Introdução
Thank you for choosing the Casio TQ-362-4ADF Analog Alarm Clock. This manual provides detailed instructions for the proper setup, operation, and maintenance of your new alarm clock. Please read this manual thoroughly before use to ensure optimal performance and longevity of the product.

Imagem: Frente view of the Casio TQ-362-4ADF Analog Alarm Clock, featuring a red casing, black dial with green luminous numbers, and silver bells and feet.
Configurar
1. Instalação da bateria
- Open the battery compartment cover located on the back of the alarm clock.
- Insira duas (2) pilhas AA, certificando-se da polaridade correta (+ e -) conforme indicado dentro do compartimento.
- Feche bem a tampa do compartimento da bateria.
2. Definição da hora
- Localize o botão de ajuste de hora na parte traseira do relógio.
- Rotate the knob in either direction to move the hour and minute hands to the current time.
- For best accuracy, set the time slightly ahead and then rotate backward to the exact time.
Instruções de operação
1. Configurar o horário do alarme
- Localize o botão de ajuste do alarme na parte traseira do relógio.
- Gire este botão para mover o ponteiro pequeno do alarme para a hora desejada.
- Certifique-se de que o interruptor LIGAR/DESLIGAR do alarme (geralmente uma pequena alavanca ou botão) esteja na posição 'LIGADO'.
2. Ativar/Desativar o Alarme
- To activate the alarm, slide the alarm ON/OFF switch to the 'ON' position.
- To deactivate the alarm, slide the alarm ON/OFF switch to the 'OFF' position.
3. Função soneca
- When the alarm sounds, press the snooze button (typically located on the top of the clock).
- The alarm will temporarily stop and sound again after a few minutes (duration may vary by model).
- To fully stop the alarm, slide the alarm ON/OFF switch to the 'OFF' position.

Imagem: Traseira view of the Casio TQ-362-4ADF Analog Alarm Clock, illustrating the time setting knob, alarm setting knob, and alarm ON/OFF switch.
Manutenção
Limpeza
- Limpe o relógio com um pano macio e seco.
- Do not use abrasive cleaners, solvents, or chemical sprays, as these may damage the casing ou componentes internos.
Substituição da bateria
- Replace batteries when the clock starts to lose time or the alarm sound weakens.
- Always replace both batteries at the same time with new, identical AA batteries.
- Descarte as baterias usadas de acordo com os regulamentos locais.
Solução de problemas
| Problema | Solução |
|---|---|
| Clock is not running or losing time. | Check battery installation. Replace with fresh AA batteries. |
| O alarme não dispara. | Ensure the alarm ON/OFF switch is in the 'ON' position. Verify alarm time is set correctly. Check battery strength. |
| Alarm is too quiet. | Replace batteries with fresh ones. The alarm volume is fixed and cannot be adjusted. |
Especificações
| Recurso | Detalhe |
|---|---|
| Número do modelo | TQ-362-4ADF |
| Tipo | Despertador Analógico |
| Material | Resina (Plástico) |
| Cor | Vermelho |
| Dimensões (C x L x A) | 6 x 3.81 x 13.6 cm |
| Peso | 147.83 gramas |
| Pilhas necessárias | 2 pilhas AA |
| Componentes incluídos | Battery, strap, operating instructions (Note: 'strap' likely refers to packaging or a small component, not a wearable strap for this type of clock) |
Garantia e Suporte
Casio products are manufactured to high-quality standards. For information regarding warranty coverage, service, or technical support, please refer to the warranty card included with your product or visit the official Casio webGuarde o comprovante de compra como prova para eventuais solicitações de garantia.
For further assistance, you may contact Casio customer service through their official channels.





