Oasis PG8ACSL Versa II Water Cooler Instruction Manual

Introdução e informações de segurança

This manual provides essential instructions for the safe installation, operation, and maintenance of your Oasis PG8ACSL Versa II Water Cooler. Please read all instructions carefully before installation and use to ensure proper function and to prevent injury or damage.

Produto acimaview

• The Oasis PG8ACSL is a split-level, refrigerated water cooler designed for durability and efficiency.
• Constructed from heavy-gauge galvanized steel with a stainless steel top and finish.
• Features energy and water conservation technology, including mechanically activated push pads and a water-saver bubbler.
• Equipped with a high-efficiency cooling system using R-134a refrigerant, delivering 8.0 gallons of chilled drinking water per hour.
• Includes a built-in 100-micron strainer to filter particles from the waterway.
• Designed to be ADA compliant when properly installed, ensuring accessibility.
• cUL listed and NSF/ANSI Standard 61, Annex G certified, ensuring quality and safety.
• Waterways are lead-free in materials and construction.

Instruções importantes de segurança

• Desligue sempre a energia antes de realizar qualquer serviço ou manutenção.
• Garanta o aterramento adequado para evitar choque elétrico.
• Não utilize o aparelho se o cabo de alimentação estiver danificado.
• Installation must comply with all local plumbing and electrical codes.
• Mantenha as aberturas de ventilação livres de obstruções.

Configuração e instalação

Proper installation is crucial for the performance and longevity of your water cooler. It is recommended that installation be performed by a qualified plumber and electrician.

Desembalagem e inspeção

1. Carefully remove the water cooler from its packaging.
2. Inspecione a unidade para verificar se há danos causados ​​pelo transporte. Informe imediatamente qualquer dano ao seu fornecedor.
3. Ensure all components, including any plumbing tools, are present.

Requisitos de localização

• Install on a sturdy, level surface capable of supporting the unit's weight (approximately 64 lbs).
• Garanta espaço livre suficiente ao redor da unidade para ventilação e acesso para manutenção.
• Locate near a suitable cold water supply line and a drain.
• Ensure a properly grounded 120VAC, 4.4 Amp electrical outlet is available.

Conexão de encanamento

1. Turn off the main water supply before beginning plumbing work.
2. Connect the water supply line to the inlet connection on the water cooler. Refer to local plumbing codes for specific requirements.
3. Certifique-se de que todas as conexões estejam seguras e sem vazamentos.
4. Lave bem as tubulações de água antes de conectar o aparelho para remover quaisquer detritos.

Conexão elétrica

1. Ensure the electrical supply matches the unit's requirements (120VAC, 4.4 Ampe).
2. Plug the polarized plug into a dedicated, properly grounded electrical outlet.
3. Não utilize extensões ou adaptadores.

Verificações finais

• Verifique se a unidade está nivelada e estável.
• Check for any leaks in the plumbing connections.
• Ensure side and front panels are securely in place after installation, as they provide access for maintenance.
• Confirm ADA compliance for proper height and clear floor space if applicable.

Imagem: Frente view of the Oasis PG8ACSL Versa II Water Cooler, showcasing its stainless steel finish and dual-level design.

Instruções de operação

The Oasis PG8ACSL water cooler is designed for simple and reliable operation.

Dispensando Água

1. Once the unit is properly installed and connected to power and water, it will begin chilling water. Allow approximately 30 minutes for the water to reach optimal cold temperature.
2. To dispense water, press either the front or side push pad. The bubbler will activate, providing a stream of water.
3. Release the push pad to stop the water flow.

Image: A person using the Oasis PG8ACSL water cooler, demonstrating the activation of the bubbler by pressing the side push pad.

Adjusting Stream Height

The water stream height can be adjusted externally. Locate the stream height adjustment screw, typically near the bubbler, and turn it clockwise to decrease the stream height or counter-clockwise to increase it. Adjust as needed to prevent splashing and ensure comfortable use.

Manutenção

Regular maintenance ensures optimal performance and extends the life of your Oasis water cooler. Always disconnect power before performing maintenance.

Limpeza do Exterior

• Wipe down the stainless steel exterior and basin regularmente com um suave, damp pano e sabão neutro.
• Evite produtos de limpeza abrasivos ou esponjas de aço, que podem danificar o acabamento.
• Ensure the fountain basin is kept clean to eliminate standing water and prevent mineral buildup.

Strainer Cleaning

The unit features a built-in 100-micron strainer to prevent particles from entering the waterway. Periodically, this strainer may need cleaning, especially if water flow decreases.

1. Desligue o abastecimento de água da unidade.
2. Desligue a fonte de alimentação.
3. Access the strainer, typically located near the water inlet. Refer to the unit's internal diagrams if necessary (access may require removing side or front panels).
4. Remove and rinse the strainer under clean running water to clear any accumulated debris.
5. Reinstall the strainer, reconnect water and power, and check for leaks.

Limpeza da Serpentina do Condensador

The condenser coils should be cleaned annually or more frequently in dusty environments to maintain cooling efficiency. Access to the coils typically requires removing the side or front panels.

• Desconecte a energia da unidade.
• Remove the appropriate panels to access the condenser coils.
• Use a brush or vacuum cleaner to gently remove dust and lint from the coils.
• Replace panels and reconnect power.

Solução de problemas

This section addresses common issues you might encounter with your water cooler. For problems not listed here, contact customer support.

Especificações

Informações de garantia

Oasis provides a limited 5-year warranty for the PG8ACSL Versa II Water Cooler. This warranty covers defects in materials and workmanship under normal use and service. For specific terms, conditions, and to register your product, please refer to the warranty card included with your purchase or visit the official Oasis website.

Suporte ao cliente

If you require assistance with installation, operation, maintenance, or troubleshooting beyond the scope of this manual, please contact Oasis customer support.

• Suporte online: Visit the official Oasis webSite com perguntas frequentes, documentação do produto e formulários de contato.
• Serviço técnico: For technical inquiries or service requests, please refer to the contact information provided on the Oasis website ou sua documentação de compra.

When contacting support, please have your model number (PG8ACSL) and serial number ready.