Introdução
This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your Lexmark MS810n Monochrome Laser Printer. Designed for efficiency and reliability, this printer offers high-speed monochrome printing with advanced features for professional environments.
The Lexmark MS810n is equipped with 256 MB of upgradable memory and a fast dual-core processor, ensuring effortless printing of documents with graphics and images. Its network-ready capabilities make it suitable for various office setups.
Produto acimaview
Figura 1: Frente view of the Lexmark MS810n Monochrome Laser Printer, showcasingraças ao seu design compacto e painel de controle.
The Lexmark MS810n is a robust monochrome laser printer designed for high-volume printing. Key components include the paper input tray, output bin, control panel with LCD display, and various connectivity ports.
Principais características:
- High-speed monochrome printing up to 55 pages per minute (ppm).
- Network-ready with Gigabit Ethernet connectivity.
- 800 MHz dual-core processor and upgradable memory for efficient processing.
- Maximum input capacity of up to 4400 sheets with optional trays.
- High-yield toner cartridges for reduced maintenance.
- Intuitive LCD display for easy navigation and control.
Guia de configuração
1. Desembalando a impressora
- Retire cuidadosamente a impressora da embalagem.
- Remove all packing materials, tapes, and protective films from the exterior and interior of the printer.
- Place the printer on a stable, flat surface with adequate ventilation.
2. Installing the Toner Cartridge and Imaging Unit
The Lexmark MS810n requires both a toner cartridge and an imaging unit for operation. Ensure both are correctly installed.
Figure 2: Opening the top cover of the printer to access the toner cartridge and imaging unit bay, indicated by a green tab.
- Open the front access door or top cover of the printer.
- Insert the imaging unit into its designated slot until it clicks into place.
- Unpack the toner cartridge and gently shake it to distribute the toner.
- Insert the toner cartridge into the imaging unit until it locks securely.
- Feche a tampa da impressora.
3. Carregando papel
- Pull out the paper tray until it stops.
- Ajuste as guias de papel para que correspondam ao tamanho do papel que você está carregando.
- Load the paper stack into the tray, ensuring it is flat and not exceeding the maximum fill line.
- Empurre cuidadosamente a bandeja de papel de volta para dentro da impressora.
4. Conectando a impressora
The MS810n supports Ethernet connectivity for network printing.
- Connect one end of an Ethernet cable to the printer's Ethernet port.
- Connect the other end of the Ethernet cable to an active network port or router.
- Conecte o cabo de alimentação à impressora e, em seguida, a uma tomada elétrica aterrada.
- Pressione o botão liga/desliga para ligar a impressora.
5. Instalação do driver
For optimal performance, install the latest printer drivers from the Lexmark official website. The printer is network-ready, allowing for easy integration into existing network infrastructures.
Instruções de operação
Imprimindo Documentos
- Ensure the printer is powered on and connected to the network.
- No seu computador, abra o documento que deseja imprimir.
- Selecione "Imprimir" no menu do aplicativo (por exemplo, File > Imprimir).
- Choose "Lexmark MS810n" from the list of available printers.
- Adjust print settings as needed (e.g., number of copies, paper source, print quality).
- Clique em "Imprimir" para enviar o trabalho para a impressora.
Usando o Painel de Controle
The LCD display and keypad allow for direct control over printer functions and settings.
- Use the arrow keys to navigate through menus.
- Pressione o OK botão para selecionar uma opção.
- O Voltar O botão retorna à tela anterior.
- O Lar button returns to the main menu.
Direct USB Printing
The Lexmark MS810n features a USB port for direct printing from a USB flash drive.
Figure 3: A hand inserting a USB flash drive into the dedicated USB port located on the top surface of the printer, near the control panel.
- Insert a USB flash drive into the USB port on the front of the printer.
- The printer's display will prompt you to select a document to print.
- Navegue através do files on the USB drive using the control panel.
- Select the desired document and confirm printing.
Manutenção
Substituindo o cartucho de toner
When the toner level is low, the printer will display a message. Replace the toner cartridge to ensure continued print quality.
- Open the front access door of the printer.
- Grasp the handle of the old toner cartridge and pull it out.
- Unpack the new Lexmark toner cartridge. Gently shake it to distribute the toner.
- Insert the new cartridge into the imaging unit until it clicks into place.
- Close the front access door.
Substituindo a unidade de imagem
The imaging unit has a finite lifespan and will need replacement after a certain number of pages. The printer will notify you when replacement is due.
- Open the front access door.
- Remove the toner cartridge from the imaging unit.
- Grasp the handle of the imaging unit and pull it out of the printer.
- Desembale a nova unidade de imagem.
- Insert the new imaging unit into the printer until it clicks into place.
- Reinstall the toner cartridge.
- Close the front access door.
Limpeza da impressora
- Limpe a parte externa da impressora com um pano macio e seco.amp, pano sem fiapos.
- Não utilize produtos de limpeza abrasivos ou solventes.
- Periodically clean the paper path rollers if paper jams become frequent. Refer to the on-screen instructions or Lexmark support for detailed steps.
Solução de problemas
| Problema | Possível causa | Solução |
|---|---|---|
| A impressora não liga | Cabo de alimentação desconectado; problema na tomada | Ensure power cord is securely connected to printer and outlet. Test outlet with another device. |
| Atolamentos de papel | Incorrect paper loading; Overfilled tray; Foreign objects in paper path | Remove jammed paper carefully. Ensure paper is loaded correctly and not overfilled. Check for and remove any foreign objects. |
| Qualidade de impressão ruim | Low toner; Worn imaging unit; Incorrect print settings | Replace toner cartridge. Replace imaging unit if necessary. Adjust print quality settings in printer driver. |
| Printer not detected on network | Network cable disconnected; Incorrect IP settings; Firewall blocking connection | Verify Ethernet cable connection. Check printer's IP address and network settings. Temporarily disable firewall to test. |
| Códigos de erro em exibição | Problema interno específico | Note the error code and refer to the Lexmark support website or contact technical support for specific solutions. |
Especificações
| Recurso | Detalhe |
|---|---|
| Nome do modelo | MS810n |
| Tecnologia de impressão | Laser (monocromático) |
| Velocidade máxima de impressão (monocromática) | 55 ppm |
| Resolução máxima de impressão | 1200 x 1200 dpi |
| Processador | Núcleo duplo de 800 MHz |
| Memory (Standard/Maximum) | 512 MB / 2.5 GB (upgradable) |
| Conectividade | Ethernet, USB 2.0 |
| Capacidade máxima de entrada de folhas | 4400 folhas (com bandejas opcionais) |
| Tipos de mídia suportados | Envelopes, Paper (plain), Transparencies |
| Tamanhos de mídia suportados | Up to Legal (8.5 x 14 inch) |
| Tipo de exibição | LCD |
| Peso do item | 52.2 libras |
| Dimensões do produto | 21 x 24.5 x 22 polegadas |
Garantia e Suporte
Informações de garantia
The Lexmark MS810n Monochrome Laser Printer comes with a Garantia limitada. For specific terms and conditions, including duration and coverage details, please refer to the warranty documentation included with your product or visit the official Lexmark website.
Suporte Técnico
For technical assistance, driver downloads, or further troubleshooting, please visit the official Lexmark support website. Normalmente, você encontra recursos de suporte, perguntas frequentes e informações de contato do atendimento ao cliente lá.
Official Lexmark Support: www.lexmark.com/en_us/support
