Introdução
This manual provides essential information for the proper installation, operation, and maintenance of the Molex 22-11-2062 .100 KK Header. This component is a straight, 6-circuit wire-to-board connector designed for reliable electrical connections in various applications.
Leia atentamente este manual antes de usar o produto para garantir uma operação segura e eficiente.
Produto acimaview
Figura 1: The Molex 22-11-2062 .100 KK Header. This image displays the white plastic housing with six gold-plated pins extending from one side and six silver-colored pins from the other, indicating its straight configuration for wire-to-board connections.
The Molex 22-11-2062 is a key component in electronic assemblies, facilitating secure and stable electrical connections. It features a compact design suitable for various industrial and scientific applications.
Principais características:
- 6-circuit configuration for multiple connections.
- Straight pin orientation for direct board mounting.
- 2.54mm pitch, compatible with standard prototyping and production boards.
- Construção durável para um desempenho confiável.
Configuração e instalação
Proper installation is crucial for the optimal performance and longevity of the KK Header. Follow these steps carefully:
- Preparação: Ensure the printed circuit board (PCB) is clean and free of debris. Verify that the solder pads for the header are correctly aligned and sized for a 2.54mm pitch component.
- Orientação: Identify the correct orientation of the header on the PCB. The straight pins are designed to pass through corresponding holes on the board.
- Inserção: Gently insert the header pins into the designated holes on the PCB. Apply even pressure to ensure all pins are fully seated.
- De solda: Solder each pin to its respective pad on the PCB. Use appropriate soldering techniques to ensure strong, reliable electrical and mechanical connections. Avoid excessive heat to prevent damage to the plastic housing.
- Inspeção: After soldering, visually inspect all solder joints for cold joints, bridges, or insufficient solder. Ensure no pins are bent or shorted.
Observação: Professional installation is recommended for complex electronic assemblies.
Instruções de operação
The Molex 22-11-2062 KK Header functions as a passive connector. Its operation involves establishing and maintaining electrical continuity between a PCB and a mating connector or wire assembly.
Connecting Wires/Mating Connectors:
- Identify Mating Connector: Ensure you have the correct mating connector (e.g., a KK series housing with crimped terminals) that is compatible with the 2.54mm pitch of this header.
- Alinhar: Carefully align the mating connector with the header pins. Observe any polarization features (keys or slots) to ensure correct orientation.
- Inserir: Gently push the mating connector onto the header until it is fully seated. A tactile click may be felt, indicating a secure connection.
- Verifique a conexão: Once connected, gently tug on the mating connector to ensure it is firmly attached and will not easily dislodge.
Disconnecting Wires/Mating Connectors:
- Grasp Connector: Grasp the body of the mating connector, not the wires.
- Pull Straight: Pull the connector straight away from the header. Avoid pulling at an angle, which can bend or damage the pins.
- Inspecionar: After disconnection, inspect both the header and the mating connector for any signs of damage or bent pins.
Manutenção
The Molex 22-11-2062 KK Header requires minimal maintenance. Regular inspection and proper handling will ensure its long-term reliability.
- Limpeza: If dust or debris accumulates on the connector pins, gently clean them using a soft, dry brush or compressed air. For stubborn grime, a lint-free cloth lightly dampened with isopropyl alcohol can be used, ensuring the connector is completely dry before re-use.
- Inspeção: Periodically inspect the header for any signs of physical damage, such as bent or corroded pins, cracked plastic housing, or loose solder joints.
- Armazenar: When not in use, store the headers in a clean, dry, and static-free environment to prevent contamination and damage.
- Evite o estresse: Do not apply excessive force or stress to the connector during connection or disconnection, as this can lead to pin damage or housing breakage.
Solução de problemas
This section addresses common issues that may arise with the Molex 22-11-2062 KK Header.
| Problema | Possível causa | Solução |
|---|---|---|
| Poor or intermittent connection | Bent or corroded pins; improper mating; cold solder joint. | Inspect pins and straighten if bent (use fine pliers); clean corrosion; re-solder joint if necessary; ensure mating connector is fully seated. |
| Difficulty inserting mating connector | Misalignment; bent pins on header or mating connector; incompatible connector. | Verify correct alignment and orientation; check for bent pins on both connectors and carefully straighten; ensure mating connector is compatible (2.54mm pitch, KK series). |
| Header detaches from PCB | Poor solder joints; excessive mechanical stress. | Re-solder all pins, ensuring strong mechanical and electrical connections; reinforce the connection if subject to high vibration or stress. |
If issues persist after attempting these solutions, consider consulting a qualified electronics technician.
Especificações
Below are the technical specifications for the Molex 22-11-2062 .100 KK Header:
- Número do modelo: 22-11-2062
- Marca: Molex
- Tipo: Wire-to-Board Header
- Configuração: Direto
- Número de circuitos: 6
- Tom: 2.54mm (.100 inch)
- Fabricante: MOLEX
- ASIN: B00DEDBWAW
- Número de estoque nacional: 5935-01-164-3596
- Primeiro disponível: 24 de outubro de 2014
Garantia e Suporte
Information regarding specific warranty terms for the Molex 22-11-2062 .100 KK Header is typically provided at the point of purchase or through official Molex documentation. For detailed warranty information or technical support, please refer to the official Molex website ou entre em contato diretamente com o atendimento ao cliente.
Fabricante: MOLEX
Para obter mais ajuda, visite: www.molex.com
