Casio TQ-218-8EF Analog Alarm Clock Instruction Manual

1. Produto acabadoview

This manual provides instructions for the Casio TQ-218-8EF Analog Alarm Clock. This device is designed for reliable timekeeping and alarm functionality, featuring a clear analog display and a snooze function. Please read this manual thoroughly before using your alarm clock to ensure proper operation and longevity.

Figura 1: Frente view of the Casio TQ-218-8EF Analog Alarm Clock. This image shows the clock's face with hour, minute, and second hands, along with the alarm hand. The clock features a grey plastic casing and a white dial.

2. Configuração

2.1. Instalação da bateria

The Casio TQ-218-8EF alarm clock requires two (2) AAA batteries for operation. Batteries are not included and must be purchased separately.

1. Localize a tampa do compartimento da bateria na parte traseira do despertador.
2. Deslize ou levante a tampa para abrir o compartimento.
3. Insert two new AAA batteries, ensuring the positive (+) and negative (-) terminals are aligned correctly according to the diagrams inside the compartment.
4. Recoloque a tampa do compartimento da bateria com segurança.

Observação: Always use fresh batteries and replace both batteries at the same time. Do not mix old and new batteries or different types of batteries.

3. Operação

3.1. Definição da hora

Para definir a hora atual:

1. Localize o Botão de ajuste de tempo on the back of the alarm clock.
2. Rotate the knob in either direction until the hour and minute hands display the correct current time.
3. Ensure the time is set accurately, especially considering AM/PM if applicable (though this is an analog clock, be mindful of 12-hour cycles).

3.2. Configurando o Alarme

Para definir a hora do alarme:

1. Localize o Alarm Setting Knob on the back of the alarm clock.
2. Rotate the knob until the alarm hand points to your desired wake-up time.
3. Localize o Chave liga / desliga do alarme (usually a small slide switch) on the side or back of the clock. Slide it to the 'ON' position to activate the alarm.

When the alarm time is reached, the clock will emit a loud alarm sound. The alarm sound is designed to be effective for heavy sleepers.

3.3. Função soneca

To use the snooze function:

1. Quando o alarme tocar, pressione o botão grande. Botão Soneca/Luz located on the top of the alarm clock.
2. The alarm will temporarily stop and will sound again after a few minutes (typically 5-10 minutes, depending on the model).
3. Para desligar completamente o alarme, deslize o Chave liga / desliga do alarme para a posição 'DESLIGADO'.

4. Manutenção

4.1. Limpeza

To clean your alarm clock:

• Limpe a parte externa do relógio com um pano macio e seco.
• Para sujeira persistente, levementeampMolhe o pano com água e detergente neutro e, em seguida, seque-o imediatamente.
• Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the casing e exibição.

4.2. Substituição da bateria

Replace the batteries when the clock's display becomes dim, the alarm sound weakens, or the clock stops functioning. Refer to Section 2.1 for detailed battery installation instructions. Always dispose of used batteries responsibly according to local regulations.

5. Solução De Problemas

6. Especificações

• Número do modelo: TQ-218-8EF
• Marca: Casio
• Tipo de exibição: Analógico
• Cor: Cinza
• Material: Plastic, Resin Frame
• Dimensões do produto: Approximately 3.94"W x 4.33"H (100mm x 110mm)
• Peso do item: Aproximadamente 5.6 onças (160 gramas)
• Fonte de energia: Alimentado por bateria
• Pilhas necessárias: 2 x AAA (não incluído)
• Características especiais: Alarm, Snooze Function
• Tipo de montagem: Mesa
• Tipo de quarto: Quarto

7. Garantia e Suporte

For warranty information and customer support, please refer to the warranty card included with your product or visit the official Casio website. You may also contact Casio customer service directly for assistance with product inquiries, troubleshooting, or repair services.

Casio Official Website: www.casio.com