Introdução
This manual provides detailed instructions for the installation, operation, and maintenance of your Lanzar VCT2610 2-Channel 6000 Watt MOSFET Car Audio Amplifier. Please read this manual thoroughly before attempting installation or operation to ensure proper use and to prevent damage to the unit or your vehicle's audio system. The Lanzar VCT2610 amplifier is designed to deliver high-quality audio performance for your car stereo system.
Informações de segurança
- Instalação profissional recomendada: Installation of car audio components can be complex. If you are unsure about any part of the installation process, seek assistance from a qualified professional installer.
- Desconecte a bateria: Always disconnect the vehicle's negative battery terminal before starting any electrical work to prevent short circuits and electrical shock.
- Fiação adequada: Ensure all wiring is correctly connected and insulated to prevent short circuits, overheating, and potential fire hazards. Use appropriate gauge wires for power and ground connections.
- Ventilação: Monte o ampInstale o amplificador em um local que permita circulação de ar adequada para evitar superaquecimento. Evite instalá-lo em espaços fechados sem ventilação.
- Proteção do fusível: O amplifier is equipped with internal fuses. Ensure external fuse protection is also used on the main power wire near the battery.
- Evite umidade: Não exponha o ampAmplificador de umidade ou água.
- Montagem segura: Monte com segurança o amplifier to prevent it from becoming a projectile in the event of a sudden stop or accident.
O que está na caixa
The Lanzar VCT2610 amplifier package includes the following items:
- 1 x Lanzar VCT2610 2-Channel Car Stereo Ampmais vivo
Image: The Lanzar VCT2610 amplifier shown with its packaging, highlighting its dimensions (21.97 inches length, 10.63 inches width) and confirming the inclusion of the 2-Channel Car Stereo Ampmais vivo.
Características
The Lanzar VCT2610 amplifier incorporates several features designed for optimal audio performance and reliability:
- Saída de alta potência: Delivers 3000W x 2 at 4 ohms or 6000W x 1 bridged at 2 ohms for robust audio.
- Full Range Crossovers: Features low/high pass variable crossover for precise audio tuning.
- Fonte de alimentação MOSFET: Utilizes Metal Oxide Semiconductor Field-Effect Transistors for efficient power delivery.
- Proteção contra curto-circuito: Equipped with 2x40 amp maxi type fuses to protect against thermal, overload, and short circuit conditions.
- Slim Size Design: Compact dimensions (10.63''W x 1.78''H x 21.97''L) for flexible installation.
- Silver-Plated RCA Ports: Ensures high conductivity and minimal signal loss.
- Fully Protected Circuitry: Integrated protection mechanisms for enhanced durability.
Configuração e instalação
Careful installation is crucial for the performance and longevity of your amplifier. Follow these steps for proper setup.
Montando o Ampmais vivo
Choose a mounting location that provides adequate ventilation and is protected from moisture. The slim design of the VCT2610 allows for versatile placement. Ensure the ampO amplificador é fixado com segurança a uma superfície sólida utilizando os acessórios de montagem fornecidos.
Image: The Lanzar VCT2610 amplifier installed in a vehicle's trunk, illustrating its compact and sturdy design for easy integration.
Conexões de fiação
Refer to the diagrams below for proper wiring of power, ground, remote, and audio signals.
Image: Rear panel of the Lanzar VCT2610 amplifier, detailing the power supply terminals (GND, REM, +12V), dual 60A power fuses, and speaker output connections.
Terminais de fonte de alimentação
- GND (Terra): Connect this terminal to a clean, unpainted metal surface of the vehicle chassis. Ensure a strong, low-resistance connection.
- REM (Ativação Remota): Conecte este terminal à saída de ativação remota da sua unidade principal. Este fio envia o sinal para a amplifier to turn on and off with your car's audio system.
- +12V (Alimentação): Connect this terminal directly to the positive terminal of your vehicle's battery. An inline fuse holder with an appropriate fuse (not included, but recommended in addition to the amplifier's internal fuses) should be installed within 18 inches of the battery.
Conexões de alto-falantes
Connect your speakers to the 'SPEAKER' terminals. Ensure correct polarity (+ to + and - to -) for optimal sound quality. The VCT2610 supports 2-channel stereo operation or can be bridged for mono output.
