Manual do Usuário do Switch KVMP DVI de 4 Portas IOGEAR (GCS1104)

1. Introdução

The IOGEAR GCS1104 4-Port DVI KVMP Switch allows you to control up to four DVI-enabled computers from a single DVI monitor, USB keyboard, and USB mouse. This device also enables sharing of USB 2.0 peripherals, such as printers or scanners, and provides 2.1 channel audio support with microphone input across all connected computers. This manual provides detailed instructions for installation, operation, and troubleshooting to ensure optimal performance of your KVMP switch.

2. Conteúdo da embalagem

Por favor, verifique se todos os itens estão presentes em sua embalagem:

• 1 x 4-Port DVI KVMP Switch (GCS1104)
• 4 x DVI-D KVM Cable Sets (DVI, USB, Audio, Mic)
• 1 x adaptador de energia
• 1 x Manual do Usuário (este documento)

Image: The IOGEAR GCS1104 4-Port DVI KVMP Switch with all included cables and accessories.

3. Recursos do Produto

• Control up to 4 USB DVI computers from a single USB keyboard, mouse, and DVI monitor.
• Supports video resolutions up to 1920 x 1200 at 60Hz.
• Convenient computer switching via front panel pushbuttons or keyboard hotkeys.
• Independent hotkey switching for KVM focus, USB peripherals, and audio ports.
• Plug-and-play functionality; hot-pluggable.
• Firmware upgradeable for future compatibility and enhancements.
• Integrated 2-port USB 2.0 hub for peripheral sharing.
• IOGEAR's DynaSync technology reads and remembers monitor parameters (EDID) to prevent video resolution delays or changes during switching or booting.

4. Configuração

Follow these steps to properly set up your IOGEAR GCS1104 KVMP Switch:

1. Desligue todos os dispositivos: Ensure all computers, the monitor, and the KVMP switch are powered off before beginning connections.
2. Conectar dispositivos do console:
   • Connect your DVI monitor to the DVI-I port labeled 'CONSOLE' on the rear of the KVMP switch.
   • Connect your USB keyboard to the USB Type-A port labeled with a keyboard icon on the rear 'CONSOLE' section.
   • Connect your USB mouse to the USB Type-A port labeled with a mouse icon on the rear 'CONSOLE' section.
   • Connect your speakers to the green audio output jack and your microphone to the pink microphone input jack in the 'CONSOLE' section.
3. Conectar computadores: Para cada computador (até quatro):
   • Use one of the provided DVI-D KVM cable sets.
   • Connect the DVI-D connector of the cable to the DVI output of your computer and the corresponding DVI-I port (CPU 1-4) on the rear of the KVMP switch.
   • Connect the USB Type-A connector of the cable to an available USB port on your computer and the corresponding USB Type-B port (CPU 1-4) on the rear of the KVMP switch.
   • Connect the audio and microphone jacks of the cable to the respective ports on your computer and the corresponding audio/mic jacks (CPU 1-4) on the rear of the KVMP switch.
   • Importante: For initial setup, connect your keyboard and mouse directly to each computer's USB port first. Allow the operating system to load the necessary drivers. Once drivers are installed, disconnect them from the computer and connect them to the KVMP switch. This ensures proper recognition.
4. Connect USB 2.0 Peripherals: Connect any additional USB 2.0 peripherals (e.g., printer, scanner, external hard drive) to the two USB 2.0 Type-A ports on the front of the KVMP switch.
5. Aplicar energia: Connect the included power adapter to the DC 9V port on the rear of the KVMP switch, then plug it into a power outlet.
6. Ligar: Power on your monitor, then power on the connected computers. The KVMP switch will automatically detect the active computer.

Image: Rear panel connections of the GCS1104, illustrating ports for console devices and four computers.

Image: A visual guide demonstrating the connection process for computers, console, and USB 2.0 peripherals to the KVMP switch.

5. Operating the KVMP Switch

The IOGEAR GCS1104 offers multiple methods for switching between connected computers.

