature helps optimize energy usage.

  1. Access the program mode (consult full instructions for specific button presses).
  2. Set desired temperatures for up to four periods per day for weekdays.
  3. Set desired temperatures for up to four periods per day for weekends.
  4. Salve o programa.

5.3 Ajuste da temperatura

  • Para view the Set Temperature: Press the Up or Down arrow button for less than 1 second. The display will show the current set temperature.
  • To change the Set Temperature: Press and hold the Up or Down arrow button until the display flashes. Then, press the Up or Down arrow button again to adjust the temperature to your desired setting.

5.4 System and Fan Modes

The thermostat features switches for selecting system and fan modes, typically located behind the front cover or on the side.

  • Modos do sistema: HEAT, OFF, COOL. Select the appropriate mode for your desired operation.
  • Modos de ventilador: AUTO, ON. In AUTO mode, the fan runs only when the heating or cooling system is active. In ON mode, the fan runs continuously.

5.5 Temporary Overrides

You can temporarily override the programmed schedule by manually adjusting the temperature. The thermostat will maintain this new temperature until the next programmed period begins, or until you cancel the override.

6. Manutenção

6.1 Substituição da bateria

The thermostat will display a battery logo when the batteries are low and need replacement. Replace with two (2) fresh AA alkaline batteries. Ensure correct polarity.

6.2 Filter Monitor Reset

Quando