Introdução
The CDN Dual Sensing Programmable Probe Thermometer and Timer (Model DSP1) is designed to accurately measure both the internal temperature of food and the ambient temperature of your oven or grill. This versatile tool assists in achieving precise cooking results and ensuring food safety. It features a durable stainless steel probe and cable, a clear digital display, and programmable alarms.
Imagem: Frente view of the CDN DSP1 thermometer with probe attached, displaying oven and food temperatures.
Principais características
- Dual Sensing Probe: Measures both food and oven/grill temperatures simultaneously.
- Ampla faixa de temperatura: 32 a 572 ° F (0 a 300 ° C).
- Alarmes programáveis: Set desired temperatures for food and oven; an alarm sounds when reached.
- Função do temporizador: Includes a 10-hour count up/down timer.
- Construção durável: 6.75-inch (17 cm) stainless steel probe with a 39-inch (1 m) sensor cable.
- Montagem versátil: Features a magnet for metal surfaces and a fold-out stand for countertops.
- Seleção de unidade: Alterne facilmente entre Fahrenheit e Celsius.
- Poder: Operates on 1 AAA battery (included).
Configurar
- Instalação da bateria:
Locate the battery compartment on the back of the unit. Insert one AAA battery, ensuring correct polarity. The display will activate.
- Conexão da sonda:
Insert the stainless steel probe's jack firmly into the port on the side of the thermometer unit.
Image: The CDN DSP1 thermometer with its probe securely plugged into the side port.
- Colocação:
Position the thermometer unit using either the magnetic back to attach it to a metal surface (e.g., oven door, refrigerator) or extend the fold-out stand for countertop use.
Imagem: Traseira view of the CDN DSP1 thermometer, highlighting the integrated magnet and the fold-out stand for versatile placement.
Instruções de operação
Medição de temperatura
- Inserir Sonda: Carefully insert the tip of the probe into the thickest part of the food, avoiding bone or gristle. For oven temperature, position the probe tip within the oven cavity, ensuring the cable is not pinched.
- Ligar: Pressione o LIGADO/DESLIGADO button to activate the thermometer.
- Selecione a unidade: Pressione o °F/°C button to toggle between Fahrenheit and Celsius display.
- Set Food Temperature Alarm:
- Pressione o MODO button until "FOOD" is selected.
- Pressione o CARNE button to cycle through pre-programmed meat types (e.g., Beef, Pork, Chicken) or press DEFINIR to manually adjust the target temperature using the HR e MÍNIMO botões.
- Imprensa ALERT ON/OFF to activate the alarm. The alarm will sound when the food reaches the set temperature.
- Set Oven Temperature Alarm:
- Pressione o MODO button until "OVEN" is selected.
- Imprensa DEFINIR to manually adjust the target oven temperature using the HR e MÍNIMO botões.
- Imprensa ALERT ON/OFF to activate the alarm. The alarm will sound when the oven reaches the set temperature.
Função de temporizador
- Selecione o modo temporizador: Pressione o MODO button until "TIMER" is selected.
- Definir hora: Use o HR e MÍNIMO buttons to set the desired countdown time (up to 10 hours).
- Iniciar/Parar: Pressione o INICIAR/PARAR button to begin or pause the countdown.
- Restabelecer: To clear the timer, press and hold the INICIAR/PARAR botão.
Manutenção
- Limpando a Sonda: Após cada utilização, limpe a sonda de aço inoxidável com um pano.amp cloth and mild detergent. Rinse thoroughly and dry completely. Do not immerse the probe cable connector or the main unit in water.
- Limpeza da unidade: Wipe the thermometer unit with a soft, damp pano. Não utilize produtos de limpeza abrasivos nem mergulhe a unidade em água.
- Armazenar: Store the thermometer and probe in a clean, dry place when not in use. Ensure the probe cable is not kinked or damaged.
- Substituição da bateria: Replace the AAA battery when the display becomes dim or unresponsive.
Image: The CDN DSP1 thermometer and its probe laid out on a wooden cutting board, ready for use or cleaning.
Solução de problemas
| Problema | Possível causa | Solução |
|---|---|---|
| Sem imagem ou imagem fraca | Bateria fraca ou descarregada; instalação incorreta da bateria. | Substitua a pilha AAA, certificando-se da polaridade correta. |
| Leituras de temperatura imprecisas | Probe not fully inserted; probe or cable damage; probe tip touching bone/gristle. | Ensure probe is fully inserted into the thickest part of the food. Avoid bone. Inspect probe and cable for damage. If damaged, replace the probe. |
| Alarme não soa | Alarm function not activated; volume too low. | Pressione o ALERT ON/OFF button to activate. Check for any volume settings (if applicable, though this model typically has a fixed alarm). |
| Probe not registering temperature | Probe not properly connected to the unit. | Ensure the probe jack is firmly seated in the port. |
Especificações
- Modelo: DSP1
- Faixa de temperatura: 32 a 572°F (0 a 300°C)
- Comprimento da sonda: 6.75 polegadas (17 cm)
- Comprimento do cabo: 39 polegadas (1 m)
- Fonte de energia: 1 pilhas AAA (incluídas)
- Tipo de exibição: LCD digital
- Materiais: Acrylonitrile Butadiene Styrene (ABS) casing, Stainless Steel probe and cable
- Características: Dual sensing, programmable alarms, timer, magnet/stand mounting
- Dimensões (unidade): Aproximadamente 7.5 cm (A) x 3 cm (L) x 0.625 cm (P)
Image: The CDN DSP1 thermometer with key dimensions indicated, showing its compact size.
Informações de garantia
CDN products are manufactured with quality materials and craftsmanship. For specific warranty details and terms, please refer to the documentation included with your product or visit the official CDN webGuarde o comprovante de compra como prova para eventuais solicitações de garantia.
Apoiar
For further assistance, product inquiries, or technical support, please contact CDN customer service. Contact information can typically be found on the product packaging or the official CDN website.
Fabricante: CDN
Website: www.cdn-timeandtemp.com
Telefone: 800-338-5594
