Produto acimaview
The Klein Tools NCVT-2 is a dual-range non-contact voltage tester designed for automatically detecting both low voltage e vol padrãotage in electrical systems. It features visual and audible indicators to alert users to the presence of AC voltage, enhancing safety during electrical work. Its durable construction and compact design make it a reliable tool for professionals and DIY enthusiasts.
Principais características:
- Automatic Dual-Range Detection: Automatically detects low voltage (12-48 VAC) and standard voltage (48-1000 VCA).
- Operação sem contato: Detecta com segurança a tensão CAtage sem contato direto com condutores.
- Visual and Audible Indicators: A bright green LED indicates the tester is operational. Flashing red LED and distinct warning tones signal voltage detecção.
- Worklight Functionality: High-intensity green LED also functions as a worklight for illuminating dark areas.
- Desligamento Automático: Conserves and extends battery life.
- Construção durável: Lightweight, durable polycarbonate plastic resin construction with 9.8-foot / 3 m drop protection.
- Classificação de segurança: CAT IV 1000V safety rating, conforms to CE requirements.
Informações de segurança
AVISO: Read, understand, and follow all warnings, cautions, safety information, and instructions in this manual before operating or servicing this tester. Failure to follow instructions could result in death or serious injury.
- Nunca presuma que fios neutros ou terra estejam desenergizados. Neutros em circuitos de derivação multifios podem ser energizados quando desconectados e devem ser testados novamente antes do manuseio.
- Always test on a known live circuit before and after use to ensure the tester is functioning correctly.
- Do not use if the tester appears damaged or is not operating properly.
- Respeite todas as normas de segurança locais e nacionais.
Configurar
Instalação da bateria:
- Unscrew the cap at the rear of the tester.
- Insert two (2) 1.5V AAA Alkaline batteries, ensuring correct polarity (+/-).
- Recoloque a tampa no testador, apertando-a firmemente.
- Press the power button to confirm the green LED illuminates, indicating proper battery installation and functionality.
Figure 1: Klein Tools NCVT-2 Voltage Tester, showing the overall design and cap for battery access.
Instruções de operação
Ligar/desligar e seleção de modo:
- Para ligar: Press and hold the power button for approximately 1 second. The green LED will illuminate, indicating the tester is ready for use in dual-range mode (12-1000 VAC).
- To Switch to Standard Voltage Only Mode: While the tester is on, press the power button briefly. The blue LED will turn off, and the green LED will remain on, indicating standard voltage detection (48-1000 VAC).
- To Switch Back to Dual-Range Mode: Press the power button briefly again. The blue LED will illuminate along with the green LED.
- Para desligar: Press and hold the power button until the LEDs turn off. The tester also features an auto power-off function after a period of inactivity to conserve battery life.
Volumetage Detecção:
- Ensure the tester is powered on and the green LED is illuminated.
- Place the tip of the tester near the conductor, outlet slot, or insulated wire you wish to test.
- Se AC voltage is detected, the red LED will flash, and an audible tone will sound. The frequency of the beeps and flashes increases as the tester gets closer to the voltage fonte.
- Para baixo voltage (12-48 VAC) detection, ensure the tester is in dual-range mode (green and blue LEDs illuminated).
- Para volume padrãotage (48-1000 VAC) detection, either dual-range mode or standard voltage only mode can be used.
Figure 2: Using the NCVT-2 to test for voltage in an electrical outlet.
Worklight Function:
- The high-intensity green LED at the tip of the tester can be used to illuminate the workspace, especially in dimly lit areas.
Manutenção
- Substituição da bateria: Replace batteries when the green LED fails to illuminate or the tester does not respond as expected. Refer to the 'Battery Installation' section for instructions.
- Limpeza: Wipe the tester with a dry, lint-free cloth. Do not use abrasive cleaners or solvents.
- Armazenar: Guarde o testador em local fresco e seco, longe da luz solar direta e de temperaturas extremas.
Solução de problemas
- Tester does not turn on: Verifique a instalação da bateria e substitua as baterias, se necessário.
- Leituras inconsistentes: Ensure the tester tip is close enough to the conductor. Test on a known live circuit to verify functionality. Environmental factors or interference can sometimes affect readings.
Especificações
| Especificação | Valor |
|---|---|
| Marca | KLEIN TOOLS |
| Número do modelo | NCVT-2 |
| Fonte de energia | 2 pilhas alcalinas AAA de 1.5 V (incluídas) |
| mín. Volume Operacionaltage | 12 Volts AC |
| máx. Volume Operacionaltage | 1000 Volts AC |
| Classificação de segurança | CATIV 1000V |
| Proteção contra quedas | 9.8 pés / 3 m |
| Peso do item | 0.8 onças |
| Material | Polycarbonate Plastic Resin |
| Características especiais | 50 - 500 Hz Low-Pitched Pulsing Beeping Sound; Blue LED Turns Off and Red LED Blinks (Approximately 2x Per Second) |
Garantia e Suporte
The Klein Tools NCVT-2 Voltage Tester comes with a Garantia de 2 ano a partir da data da compra.
For technical support, troubleshooting assistance, or warranty claims, please visit the official Klein Tools website ou entre em contato com o departamento de atendimento ao cliente.
Figure 3: Klein Tools NCVT-2 Voltage Tester, showcasing its dual-range capabilities and safety features.
