Introdução
The BEA 10EAGLE Pedestrian Motion Detector is designed for use with automatic doors, providing sophisticated motion tracking and precise activation zones. This device offers enhanced energy conservation features and multiple motion detection options to suit various operational requirements. This manual provides essential information for the proper installation, operation, and maintenance of your 10EAGLE motion detector.
Informações de segurança
Please read all instructions carefully before installation and operation. Failure to follow these instructions may result in injury or damage to the device. Keep this manual for future reference.
- Certifique-se de que a energia esteja desligada antes de realizar qualquer instalação, fiação ou manutenção.
- A instalação deve ser realizada por pessoal qualificado, de acordo com as normas e regulamentos elétricos locais.
- Não exponha o dispositivo à umidade excessiva ou temperaturas extremas.
- Use only specified power sources and wiring as detailed in the wiring instructions.
- Verify proper operation after installation and before regular use.
Configuração e instalação
The BEA 10EAGLE is designed for wall mount installation. Proper setup is crucial for optimal performance and safety.
Figura 1: Frente view of the BEA 10EAGLE Pedestrian Motion Detector. This image shows the compact, black housing with a red indicator light.
Montagem
The device is designed for wall mounting. Select a location that provides an unobstructed view of the detection area for automatic doors. Ensure the mounting surface is stable and capable of supporting the device's weight.
Fiação
The 10EAGLE operates on a corded electric power source. Wiring connections are specific and may differ from other sensors. It is imperative to consult the detailed wiring instructions provided with the product packaging for correct connections. Incorrect wiring can lead to malfunction or damage. Pay close attention to the terminals for power input and signal output to the automatic door system.
Configuração e Ajuste
The 10EAGLE features extra immunity protection and allows for precise activation zone adjustments. Refer to the product's specific configuration guide for details on setting detection parameters, including sensitivity and detection field size. This ensures the sensor accurately detects pedestrians while minimizing false triggers.
Instruções de operação
The BEA 10EAGLE utilizes sophisticated motion tracking to detect pedestrian movement for automatic door activation. It can detect speeds as low as 2.2 inches per second, ensuring reliable operation even for slow-moving individuals.
Motion Detection Options
The device offers three primary motion detection options:
- Bidirecional: Detects movement in both directions (approaching and departing) within the detection zone.
- Uni-directional: Configured to detect movement in a single direction, typically for entry or exit only.
- Uni-MTF (Motion Tracking Feature): A specialized uni-directional mode that enhances energy conservation by optimizing detection based on the direction of travel.
The selected detection option should align with the specific traffic flow requirements of the automatic door system. Refer to the product's advanced settings guide for instructions on switching between these modes.
Manutenção
Regular maintenance ensures the longevity and reliable performance of your BEA 10EAGLE motion detector.
- Limpeza: Periodically clean the sensor's lens and housing with a soft, dry cloth. Avoid abrasive cleaners or solvents that could damage the surface.
- Inspeção: Annually inspect the wiring connections for any signs of wear, corrosion, or looseness. Ensure the mounting is secure.
- Teste de funcionalidade: Regularly test the sensor's detection capabilities by walking through its activation zone to ensure the automatic door responds correctly.
If any issues are observed during maintenance, refer to the Troubleshooting section or contact support.
Solução de problemas
This section addresses common issues you might encounter with the BEA 10EAGLE motion detector.
| Problema | Possível causa | Solução |
|---|---|---|
| Door does not activate when approached. |
|
|
| Door activates without presence of a person (false trigger). |
|
|
| Sensor indicator light is off or blinking abnormally. |
|
|
For issues not covered here, or if troubleshooting steps do not resolve the problem, please contact BEA Incorporated technical support.
Especificações
| Recurso | Detalhe |
|---|---|
| Marca | BeA |
| Número do modelo | 10EAGLE |
| Cor | Preto |
| Fonte de energia | Elétrico com fio |
| Tipo de montagem | Montagem na parede |
| Peso do item | 0.01 onças |
| Dimensões da embalagem | 6.14 x 4.45 x 3.35 polegadas |
| Usos recomendados | Walkway, Automatic Doors |
| Velocidade de detecção | As low as 2.2 inches per second |
| Motion Detection Options | Bi-directional, Uni-directional, Uni-MTF |
Garantia e Suporte
For information regarding product warranty, please refer to the documentation included with your purchase or visit the official BEA Incorporated website. For technical assistance, troubleshooting beyond this manual, or replacement parts, please contact BEA Incorporated customer support directly.
Fabricante: BEA Incorporated
