1. Produto acabadoview
The Sunlite T9 Round Fluorescent Circline Lamp is an energy-efficient lighting solution designed for various indoor applications. This 22-watt lamp provides 1250 lumens of 4100K cool white light, offering bright and consistent illumination. It features a G10Q 4-pin base for straightforward installation and boasts a long lifespan of 10,000 hours. The lamp is RoHS compliant, ensuring environmental friendliness.
Figura 1.1: Sunlite FC8T9/CW 8-Inch T9 Round Fluorescent Circline Lamp.
Figura 1.2: Key features and benefits of the Sunlite FC8T9/CW lamp.
2. Informações de segurança
AVISO: This product can expose you to chemicals that are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.
- Always disconnect power to the fixture before installing or replacing the lamp.
- Garantir o lamp is cool before handling.
- Do not use in wet locations unless the fixture is specifically designed for such environments.
- Handle fluorescent lamps with care to prevent breakage.
- Descarte l usadoamps according to local regulations, as they may contain mercury.
3. Configuração e instalação
Este euamp is designed for easy installation in compatible fixtures with a G10Q 4-pin base.
Etapas de instalação:
- Desligue a energia: Before beginning installation, ensure the power supply to the light fixture is completely turned off at the circuit breaker.
- Remover L antigoamp (se aplicável): Carefully remove the existing circline fluorescent lamp from its fixture. Note how it is connected to the G10Q 4-pin base.
- Identify Base: Locate the G10Q 4-pin base on your fixture. The Sunlite FC8T9/CW lamp has a matching 4-pin connector.
- Inserir novo Lamp: Align the 4 pins of the new Sunlite FC8T9/CW lamp with the corresponding slots in the G10Q base. Gently push the lamp into the base until it is securely seated. Do not force the lamp.
- Seguro Lamp: Garantir o lamp is properly seated and any retaining clips or mechanisms in your fixture are engaged to hold the lamp no lugar.
- Restaurar energia: Uma vez que euamp Se estiver instalado corretamente, restabeleça a energia da luminária no disjuntor.
- Teste: Ligue o interruptor de luz para confirmar o lamp está funcionando corretamente.
Figura 3.1: Lamp dimensions and G10Q 4-Pin Base detail.
4. Instruções de operação
The Sunlite FC8T9/CW lamp operates immediately upon receiving power from a compatible fixture. It is designed for indoor use in circline fixtures, hallways, kitchens, and other residential or commercial indoor lighting applications.
- Saída de luz: Provides 1250 lumens of bright, consistent illumination.
- Temperatura de cor: Emits 4100 Kelvin (Cool White) light, suitable for creating a neutral and bright ambiance.
- Eficiência Energética: Consumes only 22 watts, offering an energy-efficient lighting solution.
Figura 4.1: Understanding light color temperature, with 4100K as Cool White.
5. Manutenção
The Sunlite FC8T9/CW lamp requires minimal maintenance due to its long lifespan.
- Limpeza: Periodicamente, com a energia desligada e o lamp Deixe esfriar e limpe suavemente oamp surface with a soft, dry cloth to remove dust and debris. Do not use liquid cleaners directly on the lamp.
- Substituição: Substitua o lamp when it reaches the end of its operational life (approximately 10,000 hours) or if it shows signs of flickering or dimming. Follow the installation steps for replacement.
6. Solução De Problemas
If your Sunlite FC8T9/CW lamp is not functioning as expected, consider the following:
- Lamp Não liga:
- Ensure the power supply to the fixture is on at both the wall switch and the circuit breaker.
- Verifique se o lamp is securely seated in its G10Q 4-pin base. Remove and re-insert if necessary.
- Inspecione o lamp for any visible damage or breakage. A broken lamp não irá operar.
- If the fixture uses a ballast, ensure the ballast is functioning correctly. A faulty ballast can prevent the lamp da iluminação.
- Cintilação ou escurecimento:
- Flickering can indicate the lamp is nearing the end of its lifespan and may need replacement.
- Garantir o lamp is fully seated in the base. Loose connections can cause flickering.
- A failing ballast can also cause flickering or dimming.
- Ruído incomum:
- A humming noise often indicates a problem with the fixture's ballast. Consult a qualified electrician if this persists.
If these steps do not resolve the issue, consider replacing the lamp or consulting a qualified electrician for fixture inspection.
7. Especificações
| Recurso | Especificação |
|---|---|
| Marca | Luz do sol |
| Nome do modelo | Sunlite 05015 |
| Número do modelo | FC8T9/CW |
| Tipo de luz | Fluorescente |
| O quetage | 22 Watts |
| Brilho | 1250 Lúmens |
| Temperatura de cor | 4100 Kelvin (branco frio) |
| Tipo de base | G10Q 4-Pin |
| Vida média | 10,000 horas |
| Dimensões do produto | 1.13"L x 8"A |
| Material | Vidro, metal, plástico |
| Características especiais | Energy Efficient, RoHS Compliant, Easy To Install |
| Uso interno/externo | Interior |
| Volumetage | 120 Volts |
| Peso do item | 6.4 onças |
8. Garantia e Suporte
Informações sobre garantia: For details regarding the product warranty, please refer to the packaging of your Sunlite FC8T9/CW lamp.
Suporte ao cliente: For further assistance or inquiries, please visit the official Sunlite store or contact their customer service. You can find more information at the Sunlite Brand Store.
