1. Introdução
This instruction manual provides essential information for the proper installation, maintenance, and troubleshooting of the Candy 92130871 washing machine replacement belt. Please read this manual thoroughly before attempting any installation or repair to ensure safe and effective operation.
2. Informações de segurança
- Always disconnect the washing machine from the power supply before attempting any installation, maintenance, or repair work. Failure to do so can result in electric shock or serious injury.
- Use equipamento de proteção individual adequado, como luvas, para evitar lesões.
- Se tiver dúvidas sobre qualquer etapa, consulte um técnico qualificado.
- Keep children and pets away from the appliance during repair.
- Certifique-se de que todas as ferramentas estejam em boas condições e sejam usadas corretamente.
3. Produto acabadoview
The Candy 92130871 is an authentic replacement drive belt designed for various Candy washing machine models. This belt is crucial for transmitting power from the motor to the drum, enabling the washing machine to operate correctly.
Image 1: The Candy 92130871 washing machine replacement belt. This image shows the black rubber belt, typically ribbed on one side for grip.
4. Compatibilidade
This replacement belt (Manufacturer Code: 92130871) is compatible with a wide range of Candy washing machine models. Please verify your washing machine's model number against the list below to ensure proper fitment.
Compatible Models include:
- CANDY AC16, ACTIVA50, ACTIVA51, ACTIVA60, ACTIVA61, ACTIVA64SLIM, ACTIVA66SL, ACTIVA6CI
- ALISE060, ALISE065, ALISE066, ALISE'160XT, ALISE190X, ALISE6190X0, ALISE'.610B, ALISE'65 ARG, ALISE'650, ALISE'696
- AQUAV.6, AQUAVIVA60, AQUAVIVA63, AQUAVIVA650, AQUAVIVA66
- C36ZXT, C532, C535T, C536T, C55XT (I), C564XT plata, C577T, C588XT, C58XT (I), C6077T, XT AQUAM, CM.608XT (I)
- C616XT (I), C625XT, C634XT, C634XT (CE), C634XT (NORD), C636XT, C647XT (I), C657XT (I)
- CB52T, CB52TCKD, CB53XTR, CB612XT, CB613TR, CB623XTTR HC, CB62T, CB62TR, CB633XTR, CB634XT, CB63TES, CB63TR, CB63TRCKD, CB63XTR
- CE520T, CE530, CE615, CE621T, CE623R, CE625TR, CE629T, CE637XT, CE650TR
- CG5444T, CG5544T, CG623T, CG644.3T, CG644T, CG654XT, CGAQ665XT
- CH630, CHIARA51XT, CHIARA540XTR, CHIARA552TR, CHIARA55XTR, CHIARA5XT, CHIARA5XTV, CHIARA642XTR, CHIARA65XTR, CHIARA65XT, CHIARA65XTV, CHIARA65XTR, CHIARA65X2XTR, CHIARA6XT
- CI50XTR, CI537T, CI57TR, CI589XT, CI60XTR, CI60XTR H/C, CI620TP, CI622T, CI624T, CI626XT, CI627T, CI637T, CI648XT, CI658XT
- CJ6514, CJ543T, CJ613XT, CJ643T, CJA52T
- CL66XT, CN50T, CN50T-04S, CN60T, CN63T, CN63T CI, CN63TCKD, CN63TRU-03S
- IPC 610, CR61, CS47XT (I), CSB640XTR, CSE640XTR, CSE615XT, CM.SE635XT, CSG624T, CSI615T, CSI635XTR, CSI635XTRSY, CSN62T, CSN62T-03S
- EXCL.S641XTR, EXCLUS.60, EXCLUS.6000, EXCLUS540XTR, EXCLUS65XTR
- HOL165XTR, HOL62, VACANZAS 6, HOLIDAY161, HOLIDAY60, HOLIDAY603, HOLIDAY61
- ICL60T, LADYC.623CKD, SEL.S643XTR, SELEC 0.631 XTR, SELECTA600, SELECTA60X, SELECTA61XXTR
- SL5000EXC, SL50EXCLUS., SLIM644AQUAV, SLIMMY508XT, SLIMMY634XT, SLIMMY655XT, SLIMMY6AQUAV, SLIMMYCB62XT, WM601.
5. Instalação (Configuração)
Replacing a washing machine drive belt requires careful attention. Follow these general steps. Specific machine designs may vary, so refer to your washing machine's primary service manual if available.
- Preparação:
- Disconnect the washing machine from the main power supply.
- Desligue o abastecimento de água da máquina.
- Pull the washing machine away from the wall to access the rear panel.
- Acesse o cinto:
- Locate and remove the screws securing the rear access panel of the washing machine.
- Carefully remove the panel to expose the motor, drum pulley, and the old belt (if still present).
- Remova a correia antiga:
- If the old belt is still partially attached, carefully pry it off the motor pulley and then the larger drum pulley. Note its orientation.
- Instale a nova correia:
- First, loop the new Candy 92130871 belt around the smaller motor pulley.
- Next, partially loop the belt around the larger drum pulley.
- While holding the belt firmly on the motor pulley and partially on the drum pulley, slowly rotate the drum pulley by hand. The belt should gradually roll onto the drum pulley until it is fully seated. Ensure the ribbed side of the belt (if applicable) faces the pulleys correctly.
- Check that the belt is centered on both pulleys and has proper tension. It should be snug but allow for a small amount of flex.
- Remontar:
- Replace the rear access panel and secure it with the screws.
- Push the washing machine back into its position.
- Reconnect the power supply and water supply.
- Teste:
- Run a short, empty wash cycle to ensure the belt operates smoothly and quietly.
6. Manutenção
Regular inspection of the drive belt can help prevent future issues and extend the life of your washing machine.
- Inspeção periódica: Every 1-2 years, or if you notice unusual noises or performance issues, inspect the belt for signs of wear, cracking, fraying, or stretching.
- Tensão adequada: Ensure the belt maintains proper tension. A loose belt can slip, causing the drum to not spin or spin intermittently. An overly tight belt can put undue stress on the motor and drum bearings.
- Limpeza: Keep the area around the motor and pulleys free from lint, debris, and moisture, which can affect belt performance and lifespan.
7. Solução De Problemas
| Problema | Possível causa | Solução |
|---|---|---|
| Drum not spinning or spinning slowly | Broken, stretched, or slipped drive belt. | Inspect the belt. Replace if broken or severely worn. Re-seat if slipped. |
| Loud squealing or grinding noise during spin cycle | Worn or misaligned drive belt. | Check belt for wear and proper alignment on pulleys. Replace if worn. |
| Cheiro de queimado | Belt slipping due to improper tension or excessive load. | Check belt tension and ensure it's not overloaded. Replace if damaged from slipping. |
If troubleshooting steps do not resolve the issue, it is recommended to contact a qualified appliance technician.
8. Especificações
- Marca: Doce
- Número do modelo: 92130871
- Tipo de produto: Washing Machine Replacement Belt
- Dispositivos compatíveis: Máquina de lavar
- Dimensões da embalagem: 30 x 20 x 3 cm (aproximadamente)
- Peso do produto: 100g (aproximadamente)
9. Garantia e Suporte
For information regarding warranty coverage, technical support, or to purchase additional parts, please refer to the official Candy webou entre em contato com o departamento de atendimento ao cliente. Guarde o comprovante de compra como prova de aquisição.
Official Candy Website: www.candy-group.com