RCA Input and Line Output
Connect your head unit's RCA outputs to the 'INPUT' RCA jacks on the amplifier. The 'LINE OUT' RCA jacks provide an unamplified signal for connecting additional amplificadores em um multi-ampconfiguração do elevador.
Image: Top panel of the Lanzar VCT2610 amplifier, displaying the Low Level Input, Aux Line Outputs, Input Level Control, Sub Sonic Filter Switch, Crossover Mode Selector, Crossover Control, and Power LED.
Instruções de operação
Uma vez que o amplifier is correctly installed and wired, you can adjust its settings for optimal audio performance.
Controles e Indicadores
- Entrada de baixo nível (RCA): Connect your head unit's RCA pre-outs here.
- Aux Line Outputs (RCA): Provides a full-range signal for daisy-chaining to other amplificadores.
- Input Level Control (GAIN): Ajusta a sensibilidade de entrada do amplifier to match the output level of your head unit. Start with the gain at minimum and slowly increase until desired volume is achieved without distortion.
- Sub Sonic Filter Switch: Engages a filter to remove extremely low frequencies that are inaudible and can waste amppoder do lificador.
- Crossover Mode Selector (HPF/FULL/LPF):
- HPF (filtro passa-alta): Allows frequencies above the set crossover point to pass through, typically used for full-range speakers.
- COMPLETO: Bypasses the crossover, allowing all frequencies to pass through.
- LPF (filtro passa-baixo): Allows frequencies below the set crossover point to pass through, typically used for subwoofers.
- Crossover Control (FREQ): Adjusts the frequency point for the High Pass or Low Pass filter, depending on the Crossover Mode selected.
- Controle de aumento de graves: Aumenta a saída de graves em uma frequência específica. Use com moderação para evitar distorção.
- LED de alimentação (verde): Acende quando o ampO amplificador está ligado e funcionando normalmente.
- Protection LED (Red): Ilumina se o amplifier enters protection mode due to overheating, short circuit, or other fault conditions.
Manutenção
To ensure the longevity and optimal performance of your Lanzar VCT2610 ampPara manter o amplificador funcionando, siga estas simples orientações de manutenção:
- Mantenha limpo: Limpe regularmente o amplifier's exterior with a soft, dry cloth to remove dust and dirt. Avoid using harsh chemicals or abrasive cleaners.
- Garanta a ventilação: Verifique periodicamente se o ampAs aletas de resfriamento do amplificador estão livres de obstruções para permitir a dissipação adequada do calor.
- Verifique as conexões: Inspecione periodicamente todas as conexões de energia, aterramento, controle remoto e alto-falantes para garantir que estejam firmes e livres de corrosão. Conexões soltas podem causar mau funcionamento ou danos.
- Inspeção de fusíveis: Se o amplifier stops working, check the internal fuses (2x40A maxi type) and any external fuses. Replace blown fuses only with fuses of the same type and rating.
Solução de problemas
Se você tiver problemas com seu ampSe você tiver problemas com o amplificador, consulte o guia de solução de problemas a seguir antes de entrar em contato com o suporte.
| Problema | Possível causa | Solução |
|---|---|---|
| Sem energia / LED de energia desligado |
|
|
| LED de proteção aceso |
|
|
| Sem saída de som |
|
|
| Som distorcido |
|
|
Especificações
The following are the technical specifications for the Lanzar VCT2610 ampmais vital:
- Número do modelo: VCT2610
- Número de canais: 2
- Potência de saída: 3000 Watts RMS / 6000 Watts MÁX.
- Volume Mínimo de Fornecimentotage: 12 Volts
- Dimensões do item (C x L x A): 25.7 x 12.6 x 3.59 polegadas
- Peso do item: 13.2 libras
- Material: Metal
- Tipo de montagem: Montagem em superfície
- Código UPC: 068888897013
- Fabricante: Som ao redor
- Especificação atendida: FCC, CI
Garantia e Suporte
The Lanzar VCT2610 ampO lificador vem com um Garantia de 1 anos from the date of purchase. This warranty covers manufacturing defects under normal use. It does not cover damage caused by improper installation, accident, misuse, abuse, negligence, unauthorized modification, or normal wear and tear.
For technical support or warranty claims, please contact Lanzar customer service. Keep your proof of purchase for warranty validation.
