AMS F5848

AMS Radio-Controlled Wall Clock 5848

Modelo: F5848

1. Introdução

Thank you for choosing the AMS Radio-Controlled Wall Clock Model F5848. This modern silver wall clock is designed for precision timekeeping, automatically synchronizing with a radio time signal. Its elegant design, featuring a mineral glass and a large display, makes it a perfect addition to any room, especially a study. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your clock.

AMS Radio-Controlled Wall Clock 5848, front view

Figura 1.1: Frente view of the AMS Radio-Controlled Wall Clock 5848. This image shows the round silver and white clock face with black hour, minute, and second hands. The numbers 1 through 12 are clearly visible, with the AMS logo and a radio signal icon below the 12 o'clock position. The outer ring is silver-toned, and the inner face is white.

2. Informações de segurança

Please read all safety instructions carefully before using the clock. Keep this manual for future reference.

  • Segurança da bateria:
    • Use only the specified type and size of battery.
    • Insert batteries with correct polarity (+ and -). Incorrect insertion may cause damage.
    • Não misture pilhas velhas e novas, ou tipos diferentes de pilhas.
    • Remova as baterias descarregadas imediatamente para evitar vazamentos e danos.
    • If the clock is not used for a long period, remove the batteries to prevent leakage.
    • Mantenha as pilhas fora do alcance das crianças.
  • Precauções gerais:
    • Não exponha o relógio a temperaturas extremas, luz solar direta ou alta umidade.
    • Evite vibrações ou impactos fortes.
    • Do not disassemble or modify the clock. This will void the warranty.
    • Clean the clock only with a soft, dry cloth. Do not use abrasive cleaners or solvents.

3. Conteúdo da embalagem

Por favor, verifique o conteúdo da embalagem ao abri-la. Se algum item estiver faltando ou danificado, entre em contato com o vendedor.

  • AMS Radio-Controlled Wall Clock (Model F5848)
  • Manual do usuário (este documento)
  • (Battery may or may not be included depending on retailer/region)

4. Configuração

4.1. Instalação da bateria

  1. Localize o compartimento da bateria na parte traseira do relógio.
  2. Abra a tampa do compartimento da bateria.
  3. Insert one AA (or specified type) battery, ensuring the correct polarity (+ and -) as indicated inside the compartment.
  4. Feche bem a tampa do compartimento da bateria.

4.2. Initial Time Synchronization (Radio-Controlled)

Your AMS clock is radio-controlled and will automatically set itself to the correct time once batteries are installed and a signal is received. This process may take a few minutes to several hours depending on your location and signal strength.

  1. After inserting the battery, the clock hands will typically move to the 12 o'clock position and then stop. This indicates it is searching for the radio signal.
  2. Place the clock in an area with good radio signal reception. Avoid placing it near large metal objects, electronic devices, or in basements, which can interfere with the signal. A window-facing wall is often ideal.
  3. Once the signal is received, the clock will automatically adjust to the correct time. This usually happens within a few minutes, but can take longer.
  4. If the clock does not set itself after 24 hours, try relocating it to a different position or refer to the Troubleshooting section.

4.3. Montando o Relógio

The clock is designed for wall mounting.

  1. Choose a suitable location on a wall, ensuring it is sturdy enough to hold the clock's weight (approx. 1.6 kg).
  2. Use an appropriate wall anchor and screw (not included) for your wall type.
  3. Prenda o relógio com segurança usando o orifício para pendurar na parte de trás.

5. Operação

5.1. Exibição de tempo

The AMS Radio-Controlled Wall Clock displays time using traditional hour, minute, and second hands. The large display ensures easy readability from a distance.

5.2. Radio Signal Reception

The clock continuously monitors the radio time signal to maintain accurate time. In areas with poor reception, the clock may occasionally lose synchronization. It will attempt to re-synchronize automatically. If the signal is consistently weak, you may need to relocate the clock.

5.3. Manual Time Setting (If Applicable)

Most radio-controlled clocks do not have a manual time setting function, as they rely solely on the radio signal. If your clock has a small button or dial on the back (often labeled "M.SET" or similar), it may allow for manual adjustment in areas without signal. Refer to the specific markings on your clock's movement if automatic synchronization fails persistently.

6. Manutenção

6.1. Limpeza

To clean the clock, gently wipe the surface with a soft, dry, lint-free cloth. Do not use liquid cleaners, sprays, or abrasive materials, as these can damage the finish or the mineral glass.

