Introdução
The Taylor Pro Digital 4-Event Timer is designed to track up to four separate timing events simultaneously. This device features a large LCD display for clear visibility and offers versatile placement options with its integrated magnets and built-in stand. It supports countdown timing up to 99 hours, 59 minutes, and 59 seconds, and includes a memory function for recalling previous settings.
Figura 1: Frente view of the Taylor Pro Digital 4-Event Timer.
Informações de segurança
WARNING: This product contains button cell batteries. Swallowing a button cell battery can cause severe internal burns in as little as 2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
Figure 2: Button cell battery safety warning.
Conteúdo da embalagem
- Taylor Pro Digital 4-Event Timer (Model 5862)
- Manual de instruções
- 2 x Product Specific Batteries (pre-installed or included separately)
Características do produto
- Four Independent Timers: Track up to four events simultaneously.
- Grande display LCD: 0.8-inch display for clear time readings.
- Colocação versátil: Strong magnets for metal surfaces and a built-in stand for countertops.
- Extended Countdown: Sets times up to 99 hours, 59 minutes, 59 seconds.
- Distinctive Alarms: Each timer has a unique beep pattern.
- Função de memória: Recalls the last set time for each event.
Figura 3: Detalhado view of the timer's display and control buttons.
Configurar
Instalação da bateria
- Localize o compartimento da bateria na parte traseira do temporizador.
- Abra a tampa do compartimento.
- Insert two product-specific batteries, ensuring correct polarity (+/-).
- Feche bem a tampa do compartimento da bateria.
Ligação inicial
Once batteries are installed, the timer should automatically power on and display '00:00:00' or the current time if a clock function is present (refer to display for confirmation).
Instruções de operação
Selecting a Timer (T1, T2, T3, T4)
Pressione o T1/T2/T3/T4 buttons to select the desired timer. The active timer will be indicated on the display.
Setting a Countdown Timer
- Select the desired timer (T1-T4).
- Pressione o HR botão para definir horas, MÍNIMO for minutes, and SEC for seconds. Each press increases the value. Hold the button for faster adjustment.
- To clear a set time, press the CLARO button while the timer is selected and stopped.
Starting and Stopping a Timer
- After setting the desired time, press the INICIAR/PARAR botão para iniciar a contagem regressiva.
- Para pausar a contagem regressiva, pressione INICIAR/PARAR de novo.
- Para retomar, pressione INICIAR/PARAR mais uma vez.
Função de alarme
When a timer reaches zero, it will emit an audible alarm. Each of the four timers has a distinct alarm sound to help differentiate between events. Press any button to silence the alarm.
Função de memória
The timer automatically stores the last set time for each of the four events. To recall a previously set time, select the desired timer (T1-T4) and press the MEMÓRIA button. The last set time for that specific timer will be displayed.
Manutenção
Limpeza
Limpe o cronômetro com um pano macio e damp pano. Não utilize produtos de limpeza abrasivos nem mergulhe a unidade em água.
Substituição da bateria
When the display becomes dim or the timer functions erratically, it is time to replace the batteries. Follow the battery installation steps outlined in the Setup section.
Solução de problemas
| Problema | Possível causa | Solução |
|---|---|---|
| A tela está em branco ou com brilho reduzido. | Baterias fracas ou descarregadas. | Substitua as pilhas por novas, certificando-se de que a polaridade está correta. |
| O temporizador não inicia. | Time not set or START/STOP not pressed. | Ensure a time is set for the selected timer. Press START/STOP. |
| O alarme não está soando. | Volume setting too low (if applicable) or timer not reaching zero. | Ensure timer counts down to zero. Check for any mute function (if available). |
| Os botões não respondem. | Low batteries or internal malfunction. | Substitua as pilhas. Se o problema persistir, entre em contato com o suporte ao cliente. |
Especificações
- Número do modelo: 5862
- Marca: Taylor
- Material: Plástico
- Cor: Branco/Verde
- Peso do item: 2.4 onças
- Dimensões do produto: 7 x 5.1 x 6.68 polegadas
- Tamanho da tela: 0.8 polegadas (LCD)
- Número de temporizadores: 4
- Max Countdown: 99 Hours, 59 Minutes, 59 Seconds
- Baterias: 2 Product Specific batteries (required)
Garantia
This Taylor Pro Digital 4-Event Timer (Model 5862) comes with a Garantia de 1 ano covering parts and labor from the date of purchase. This warranty does not cover damage caused by misuse, accident, unauthorized modifications, or normal wear and tear. Please retain your proof of purchase for warranty claims.
Apoiar
For further assistance, troubleshooting not covered in this manual, or warranty inquiries, please contact Taylor customer support. Refer to the product packaging or the official Taylor website para obter as informações de contato mais atualizadas.
