Manual de Instruções do Suporte de Iluminação Básico ProMaster LS1(N) (Modelo 9245)

Introdução

The ProMaster LS1(N) light stand is a basic, lightweight stand designed for supporting smaller studio lights, LED panels, or camera-mounted flashes. This manual provides essential information for its safe and effective use.

Principais características

• Design leve e portátil.
• Adjustable height for versatile lighting setups.
• Standard 1/4-inch screw mount for broad compatibility with various lighting equipment.
• Durable aluminum alloy construction.
• Stable tripod base.

Instruções de configuração

Follow these steps to correctly set up your ProMaster LS1(N) Basic Light Stand:

1. Unpack the light stand from its carrying bag.
2. Coloque o suporte em uma superfície plana e estável.
3. Abra cuidadosamente as pernas do tripé até que estejam totalmente estendidas e estáveis.
4. Loosen the locking knobs on each section of the central column.
5. Extend the central column to the desired height.
6. Tighten all locking knobs securely to prevent slippage.
7. Attach your lighting equipment to the 1/4-inch screw mount at the top of the stand. Ensure it is securely fastened.

Figure 1: The ProMaster LS1(N) light stand shown fully extended with its tripod legs spread for stability.

Instruções de operação

The ProMaster LS1(N) light stand offers simple adjustments for optimal lighting.

Ajustando a altura

1. To adjust the height, loosen the locking knobs on the central column sections.
2. Carefully raise or lower the sections to achieve the desired height.
3. Always re-tighten all locking knobs firmly after adjustment to ensure stability.

Anexando acessórios

The top of the stand features a universal 1/4-inch screw mount.

1. Screw your light, camera, or other compatible accessory onto this mount.
2. Ensure the accessory is tightened securely to prevent accidental detachment.

Figura 2: Um close-up view of the ProMaster LS1(N) light stand's top mount with a studio light attached, demonstrating its compatibility.

Cuidados e Manutenção

• Regularly inspect all locking mechanisms and screws for tightness.
• Limpe o suporte com um pano macio e seco. Evite produtos de limpeza abrasivos ou solventes.
• Store the stand in its carrying bag in a dry, cool place when not in use to protect it from dust and damage.
• Do not overload the stand beyond its recommended weight capacity.

Solução de problemas

Instabilidade da posição em pé

• Ensure all tripod legs are fully extended and evenly spread.
• Verify that all locking knobs are securely tightened.
• If using heavy equipment, consider adding sandbags to the base for increased stability.

Dificuldade em ajustar a altura

• Check that all locking knobs are sufficiently loosened before attempting to adjust the height.
• Ensure no debris is obstructing the telescoping sections.

Especificações do produto

Garantia e Suporte

For warranty information or technical support regarding your ProMaster LS1(N) Basic Light Stand, please refer to the official ProMaster website or contact their customer service directly. Keep your purchase receipt for proof of purchase.