Strymon blueSky V.1 Reverb Pedal Instruction Manual

Introdução

The Strymon blueSky V.1 Reverb Pedal is a high-quality digital reverb unit designed for guitarists and other musicians seeking versatile and studio-grade reverb effects. It offers a range of reverb types and adjustable parameters to shape your sound, from subtle ambience to expansive soundscapes.

Principais características

• Three primary reverb modes: Normal, Modulado, e Brilho.
• Three reverb types: Placa, Sala, e Primavera.
• Comprehensive control over Decadência, Pré-atraso, Baixo Damp, Alto Damp, e Mistura.
• Durable aluminum construction for road-worthiness.
• Stereo input and output capabilities for flexible signal routing.
• Dedicado Favorito switch for saving and recalling a preferred setting.
• True bypass switching to preserve your dry tone when the effect is off.

Configurar

Conexão de energia

Connect a 9VDC power supply (center-negative) to the 9VDC input jack on the rear of the pedal. Ensure the power supply meets the pedal's specifications (9VDC, 250mA minimum) to prevent damage and ensure optimal performance.

Conexões de áudio

The blueSky pedal supports both mono and stereo operation. Use high-quality 1/4-inch instrument cables for all audio connections.

Descrição da imagem: Um close-up view of the rear panel of the Strymon blueSky V.1 Reverb Pedal. It features four 1/4-inch audio jacks labeled "LEFT IN", "RIGHT IN", "LEFT OUT", and "RIGHT OUT". To the far right is a 9VDC power input jack.

Configuração Mono

Connect your instrument or the output of a preceding pedal to the LEFT IN Conecte o conector. ABANDONADO jack para o seu ampamplificador ou a entrada do próximo pedal na sua cadeia de sinal.

Configuração estéreo

Connect the stereo output from your preceding device to the LEFT IN e RIGHT IN jacks. Connect the ABANDONADO e DIRETO PARA FORA conecta-se ao seu aparelho de som amplifier setup or other stereo processing units.

Controles operacionais

The blueSky pedal features several knobs and switches to precisely tailor your reverb sound.

Maçanetas

• DECADÊNCIA: Controls the length of the reverb tail. Turn clockwise for longer, more expansive decay times.
• PRÉ-ATRASO: Adjusts the time before the reverb effect begins after the dry signal. Useful for maintaining clarity of the dry signal, especially with longer decay times.
• BAIXO DAMP: Controls the damping of low frequencies within the reverb. Turn clockwise to reduce low-frequency content in the reverb tail, preventing muddiness.
• ALTO DAMP: Controls the damping of high frequencies within the reverb. Turn clockwise to reduce high-frequency content, creating a warmer, darker reverb.
• MISTURA: Blends the dry (unaffected) signal with the wet (reverb) signal. Fully counter-clockwise is 100% dry, fully clockwise is 100% wet.

Interruptores

• MODO (Toggle Switch): Selects the reverb mode, altering the character of the reverb tail.
  • NORMA: Provides a standard, unmodulated reverb sound.
  • MOD: Adds subtle modulation (chorus-like effect) to the reverb tail for a richer, more ethereal sound.
  • SHIMMER: Adds an octave-up effect to the reverb tail, creating a bright, angelic, and atmospheric texture.
• TIPO (Toggle Switch): Selects the fundamental reverb algorithm.
  • PLACA: Emulates a classic plate reverb, known for its bright, dense, and smooth sound.
  • SALA: Simulates the natural reverberation of a physical room, offering a versatile and realistic space.
  • PRIMAVERA: Recreates the sound of a vintage spring reverb tank, characterized by its distinctive "drip" and metallic qualities.

Pedais

• DESVIAR: Toggles the effect on and off. When the effect is off, the signal passes through unaffected (true bypass). The corresponding LED indicates the effect status.
• FAVORITO: Recalls a saved preset. To save a preset, adjust the knobs and switches to your desired setting, then press and hold the FAVORITE footswitch until the LED flashes, indicating the preset has been saved.

Especificações

Manutenção

Limpeza

Use a soft, dry cloth to clean the pedal's exterior. Avoid abrasive cleaners, solvents, or harsh chemicals, which may damage the finish or internal components.

Armazenar

Store the pedal in a cool, dry environment away from direct sunlight, extreme temperatures, and excessive humidity. When not in use for extended periods, disconnect the power supply.

Cuidados Gerais

Avoid dropping the pedal or subjecting it to excessive force. Ensure all cables are connected securely to prevent intermittent signal loss or damage to the jacks.

Solução de problemas

Sem som

• Verify the power supply is correctly connected and functioning. Ensure it is a 9VDC center-negative supply.
• Check all audio cable connections. Ensure they are fully inserted into the input and output jacks.
• Confirm the pedal is not in bypass mode if you expect an effect. The BYPASS LED should be illuminated.
• Test with different cables, power supply, and ampAmplificador para isolar o problema.

Unexpected Noise

• Ensure your power supply is isolated and provides clean power to avoid ground loops or hum.
• Check for faulty or unshielded cables, which can introduce noise.
• Reduzir o MISTURA knob setting if the reverb is overwhelming the dry signal or causing feedback.

Efeito não envolvente

• Pressione o DESVIAR footswitch to ensure the effect is active. The corresponding LED should illuminate.
• If attempting to recall a preset with the FAVORITO switch, ensure a preset has been properly saved to that switch.

Garantia e Suporte

Informações de garantia

This product is covered by the manufacturer's warranty. Please refer to the official Strymon website or your purchase documentation for specific warranty terms and conditions, including registration requirements and coverage details.

Suporte Técnico

For technical assistance, product registration, or further information regarding your Strymon blueSky V.1 Reverb Pedal, please visit the official Strymon website em www.strymon.net. You can also find additional resources, FAQs, and contact information on the Strymon support pages.