Informações importantes de segurança
Operating power equipment requires adherence to strict safety guidelines to prevent injury. Always read and understand the entire manual before operating the trimmer.
- Use sempre proteção para os olhos e calçado resistente.
- Mantenha os espectadores a uma distância segura.
- Do not operate on wet or slippery surfaces.
- Always turn off the trimmer and allow the engine to cool before refueling.
- Never carry the trimmer with the engine running.
- Always follow the manufacturer's instructions for safe operation.
Produto acimaview
The ECHO GT-225 is a 2-cycle, 21.2cc gas-powered string trimmer designed for efficient lawn and garden maintenance. It features a curved shaft for maneuverability and an easy-to-use design.
Principais características
- 21.2cc professional-grade, 2-stroke engine for reliable power.
- 48-inch curved shaft with flex cable drive for comfortable operation.
- i-30 starting system designed to reduce starting effort by 30%.
- 14.9 fl oz capacity see-through fuel tank for easy fuel level monitoring.
- Equipped with a 2-line Rapid-Loader™ trimmer head for quick line changes.
- Lightweight design at approximately 10 pounds for reduced user fatigue.
- 16-inch cutting swath for efficient trimming.
Figura 1: Completo view of the ECHO GT-225 Curved Shaft Gas Trimmer.
Figure 2: Labeled diagram highlighting key features such as the engine, shaft, fuel tank, and trimmer head.
Figure 3: Close-up of the ergonomic handle and integrated controls, including the throttle and stop switch.
Figura 4: View of the 21.2cc engine and the translucent fuel tank, allowing for easy fuel level checks.
Figure 5: Top-down perspective of the engine, showing the air filter cover and starter mechanism.
Figure 6: Close-up of the trimmer head with the protective guard, designed for user safety and debris deflection.
Configuração e montagem
The ECHO GT-225 may require minor assembly before first use. Follow these steps to prepare your trimmer for operation:
- Desembalagem: Retire cuidadosamente todos os componentes da embalagem. Verifique se todas as peças listadas na lista de embalagem estão presentes.
- Montagem do Manípulo: Attach the auxiliary handle to the shaft at a comfortable operating position. Ensure it is securely tightened.
- Instalação de proteção: Mount the debris shield/guard over the trimmer head according to the instructions. This guard is crucial for operator safety.
- Preparação de Combustível: The GT-225 uses a 2-cycle engine. Mix fresh unleaded gasoline with a high-quality 2-cycle engine oil at the ratio specified in your engine manual (typically 50:1). Do not use E85 fuel.
- Abastecimento: Fill the fuel tank with the prepared fuel mixture. Ensure the fuel cap is securely fastened.
- Fio de corte: Ensure the trimmer head is loaded with the appropriate pre-cut trimmer line. Refer to the maintenance section for detailed line replacement instructions.
Instruções de operação
Starting the Engine (Cold Start)
- Coloque o aparador em uma superfície plana e estável.
- Move the choke lever to the 'COLD START' position.
- Pressione a pera de escorva várias vezes até que o combustível fique visível na linha de retorno.
- Puxe a corda de arranque com firmeza e suavidade até que o motor tente ligar (geralmente de 1 a 2 puxões).
- Once the engine 'coughs' or attempts to start, move the choke lever to the 'RUN' position.
- Pull the starter rope again until the engine starts and runs smoothly.
- Deixe o motor aquecer por alguns instantes antes de acionar o acelerador.
Usando o Trimmer
- Segure o aparador firmemente com ambas as mãos, mantendo uma postura equilibrada.
- Keep the trimmer head parallel to the ground for an even cut.
- Maintain a safe distance from objects, people, and animals.
- Avoid hitting hard surfaces, rocks, or metal objects with the trimmer line, as this can cause line breakage and potential damage.
- To feed more line, gently tap the trimmer head on the ground while the engine is running at full throttle. The Rapid-Loader™ head will automatically advance the line.
Parando o motor
- Solte o gatilho do acelerador.
- Press the engine stop switch to the 'OFF' position.
Manutenção
Regular maintenance ensures optimal performance and extends the life of your ECHO GT-225 trimmer.
Combustível e óleo
- Always use fresh, properly mixed 2-cycle fuel. Stale fuel can cause starting issues and engine damage.
- Armazene o combustível em um recipiente aprovado, em local fresco e seco.
Substituição da linha de corte do aparador
The GT-225 uses a Rapid-Loader™ head designed for pre-cut line segments. This system simplifies line replacement compared to traditional spool winding.
- Certifique-se de que o motor esteja desligado e frio.
- Locate the two holes on the trimmer head where the line exits.
- Pull out any remaining short pieces of trimmer line.
- Insert new pre-cut line segments (typically 9-10 inches long) into the holes until they are securely seated.
- Use high-quality trimmer line for best performance and durability.
Limpeza
- After each use, clean debris from the trimmer head, guard, and engine cooling fins.
- Periodically clean or replace the air filter to ensure proper engine breathing.
Armazenar
- Para armazenamento prolongado, esvazie o tanque de combustível e ligue o motor até que ele pare para limpar o carburador.
- Store the trimmer in a clean, dry place, away from direct sunlight and extreme temperatures.
Solução de problemas
This section provides solutions to common operational issues. For problems not listed here, consult an authorized service center.
| Problema | Possível causa | Solução |
|---|---|---|
| O motor não liga. | No fuel, stale fuel, incorrect choke setting, fouled spark plug, clogged fuel filter. | Check fuel level and freshness. Ensure choke is set correctly. Clean/replace spark plug. Check/replace fuel filter. |
| O motor funciona mal ou para de funcionar. | Incorrect fuel mixture, clogged air filter, dirty carburetor, spark plug issue. | Verify fuel mixture. Clean air filter. Clean carburetor (professional service recommended). Inspect spark plug. |
| Linha de corte não alimenta | Line too short, incorrect line installation, debris in head. | Replace with new pre-cut line segments. Ensure line is properly inserted. Clear any debris from the trimmer head. |
| Vibração excessiva | Cabeçote de corte danificado, eixo torto, componentes soltos. | Inspect trimmer head for damage. Check all fasteners for tightness. If shaft is bent, seek professional service. |
Especificações técnicas
| Recurso | Especificação |
|---|---|
| Marca | ECO |
| Número do modelo | GT-225 |
| Fonte de energia | Alimentado a gasolina |
| Deslocamento do motor | 21.2cc |
| Tipo de motor | 2-Ciclo |
| Peso do item | 10 libras |
| Largura de corte | 16 inches (Note: '1700 Inches' from source is likely an error and corrected to 16 inches based on common trimmer specs and labeled image) |
| Dimensões do produto | 15.13"L x 12.36"W (Engine/Head dimensions, overall length not specified but shaft is 48") |
| Velocidade | 7500 RPM |
| Montagem necessária | Sim |
| UPC | 743184994719 |
Garantia e Suporte
For specific warranty details, please refer to the warranty card included with your product or visit the official ECHO webGuarde o comprovante de compra como prova para eventuais solicitações de garantia.
If you require technical assistance, replacement parts, or service, please contact ECHO customer support or an authorized ECHO service dealer. Contact information can typically be found on the ECHO website ou na documentação do produto.
