Oasis PGACSL

Manual do Usuário do Bebedouro Universal Não Refrigerado Oasis PGACSL VersaCooler II de Dois Níveis

Model: PGACSL

Introdução

This manual provides essential information for the proper installation, operation, and maintenance of your Oasis PGACSL VersaCooler II Bi-Level Universal Non-Refrigerated Drinking Fountain. Please read these instructions thoroughly before installation and use to ensure safe and efficient operation. Retain this manual for future reference.

Informações de segurança

Observe all local plumbing and electrical codes during installation. This unit is designed for non-refrigerated water dispensing. Ensure proper water supply connections and drainage. Do not use abrasive cleaners or solvents on the unit's surfaces. Always disconnect water supply before performing any maintenance.

Conteúdo da embalagem

Verifique se todos os componentes estão presentes antes de iniciar a instalação:

  • Oasis PGACSL VersaCooler II Bi-Level Drinking Fountain Unit
  • Acessórios de instalação (fornecidos pelo fabricante)
  • Manual do usuário (este documento)

Configuração e instalação

The Oasis PGACSL VersaCooler II is a freestanding, bi-level drinking fountain designed for universal access, including ADA compliance. It requires a direct connection to a potable water supply and a drainage system. No electrical power source is required for this non-refrigerated model.

Etapas de instalação:

  1. Seleção do Site: Choose a stable, level location with access to a cold water line and a drain. Ensure adequate space around the unit for maintenance and user access.
  2. Desembalagem: Retire cuidadosamente a unidade da embalagem. Inspecione-a para verificar se há danos causados ​​pelo transporte.
  3. Conexão de abastecimento de água: Connect the potable water supply line to the inlet connection located at the bottom access point of the unit. Use appropriate plumbing fittings and ensure all connections are watertight.
  4. Conexão de drenagem: Connect the unit's drain outlet to a suitable waste drain. Ensure proper slope for effective drainage and prevent standing water.
  5. Verificação de vazamento: Slowly turn on the water supply and check all connections for leaks. Address any leaks immediately.
  6. Sistema de descarga: Activate the bubblers for a few minutes to flush any air or debris from the water lines.
Oasis PGACSL VersaCooler II Bi-Level Universal Non-Refrigerated Drinking Fountain in Sandstone color.

This image displays two Oasis PGACSL VersaCooler II Bi-Level Universal Non-Refrigerated Drinking Fountains. Each unit features a sandstone-colored base and a silver-grey basin with a bubbler and push-button activation. The bi-level design accommodates users of different heights, adhering to ADA standards. The units are freestanding and designed for non-refrigerated water dispensing.

Instruções de operação

The Oasis PGACSL drinking fountain is simple to operate:

  • Ativação de água: Press the push-button actuator located on the front of the basin. Water will flow from the bubbler.
  • Fluxo de água: Solte o botão para interromper o fluxo de água.
  • Bi-Level Design: The unit features two basins at different heights to accommodate various users, including those with disabilities, in compliance with ADA guidelines.

Manutenção

Regular maintenance ensures optimal performance and hygiene of your drinking fountain.

Limpeza:

  • Superfícies externas: Clean the exterior surfaces, including the basin and sandstone finish, regularly with a mild soap and water solution. Wipe dry with a soft cloth.
  • Borbulhador: Periodically clean the bubbler head to remove any mineral deposits or debris. A small brush can be used if necessary.
  • Drenar: Ensure the drain is clear of obstructions to prevent water accumulation.

Inspeção:

  • Regularly inspect all water connections for leaks.
  • Check the push-button actuators for smooth operation.
  • Ensure the unit remains stable and level.

Solução de problemas

ProblemaPossível causaSolução
Sem fluxo de águaWater supply turned off; clogged bubbler; kinked water line.Check water supply valve; clean bubbler; inspect water lines.
Baixa pressão da águaPartially closed water supply valve; clogged bubbler; low building water pressure.Fully open water supply valve; clean bubbler; consult building maintenance.
Vazamentos de águaConexões hidráulicas soltas; vedações danificadas.Tighten connections; replace seals if damaged (professional assistance recommended).
Drenagem lentaCano de esgoto entupido.Clear drain line of obstructions.

Especificações

  • Modelo: PGACSL
  • Marca: Oásis
  • Tipo: Bi-Level Universal Non-Refrigerated Drinking Fountain
  • Tipo de instalação: Freestanding
  • Material: Pedra
  • Cor: Arenito
  • Fonte de energia: No Power Source (Non-Refrigerated)
  • Localização de acesso: Fundo
  • Dimensões do produto: 19.5 x 39.5 x 38.5 polegada (Largura x Profundidade x Altura)
  • Peso do item: 35.8 libras
  • Características especiais: Water Flowing, ADA Compliant Design
  • Código UPC: 092026168888

Garantia e Suporte

For warranty information and technical support, please refer to the documentation provided at the time of purchase or contact Oasis customer service directly. Keep your purchase receipt as proof of purchase.

Oasis Customer Service: Please visit the official Oasis website or refer to your product packaging for current contact information.

Documentos relacionados - PGACSL

Préview Guia de instalação e manutenção do Oasis Versacooler II PGVD8AC PGVDAC
Instruções completas de instalação, manutenção e operação para os bebedouros Oasis Versacooler II PGVD8AC e PGVDAC para ambientes internos/externos. Inclui avisos de segurança e dicas de solução de problemas.
Préview Especificações técnicas do bebedouro OASIS M8CREBF Bi-Level Radii e do enchedor eletrônico modular de garrafas Aquapointe.
Especificações técnicas completas para o bebedouro refrigerado de dois níveis OASIS M8CREBF e o enchedor eletrônico modular de garrafas Aquapointe. Os detalhes incluem desempenho, recursos como a tecnologia antimicrobiana Freshield, orientações de instalação, informações sobre garantia e certificações.
Préview Modelos OASIS VERSACOOLER II: Instruções de Instalação e Manutenção
Instruções completas de instalação e manutenção para bebedouros e fontes de água OASIS VERSACOOLER II, incluindo os modelos PG8ACSL, PGV8ACSL, PGF8ACSL, PGVF8ACSL e a série SUNROC ADA. Abrange inspeção, configuração, manutenção e descontinuação de uso.
Préview Oasis Aquapointe MWEBEnchedora eletrônica de garrafas F - Especificações e recursos
Especificações detalhadas, características, acessórios e instruções de instalação para o Oasis Aquapointe MWEBEnchedora eletrônica modular de garrafas, sem necessidade de refrigeração. Inclui informações sobre conformidade e detalhes da garantia.
Préview Kit de adaptação mecânica para estação de enchimento de garrafas OASIS PWFSBF-FVF VersaFiller - Especificações técnicas
Especificações técnicas detalhadas do kit de retrofit mecânico para estação de enchimento de garrafas OASIS PWFSBF-FVF VersaFiller. Saiba mais sobre seus recursos, instalação, certificações, garantia e acessórios para modernizar os modelos OASIS PG8AC e P8AM existentes.
Préview Oasis Aqua Temp Module User Manual: Installation, Setup, and Operation Guide
This user manual provides comprehensive instructions for installing, setting up, and operating the Oasis Aqua Temp Module, an optional smart upgrade for Oasis heat pumps. It covers app pairing for iOS and Android, temperature control, timer settings, troubleshooting, and warranty information.