Manual do Usuário do Projetor DLP Portátil InFocus IN112

1. Introdução

This manual provides essential information for the safe and efficient operation of your InFocus IN112 Portable DLP Projector. Please read these instructions thoroughly before using the projector and retain them for future reference.

The InFocus IN112 is designed for versatile use, offering high brightness and a strong contrast ratio. It incorporates BrilliantColor technology for clear image reproduction and is 3D-ready. Its compact and lightweight design facilitates easy portability and installation.

2. O que está na caixa

Verifique se todos os itens listados abaixo estão incluídos na embalagem do seu produto:

• Projetor InFocus IN112
• Cabo de alimentação
• RGB cable (VGA cable)
• A/V cable (Composite Video cable)
• Instruções de segurança
• Manual do usuário (este documento)
• Controle remoto

3. Projetor sobreview

Figura 1: parte superior View - Displays the control panel with buttons for power, source selection, menu navigation, and keystone adjustment, along with the focus ring for the lens.

Figura 2: Lateral View - Shows the ventilation grilles essential for heat dissipation during operation. Ensure these are not obstructed.

Figura 3: Angulado View com remoto - Illustrates the projector from an angle, highlighting the lens and the included remote control for convenient operation.

Figura 4: Traseira View - Details the various input and output ports, including power, audio in/out, video, computer (VGA), RS232, and Mini USB.

4. Configuração

4.1 Posicionamento

Position the projector on a stable, flat surface or mount it securely. Ensure adequate ventilation around the projector to prevent overheating. The distance from the screen will determine the image size. Adjust the projector's position to achieve the desired image size and clarity.

4.2 Conexão de Energia

1. Connect the supplied power cord to the projector's power inlet.
2. Conecte a outra extremidade do cabo de alimentação a uma tomada elétrica aterrada.

4.3 Conectando as fontes de entrada

The IN112 projector offers multiple input options:

• VGA (Computer In 1 & 2): Use the RGB cable to connect to a computer's VGA output.
• Vídeo Composto: Use the A/V cable to connect to devices with composite video output.
• S-Vídeo: Connect to devices with S-Video output.
• Entrada de áudio: Conecte fontes de áudio externas usando um cabo estéreo de 3.5 mm.
• RS232C: For control and automation systems.
• USB B Mini: For control and firmware updates.

Ensure all cables are securely connected before powering on the projector.

5. Instruções de operação

5.1 Ligar/Desligar

• Para ligar, pressione o botão Poder button on the control panel or remote control. The power indicator light will illuminate.
• Para desligar, pressione o Poder Pressione o botão novamente. Confirme o desligamento, se solicitado. Deixe o projetor esfriar antes de desconectá-lo da tomada.

5.2 Ajuste de Imagem

• Foco: Gire o anel de foco na lente do projetor até que a imagem fique nítida e clara.
• Keystone: Use o Pedra angular buttons on the control panel or remote to correct trapezoidal image distortion if the projector is not perfectly perpendicular to the screen.

5.3 Seleção da fonte

Pressione o Fonte button on the control panel or remote control to cycle through available input sources (VGA1, VGA2, Video, S-Video).

5.4 Menu de Navegação

Pressione o Menu/Sair button to access the on-screen display (OSD) menu. Use the arrow buttons to navigate and the Selecione or Digitar Botão para confirmar as seleções. Pressione Menu/Sair Novamente, para fechar o menu.

5.5 Modo Eco

Activate Eco Mode to extend lamp life and reduce power consumption. This mode is suitable for environments with lower ambient light. The lamp life is approximately 6,000 hours in Eco Mode compared to 5,000 hours in normal mode.

5.6 3D Content Projection

The IN112 is 3D-ready. To project 3D content, you will need compatible 3D source material, a 3D-capable player, and active 3D glasses (sold separately). Refer to your 3D source device's manual for specific setup instructions.

6. Manutenção

6.1 euamp Substituição

O projetor lamp tem uma vida útil finita. Quando o lamp indicador (Temp/Lamp) illuminates or the image brightness significantly decreases, the lamp may need replacement. The lamp door is conveniently located on the top of the projector for easy access, even when installed.

Cuidado: Ensure the projector is powered off and completely cooled before attempting lamp replacement. Refer to the detailed lamp replacement instructions in the full service manual for safety and proper procedure.

6.2 Limpeza

The IN112 projector is designed without filters, eliminating the need for filter cleaning or replacement. Periodically wipe the exterior casing with a soft, dry cloth. For the lens, use a specialized lens cleaning cloth and solution to avoid scratches.

7. Solução De Problemas

8. Especificações

9. Garantia e Suporte

9.1 Garantia do Produto

The InFocus IN112 projector is backed by a comprehensive warranty:

• Garantia limitada de 5 ano no projetor.
• Garantia total de 2 ano cobrindo peças e mão de obra.
• Garantia de 6 meses no lamp.

Please retain your proof of purchase for warranty claims. For detailed terms and conditions, refer to the official InFocus warranty documentation or visit the InFocus website.

9.2 Suporte Técnico

For technical assistance, troubleshooting, or service inquiries, please contact InFocus customer support. Contact information can typically be found on the InFocus official website ou na documentação incluída.

10. Related Product Information (IN130 Series)

The following video provides an overview of features found in the InFocus IN130 Series projectors. While specific models may vary, many core functionalities and design principles are shared across InFocus projector lines, offering general insight into InFocus projector capabilities.