Introdução
The AKG C520 is a professional head-worn condenser microphone designed for hands-free vocal performance. It offers a wide dynamic range for clear vocal sound, making it suitable for vocalists, keyboardists, drummers, guitarists, and dancing performers. Its design incorporates features to ensure durability and high-quality audio in various live performance settings.
O que está incluído
The AKG C520 package typically includes the following components:
- C520 Head-Worn Microphone with Standard XLR Connector
- W44 Windscreen
Guia de configuração
- Ajuste a faixa de cabeça: Carefully place the headset on your head. Adjust the headband for a secure yet comfortable fit. The lightweight design allows for extended wear without discomfort.
- Position the Boom Arm: The microphone boom arm can be mounted on either the left or right side of the headband. Position the boom arm so that the microphone capsule is approximately 1-2 inches from the corner of your mouth. This precise positioning helps optimize sound capture and minimize plosives.
- Attach the Windscreen: Slide the W44 windscreen over the microphone capsule. The windscreen helps reduce breath noises and plosives, especially in live performance environments.
- Conecte o cabo XLR: Connect the standard XLR connector of the C520 microphone to a compatible audio input on your mixing console, amplifier, or audio interface. Ensure the connection is firm.
- Ativar energia fantasma: The AKG C520 is a condenser microphone and requires poder fantasma (typically +48V) to operate. Ensure that phantom power is activated on the input channel of your connected audio device. Without phantom power, the microphone will not function.
Instruções de operação
- Posicionamento do microfone: The C520 features a cardioid polar pattern, which is most sensitive to sound from the front and rejects sound from the sides and rear. This helps minimize feedback and unwanted ambient noise. Ensure the microphone capsule is pointed directly towards your mouth for optimal vocal capture.
- Ganhostaging: Set the input gain on your mixer or audio interface to an appropriate level. Start with the gain low and gradually increase it while speaking or singing into the microphone until a strong, clear signal is achieved without clipping (distortion).
- Proteção contra umidade: The integrated moisture shield prevents perspiration from reaching the transducer element, ensuring consistent performance even during energetic activities.
- Redução de ruído: The transducer shock mount effectively reduces mechanical noise, body noise, and handling noise, providing a cleaner audio signal.
Manutenção
- Limpeza: Use a soft, dry cloth to wipe down the headband and boom arm after each use. For the microphone capsule and windscreen, gently remove any debris. Avoid using harsh chemicals or abrasive materials.
- Cuidados com o pára-brisa: The W44 windscreen can be carefully removed and cleaned with mild soap and water if necessary. Ensure it is completely dry before reattaching.
- Armazenar: Store the microphone in a clean, dry place, preferably in its original packaging or a protective case, to prevent dust accumulation and physical damage. Avoid extreme temperatures and humidity.
- Inspeção de cabos: Periodically check the XLR cable for any signs of wear, fraying, or damage. Damaged cables can affect audio quality and reliability.
Solução de problemas
| Problema | Possível causa | Solução |
|---|---|---|
| Nenhuma saída de som | Phantom power not activated; incorrect connection; faulty cable. | Ensure +48V phantom power is enabled on the mixer/interface. Check all cable connections. Test with a different XLR cable if available. |
| Som baixo ou fraco | Low input gain; microphone too far from mouth. | Increase input gain on your audio device. Adjust the boom arm to position the microphone closer to your mouth (1-2 inches). |
| Som distorcido | Input gain too high; microphone too close to mouth (plosives). | Reduce input gain. Slightly reposition the microphone further from your mouth or slightly to the side to minimize plosives. Ensure the windscreen is properly installed. |
| Excessive background noise/feedback | Microphone picking up ambient sound; improper speaker placement. | Ensure the microphone is pointed directly at the sound source and away from speakers. Utilize the cardioid pattern effectively. Adjust monitor speaker placement. |
Especificações técnicas
| Recurso | Detalhe |
|---|---|
| Fator de forma do microfone | Head-worn, microphone only |
| Padrão polar | Unidirecional (Cardióide) |
| Fonte de energia | Phantom Power (+48V required) |
| Tipo de conector | XLR padrão |
| Resposta de frequência | 15 KHz (upper limit, typical range is wider) |
| Sinal-Ruído | 80 dB |
| Peso do item | 0.68 libras (aproximadamente 10.9 onças) |
| Dimensões do produto (C x L x A) | 7.8 x 5.5 x 2.7 polegadas |
| Material | Plástico |
| Cor | Preto |
| Componentes incluídos | C520 Head-Worn Microphone, W44 Windscreen |
| Dispositivos compatíveis | Computador pessoal, Amplifier, Mixing Console (with XLR input and phantom power) |
Informações de garantia e suporte
The AKG C520 Professional Head-Worn Condenser Microphone is covered by a manufacturer's warranty. For detailed information regarding warranty terms, duration, and conditions, please refer to the documentation included with your purchase or visit the official AKG website.
For technical support, service, or further inquiries, please contact AKG customer service through their official webVisite o site ou centros de serviço autorizados. Guarde seu comprovante de compra para acionar a garantia.
Official AKG Website: www.akg.com
