1. Introdução
This manual provides essential information for the safe and efficient operation of your RCF NX10-SMA 10-inch 2-Way Coaxial Monitor. Please read this manual thoroughly before using the product to ensure proper setup, operation, and maintenance. Retain this manual for future reference.
Figura 1: Frente view of the RCF NX10-SMA coaxial monitor, showcasingraças à sua grade de proteção e design compacto.
2. Informações de segurança
Observe sempre as seguintes precauções de segurança para evitar choque elétrico, incêndio ou ferimentos:
- Fonte de energia: Conecte a unidade somente à fonte de alimentação especificada.tage. Certifique-se de que o cabo de alimentação não esteja danificado e esteja devidamente aterrado.
- Ventilação: Não obstrua as aberturas de ventilação. Garanta uma circulação de ar adequada ao redor do aparelho para evitar o superaquecimento.
- Umidade: Do not expose the unit to rain or moisture. Avoid placing liquids on or near the unit.
- Manutenção: Não tente consertar este produto sozinho. Encaminhe todos os serviços de manutenção para pessoal de serviço qualificado.
- Colocação: Ensure the unit is placed on a stable surface or securely mounted to prevent it from falling.
- Proteção auditiva: Prolonged exposure to high sound pressure levels can cause permanent hearing damage. Use appropriate hearing protection when operating the unit at high volumes.
3. Configuração
3.1 Desembalagem
Carefully remove the RCF NX10-SMA monitor from its packaging. Inspect the unit for any signs of damage that may have occurred during transit. If damage is found, contact your dealer immediately.
3.2 Colocação Física
The NX10-SMA is designed for versatile placement, commonly used as a stage monitor. Its angled cabinet allows for optimal sound projection towards the performer. Ensure the monitor is placed on a stable, flat surface or securely mounted.
Figura 2: Lateral view of the RCF NX10-SMA monitor, illustrating its angled profile adequado para Stage monitoramento.
3.3 Conexões
Refer to the rear panel for all input and output connections. Ensure all connections are secure before powering on the unit.
- Entrada CA: Connect the provided power cable to the AC INPUT socket.
- AC Link: Use the AC LINK output to daisy-chain power to other compatible RCF units. Do not exceed the maximum current rating.
- Entrada: Connect your audio source (e.g., mixer, instrument) to the INPUT XLR connector.
- Link: Use the LINK XLR output to send the audio signal to another NX10-SMA unit or other audio equipment.
Figure 3: Rear panel of the RCF NX10-SMA, detailing the AC input/link, audio input/link, and control knobs.
4. Operação
4.1 Ligar/Desligar
After all connections are made, switch the power button located on the rear panel to the 'ON' position. To power off, switch the button to 'OFF'. It is recommended to power on your monitors last and power them off first in your audio chain.
4.2 Controle de volume
Adjust the 'VOLUME' knob on the rear panel to set the desired output level. Start with the volume at a low setting and gradually increase it to prevent sudden loud sounds.
4.3 Input Sensitivity/EQ Presets
The NX10-SMA may feature controls for input sensitivity or EQ presets (e.g., 'STAGE', 'MAIN', 'BOOST'). Consult the labels on the rear panel (refer to Figure 3) and adjust these settings according to your application and desired sound profile.
5. Manutenção
5.1 Limpeza
Clean the exterior of the unit with a soft, dry cloth. Do not use abrasive cleaners, solvents, or waxes. Ensure no liquids enter the unit.
5.2 Armazenamento
When not in use, store the RCF NX10-SMA in a dry, dust-free environment, away from extreme temperatures. If transporting, use appropriate protective cases.
5.3 Cuidados Gerais
Regularly check cables for wear and tear. Avoid dropping or subjecting the unit to strong impacts.
6. Solução De Problemas
If you encounter issues with your RCF NX10-SMA, refer to the following common problems and solutions:
- Sem som:
- Ensure the unit is powered on and the power cable is securely connected.
- Check that the audio source is active and connected correctly to the INPUT.
- Verify the 'VOLUME' knob is not set to minimum.
- Test with a different audio cable.
- Som distorcido:
- Reduce the input level from your audio source.
- Lower the 'VOLUME' knob on the monitor.
- Verifique se há cabos danificados.
- Unidade não liga:
- Ensure the power cable is fully inserted into both the unit and the power outlet.
- Teste a tomada elétrica com outro aparelho.
- Verifique se o interruptor de alimentação está na posição 'LIGADO'.
If the problem persists after attempting these solutions, contact RCF customer support or a qualified service technician.
7. Especificações
The following table outlines the key specifications for the RCF NX10-SMA 10-inch 2-Way Coaxial Monitor:
| Recurso | Especificação |
|---|---|
| Fabricante | RCF |
| Número do modelo | NX10-SMA |
| Dimensões do produto | 20 x 19.7 x 15.9 polegadas |
| Peso do item | 38.8 libras |
| Tipo de montagem | Wall Mount (Note: Requires compatible mounting hardware, sold separately) |
| Contagem de unidades | 1.0 contagem |
| É à prova d'água | FALSO |
8. Informações de garantia
For detailed warranty information, please refer to the warranty card included with your product or visit the official RCF webOs termos e condições da garantia podem variar conforme a região e o revendedor.
9. Suporte ao cliente
If you require technical assistance, have questions about your RCF NX10-SMA, or need to report a service issue, please contact RCF customer support or your authorized RCF dealer. Contact information can typically be found on the RCF official website ou na documentação do produto.
