1. Introdução
This instruction manual provides essential information for the safe and efficient operation, setup, and maintenance of your Antari HZ-500 Haze Machine. Please read this manual thoroughly before operating the unit to ensure proper function and to prevent damage or injury. Keep this manual for future reference.
2. Informações de segurança
Adherence to the following safety precautions is crucial for preventing electrical shock, fire, or personal injury.
- Segurança elétrica: Certifique-se de que a unidade esteja conectada a uma tomada aterrada com a voltagem correta.tage as specified on the product label. Disconnect power before performing any maintenance or refilling fluid.
- Uso de fluidos: Use only Antari HZ-500 series haze fluid. Using other fluids may damage the machine and void the warranty. Do not ingest haze fluid. Keep out of reach of children.
- Colocação: Position the machine on a stable, level surface. Ensure adequate ventilation around the unit. Do not block air vents. Maintain a safe distance from flammable materials.
- Operação: Do not operate the machine if it is damaged or malfunctioning. Avoid direct exposure to the haze output at close range. Do not modify the unit.
- Temperatura: The machine generates heat during operation. Avoid touching hot surfaces.
3. Conteúdo da embalagem
Verifique se todos os itens estão presentes na embalagem:
- Máquina de neblina Antari HZ-500
- Cabo de alimentação
- Manual do usuário (este documento)
- (Optional) Remote Control or DMX Cable (if purchased separately or included in specific bundles)
4. Produto acabadoview
The Antari HZ-500 is a professional haze machine designed for continuous output and quiet operation. It features a durable flight case design for portability and protection.
Figura 4.1: Antari HZ-500 Haze Machine with its flight case lid open, revealing the main unit and control panel. The robust construction is visible, designed for touring and professional use.
4.1 Componentes principais
- Haze Output Nozzle: Located on the top surface, where haze is emitted.
- Reservatório de Fluido: Internal compartment for haze fluid.
- Indicador de nível de fluido: A clear window to monitor fluid levels.
- Painel de controle: Features a digital display and buttons for settings adjustment.
- Entrada de energia: IEC connector for the power cord.
- Entrada/Saída DMX: XLR connectors for DMX control.
- Porta de controle remoto: For connecting an optional wired remote.
5. Configuração
5.1 Desembalagem e Colocação
- Carefully remove the HZ-500 from its packaging.
- Place the machine on a flat, stable, and heat-resistant surface.
- Certifique-se de que haja pelo menos 50 cm (20 polegadas) de espaço livre ao redor da unidade para uma ventilação adequada.
- Open the flight case lid to access the machine's controls and fluid reservoir.
5.2 Filling the Fluid Reservoir
- Locate the fluid reservoir cap on the top of the unit.
- Unscrew the cap and carefully pour Antari HZ-500 series haze fluid into the reservoir.
- Monitor the fluid level using the transparent indicator. Do not overfill. The maximum fluid level is clearly marked.
- Securely replace the reservoir cap.
Figura 5.1: Detail of the fluid level indicator on the Antari HZ-500, showing the 'MAX FLUID LEVEL' mark and a 'Never Overfill' warning. This helps users prevent spillage and ensure correct operation.
5.3 Conexão de Energia
- Connect the provided power cord to the power input socket on the rear of the HZ-500.
- Ligue a outra extremidade do cabo de alimentação a uma tomada elétrica aterrada adequada.
- Certifique-se de que o interruptor de alimentação esteja na posição DESLIGADO antes de conectar à energia.
5.4 Control Connection (Optional)
- Controle DMX: Connect a DMX cable from your DMX controller to the DMX IN port on the HZ-500. If linking multiple DMX devices, connect from DMX OUT to the next device's DMX IN.
- Remoto com fio: Connect the optional wired remote control to the designated remote control port.
6. Instruções de operação
6.1 Ligar e aquecer
- Coloque o interruptor de energia na posição ON.
- The machine will begin its warm-up cycle. The digital display will indicate the status.
- Once warmed up (typically a few minutes), the machine is ready for operation.
6.2 Operação do painel de controle
The HZ-500 features a user-friendly control panel for adjusting haze output and settings.
Figura 6.1: Detalhado view of the Antari HZ-500's control panel, featuring a digital display, function buttons, timer, volume, and interval controls, along with a direct haze mode switch. The power input and DMX ports are also visible.
- Botão FUNÇÃO: Navigates through various settings menus.
- Botão TEMPORIZADOR: Activates and adjusts the haze output timer.
- VOLUME Button: Controls the intensity or volume of haze output.
- INTERVAL Button: Sets the delay between haze bursts when using the timer function.
- ON/OFF Switch (Direct Haze Mode): Provides immediate haze output when switched ON, bypassing timer or DMX settings.
6.3 Haze Output
Once the machine is warmed up, you can initiate haze output using the control panel, an optional remote, or DMX control.
Figura 6.2: The Antari HZ-500 Haze Machine actively producing a fine, even haze, demonstrating its operational output.
6.4 Desligando
- Turn off the haze output.
- Flip the main power switch to the OFF position.
- Desconecte o cabo de alimentação da tomada elétrica.
- Deixe a unidade esfriar completamente antes de movê-la ou guardá-la.
7. Manutenção
Regular maintenance ensures the longevity and optimal performance of your HZ-500.
- Limpeza: Periodically wipe the exterior of the machine with a soft, dry cloth. Ensure air vents are free from dust and debris.
- Fluid System: If the machine will be stored for an extended period, it is recommended to drain the fluid reservoir and run a small amount of distilled water through the system to prevent clogs. Consult Antari's official guidelines for detailed cleaning procedures.
- Armazenar: Store the machine in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the fluid reservoir cap is securely fastened.
8. Solução De Problemas
This section addresses common issues you might encounter. For problems not listed here, contact Antari customer support.
| Problema | Possível causa | Solução |
|---|---|---|
| Sem saída de neblina | No power; fluid reservoir empty; clogged nozzle; machine not warmed up. | Check power connection; refill fluid; clean nozzle (refer to maintenance); allow sufficient warm-up time. |
| Weak haze output | Low fluid level; incorrect fluid type; partial clog; low output setting. | Refill fluid; ensure correct Antari HZ-500 fluid is used; clean nozzle; increase output setting on control panel. |
| Machine not responding to DMX | Endereço DMX incorreto; cabo DMX defeituoso; problema no controlador DMX. | Verify DMX address settings on HZ-500; test DMX cable; check DMX controller functionality. |
9. Especificações
Technical specifications for the Antari HZ-500 Haze Machine:
- Modelo: HZ-500
- Peso do item: 74.8 libras
- Dimensões da embalagem: 22.83 x 17.91 x 17.72 polegadas
- Poder: 120VAC 250V/7A (for US models, check label for other regions)
- Tipo de fluido: Antari HZ-500 Series Haze Fluid
- Controlar: On-board digital control, DMX, Optional Wired Remote
- Primeiro disponível: 18 de outubro de 2014
10. Garantia e Suporte
For warranty information, please refer to the warranty card included with your product or visit the official Antari website. For technical support, service, or replacement parts, please contact your authorized Antari dealer or Antari customer service directly. Provide your product model number (HZ-500) and serial number when seeking support.
Antari Official Website: www.antari.com