5.1. Front Panel Pushbutton Switching

Press the corresponding numbered button (1, 2, 3, or 4) on the front panel of the KVMP switch to instantly switch to the desired computer. The LED indicator above the button will illuminate to show the currently selected computer.

Image: Front panel of the GCS1104, highlighting the computer selection pushbuttons and the shared USB 2.0 port.

5.2. Troca de teclas de atalho

Hotkey combinations allow for quick switching directly from your keyboard. The default hotkey sequence is:

• Pressione o Bloqueio de rolagem key twice, then the computer's port number (1-4), and finally Digitar. Por exemploample, to switch to computer 2, press Bloqueio de rolagem, Bloqueio de rolagem, 2, Digitar.

The KVMP switch also supports independent switching of KVM focus, USB peripherals, and audio ports. Refer to the full product manual (available on the IOGEAR website) for advanced hotkey commands and customization options.

5.3. USB 2.0 Peripheral Sharing

The two USB 2.0 ports on the front of the switch allow connected peripherals to be shared among all four computers. When you switch to a different computer, the USB peripherals connected to these ports will automatically switch to that computer.

5.4. Audio and Microphone Sharing

The KVMP switch supports 2.1 channel audio and microphone input. Audio and microphone connections will switch along with the KVM focus by default. Independent audio switching may be available via hotkey commands.

6. Manutenção

To ensure the longevity and optimal performance of your IOGEAR GCS1104 KVMP Switch, follow these maintenance guidelines:

• Limpeza: Use a soft, dry cloth to clean the exterior of the switch. Avoid using liquid cleaners or aerosols, as they may damage the device.
• Ventilação: Ensure the switch has adequate ventilation. Do not block any ventilation openings.
• Gerenciamento de cabos: Keep cables organized and free from kinks or excessive bends to prevent damage and ensure reliable connections.
• Ambiente: Operate the switch within its specified temperature and humidity ranges (refer to specifications). Avoid extreme temperatures or moisture.

7. Solução De Problemas

If you encounter issues with your IOGEAR GCS1104 KVMP Switch, refer to the following common problems and solutions:

• No Keyboard or Mouse Functionality:
  • Ensure all USB cables are securely connected between the computers and the KVMP switch, and between the keyboard/mouse and the KVMP switch.
  • Verify that the keyboard and mouse drivers are properly installed on each computer. For initial setup, it is recommended to connect the keyboard and mouse directly to each computer first to allow driver installation, then reconnect them to the KVMP switch.
  • Try connecting a different keyboard or mouse to isolate if the issue is with the peripheral or the switch.
• No Video Display or Incorrect Resolution:
  • Check all DVI cable connections between the monitor, KVMP switch, and computers.
  • Ensure your monitor supports the resolution output by your computers. The GCS1104 supports up to 1920 x 1200.
  • The KVMP switch uses DVI-D connectors, which are digital only. It does not support DVI-A (analog) or VGA without an active digital-to-analog converter. Ensure your connections are DVI-D compatible.
  • IOGEAR's DynaSync technology should prevent resolution issues, but if problems persist, try rebooting the affected computer while it is selected on the KVMP switch.
• No Audio or Microphone Functionality:
  • Verify all audio and microphone cables are correctly connected to the KVMP switch and the respective ports on your computers and console devices.
  • Check audio settings on your operating system to ensure the correct playback and recording devices are selected.
• Interruptor não responde:
  • Ensure the power adapter is securely connected to the KVMP switch and a working power outlet.
  • Try power cycling the KVMP switch by disconnecting and reconnecting the power adapter.

8. Especificações

9. Garantia e Suporte

IOGEAR stands behind its products with comprehensive warranty and technical support services.

• Garantia: The IOGEAR GCS1104 KVMP Switch is backed by IOGEAR’s 3-year warranty. Warranty service is provided directly through the original manufacturer.
• Suporte técnico: Free lifetime technical support is available for this product. For assistance, please visit the official IOGEAR website ou entre em contato com o departamento de atendimento ao cliente.
• Atualizações de firmware: If your KVM switch is older than 2 years, please contact technical support before attempting any firmware updates to ensure compatibility and prevent potential issues.