1. Introdução
This manual provides instructions for the installation, operation, and maintenance of your Lepro 12V LED Strip Light. This flexible, non-waterproof LED tape light is designed for indoor decorative and accent lighting applications. Please read this manual thoroughly before installation and use.
2. Informações de segurança
- Adaptador de energia: A 12V DC power adapter is não incluso and must be purchased separately. Ensure the power adapter's output voltage is exactly 12V. Using a higher voltage adapter will damage the LED strip.
- O quetage: O total wattage of the LED strip (18W for 16.4ft) must not exceed the maximum wattage rating of your power adapter.
- Aquecer: The LED strip operates at an extremely low heat, making it safe to touch.
- Resistência à água: Este produto é não à prova d'água and intended for indoor use only. Avoid exposure to water or high humidity.
- Manuseio: The LED strip is flexible but fragile. Handle with care during installation to prevent tearing or damage to the PCB.
- Corte: Only cut the LED strip at designated cutting marks (every 3 LEDs) to avoid damaging the circuit.
3. Conteúdo da embalagem
Verifique se todos os componentes estão presentes no seu pacote:
- 1 x Lepro 12V LED Strip Light (16.4 ft)
- Accessories (e.g., connectors, clips - specific accessories may vary, power adapter not included)
Figure 3.1: Package Contents. Note: 12V power supply sold separately.
4. Especificações
| Recurso | Detalhe |
|---|---|
| Número do modelo | 4100057-WW |
| Tipo de luz | LED Strip Light (SMD 2835) |
| Comprimento | 16.4 ft (metros 5) |
| Cor clara | Branco quente |
| Temperatura de cor | 3000 Kelvin |
| Volumetage | Corrente contínua 12 V |
| O quetage | 18 Watts |
| Fluxo Luminoso | 1200 Lúmens |
| Número de LEDs | 300 |
| Regulável | Não (Não é regulável) |
| Uso interno/externo | Somente em ambientes internos |
| Material | Silicone |
| Peso do item | 60 gramas (2.12 onças) |
Eficiência Energética
Figura 4.1: Etiqueta de Eficiência Energética. Para mais detalhes, visite [link para o site]. eprel.ec.europa.eu/qr/1056793.
5. Instruções de configuração
5.1 Componentes Acimaview
Figure 5.1: LED Strip Light Components. A 12V power supply is required and sold separately.
5.2 Etapas de instalação
- Prepare a superfície: Ensure the surface where the LED strip will be applied is clean, dry, and smooth. Wipe the surface with a clean cloth to remove any dust or debris.
- Medir e cortar (opcional): If a shorter length is desired, measure the required length. The LED strip can be cut every 3 LEDs along the designated cutting marks. Use sharp scissors for a clean cut. Note: 2-pin 8mm connectors are not included if you cut the strip.
- Aplique a fita: Peel off the protective backing from the self-adhesive tape on the back of the LED strip. Carefully press the strip onto the prepared surface, ensuring firm contact along its entire length.
- Conecte a energia: Conecte a fita de LED a um adaptador de energia de 12V DC compatível (não incluído). Certifique-se de que a polaridade esteja correta.
Figure 5.2: Installation Process: Clean surface, peel adhesive, and cut at marks.
6. Instruções de operação
Once properly installed and connected to a 12V DC power adapter, the LED strip light will illuminate when the power adapter is plugged into an electrical outlet. This model is não pode ser escurecido and does not include a controller. To turn the lights on or off, you must control the power supply directly (e.g., by plugging/unplugging or using a switched outlet).
6.1 Produto em Uso
Figura 6.1: Example of Warm White LED Strip Light application in a living space.
Figure 6.2: Warm White 3000K LED lighting in a home environment.
6.2 Demonstração em vídeo
Video 6.1: Warm White LED Lights Strip for Bedroom. This video demonstrates the appearance of the warm white LED strip lights in a bedroom setting.
7. Manutenção
- Limpeza: To clean the LED strip, ensure it is unplugged from the power source. Gently wipe the surface with a soft, dry cloth. Do not use abrasive cleaners or immerse the strip in water.
- Manuseio: Avoid bending the strip sharply or applying excessive force, as this can damage the internal circuitry.
- Armazenar: If storing the LED strip, roll it loosely on its original reel or a similar circular object to prevent kinks or damage.
8. Solução De Problemas
| Problema | Possível causa | Solução |
|---|---|---|
| A fita de LED não acende. | Sem energia, volume incorretotage, faulty power adapter, or damaged strip. | Ensure the 12V power adapter is correctly plugged in and functioning. Verify the power adapter output is 12V DC. Check for visible damage to the strip or connections. |
| Portions of the strip are not lighting up. | Damage to a section of the strip, incorrect cutting, or faulty connection. | Inspect the unlit section for physical damage or improper cuts. Ensure any connectors used are secure. |
| A cola não está fixando a tira. | Surface was not clean or smooth, or adhesive has lost its stickiness. | Clean the surface thoroughly before application. For persistent issues, consider using additional adhesive clips or a stronger double-sided tape (e.g., hot glue as a temporary solution, as mentioned in customer reviews, but be aware of potential damage upon removal). |
9. Garantia e suporte
9.1 Informações de garantia
This Lepro LED Strip Light comes with a Garantia de 2 ano A garantia é válida a partir da data da compra. Esta garantia cobre defeitos de fabricação em condições normais de uso. Não cobre danos causados por instalação incorreta, uso indevido, acidentes ou modificações não autorizadas.
9.2 Suporte ao cliente
For technical assistance, warranty claims, or any questions regarding your Lepro product, please contact Lepro customer support through the retailer's platform or visit the official Lepro website para informações de contato.