6.2. Substituição da bateria

When the clock hands stop moving or the time becomes inaccurate, it is likely time to replace the battery. Follow the battery installation steps in Section 4.1. Always replace with a fresh, high-quality battery of the specified type.

6.3. Armazenamento

If you plan to store the clock for an extended period, remove the battery to prevent potential leakage and damage to the movement.

7. Solução De Problemas

ProblemaPossível causaSolução
Clock hands do not move or stop.Dead or low battery. Incorrect battery polarity.Replace battery with a fresh one, ensuring correct polarity.
O relógio mostra a hora incorreta ou não consegue sincronizar.Poor radio signal reception. Interference from other electronics.Relocate the clock to an area with better signal (e.g., near a window, away from electronics). Allow up to 24 hours for synchronization.
Clock loses time or gains time intermittently.Weak battery. Intermittent signal loss.Replace battery. Check for consistent signal reception.
Hands are misaligned (e.g., not pointing to 12 after reset).Internal mechanism issue or strong magnetic interference.Remove battery for 1 minute, then reinsert. Allow clock to re-synchronize. If problem persists, contact support.

8. Especificações

RecursoDetalhe
MarcaAMS
Número do modeloF5848
CorPrata
Dimensões do produto (C x L x A)31 x 4 x 213 cm (Note: 213cm height seems incorrect for a wall clock, likely a data entry error. Assuming 31x31cm for a round clock based on feature bullets and image.)
Actual Product Dimensions (Diameter x Depth): 31 x 4 cm (approx.)
MaterialGlass (Mineral Glass), Aluminum (Brushed Aluminum finish on ring)
Peso do item1.6 quilos
Tipo de exibiçãoAnalógico
EstiloModerno
Recurso especialLarge display, Radio-controlled
Fonte de energiaAlimentado por bateria
Tipo de quartoStudy Room (Suggested)
FormaRedondo

Nota: As especificações do produto estão sujeitas a alterações sem aviso prévio.

9. Garantia e suporte

9.1. Informações de garantia

Specific warranty terms and conditions for the AMS Radio-Controlled Wall Clock Model F5848 are provided by the manufacturer, AMS. Please refer to any warranty card included with your product or visit the official AMS webPara informações detalhadas sobre a garantia, consulte o site. Guarde o comprovante de compra para eventuais solicitações de garantia.

9.2. Suporte ao cliente

Para assistência técnica, resolução de problemas que não estejam contemplados neste manual ou questões relacionadas à garantia, entre em contato com:

  • Your retailer where the product was purchased.
  • The official AMS customer support channels (refer to the AMS web(site para detalhes de contato).

When contacting support, please have your model number (F5848) and purchase date ready.

Documentos relacionados - F5848

Préview Manual do Usuário do Relógio Radiocontrolado AMS 5898 / 5893
Instruções detalhadas para configurar e operar os relógios radiocontrolados AMS 5898 e AMS 5893, incluindo ajuste de hora, funções de alarme, exibição de temperatura e manutenção.
Préview Instruções de operação do relógio de parede AMS
Instruções de funcionamento para relógios de parede AMS, incluindo instalação e substituição de baterias, e uso geral em vários idiomas.
Préview Manual do Kit de Avaliação da Placa Adaptadora ams AS5600L
Este manual fornece informações completas sobre a placa adaptadora ams AS5600L-WL_EK_AB, incluindo conteúdo do kit, descrição da placa, instruções de montagem, detalhes de pinagem, operação no modo I2C, esquemas de hardware, layout da placa de circuito impresso e informações para pedidos.
Préview Manual do Usuário do Sensor de Posição Rotativa de 14 bits ams AS5048
Este manual do usuário fornece informações detalhadas sobre o ams AS5048, um sensor de posição rotativo de 14 bits com saída digital de ângulo e PWM. Ele abrange a placa adaptadora do AS5048, montagem, pinagem, casos de operação (SPI, Daisy Chain), codificação de firmware e exemplos.amples e esquemas de hardware. Essenciais para engenheiros que integram este sensor em seus sistemas.
Préview Manual do Kit de Avaliação da Placa Adaptadora ams AS5048
Este manual detalha a placa adaptadora ams AS5048 (AS5048-EK-AB), um kit de avaliação para o sensor de posição magnética AS5048. Ele abrange hardware, modos de operação (SPI, I2C), software e exemplos.amples e informações de contato da ams AG.
Préview AMS Clock Operating Instructions and Battery Replacement Guide
Instructions for operating and replacing the battery in AMS clocks, with multilingual guidance.