1. Introdução
The Einhell GC-DP 1340 G dirty water pump is a powerful and robust tool designed for demanding drainage tasks. It is ideal for pumping heavily contaminated water from various sources such as ponds, wells, construction sites, and flooded basements. With a high flow rate and durable construction, this pump ensures efficient and reliable performance.
Figure 1: Einhell GC-DP 1340 G Dirty Water Pump and included rope.
2. Instruções de segurança
Siga sempre as seguintes diretrizes de segurança para evitar ferimentos e danos ao equipamento:
- Read the entire manual before operating the pump.
- Ensure the power supply matches the pump's specifications (230 Volts).
- Não utilize a bomba se o cabo de alimentação ou a ficha estiverem danificados.
- Never lift or carry the pump by its power cord. Use the transport handle or the provided rope.
- Mantenha crianças e pessoas não autorizadas afastadas da área de operação.
- Do not pump flammable, explosive, or corrosive liquids.
- Ensure adequate ventilation when operating in enclosed spaces.
- Disconnect the pump from the power supply before any maintenance or cleaning.
3. Componentes do produto
Familiarize yourself with the main components of your Einhell dirty water pump:
4. Configuração
Follow these steps for proper setup of your dirty water pump:
- Anexe a mangueira: Securely connect a 2-inch (50.8mm) discharge hose to the pump's G2 connection. Ensure the connection is tight to prevent leaks.
- Posicionamento: Place the pump on a stable, level surface in the area to be drained. Ensure the pump is fully submerged in the water for optimal operation.
- Espaço Operacional: Allow for sufficient operating space around the pump, with a minimum of 50 x 50 cm, and a diameter of 27 cm for the pump itself.
- Ajuste do interruptor de nível: Adjust the float switch cable length to control the desired ON/OFF water levels. A shorter cable means the pump will switch on and off within a smaller water level range.
- Conexão de energia: Plug the pump into a grounded electrical outlet that matches the pump's voltage requisitos.
Figure 2: Recommended minimum operating space for the pump.
5. Instruções de operação
The Einhell GC-DP 1340 G pump can operate in continuous or automatic mode:
5.1. Automatic Operation (Float Switch Controlled)
In automatic mode, the pump starts and stops based on the water level, controlled by the float switch. When the water level rises and lifts the float switch, the pump will activate. When the water level drops and the float switch lowers, the pump will deactivate.
Figure 3: Adjustable float switch for automatic operation.
5.2. Operação Contínua
For continuous operation, secure the float switch in an upright position (e.g., by attaching it to the pump handle) so that it remains in the "ON" position regardless of the water level. This will keep the pump running continuously until manually unplugged or the water source is depleted.
The pump is designed to handle dirty water with particles up to 40 mm in size.
Figure 4: Maximum particle size handled by the pump.
6. Manutenção
A manutenção regular garante a longevidade e o desempenho ideal da sua bomba:
- Limpeza: After each use, especially when pumping heavily contaminated water, rinse the pump thoroughly with clean water to remove debris and prevent clogging.
- Inspeção do impulsor: Periodically check the impeller for any blockages or damage. Clear any debris carefully.
- Double Mechanical Seal: The high-quality double mechanical seal is designed for excellent durability and requires no maintenance.
- Armazenar: Guarde a bomba em local seco e livre de geadas quando não estiver em uso por longos períodos.
Figura 5: interno view of the pump's impeller.
Figure 6: Illustration of the double mechanical seal for extended lifespan.
7. Solução De Problemas
| Problema | Possível causa | Solução |
|---|---|---|
| A bomba não arranca. | No power supply; Float switch not activated; Motor overload. | Check power connection and circuit breaker; Ensure float switch is in "ON" position or water level is sufficient; Allow motor to cool down, then restart. |
| A bomba funciona, mas não há descarga de água ou o fluxo é baixo. | Hose kinked or blocked; Impeller clogged; Airlock in pump. | Check and clear hose; Disconnect power and clear impeller; Submerge pump fully, tilt it to release air bubbles, then restart. |
| A bomba para inesperadamente. | Float switch deactivated (water level too low); Thermal overload protection activated. | Check water level and float switch position; Allow pump to cool down. |
8. Especificações
| Recurso | Especificação |
|---|---|
| Modelo | GC-DP 1340 G |
| Poder | 1300 Watts |
| Volumetage | 230 Volts |
| Máx. Quociente de vazão | 23000 litros por hora |
| Altura máxima da cabeça | 10 metros |
| Tamanho Máx. de Partícula | 40 milímetros |
| Conexão de mangueira | G2 (2 inches / 50.8mm) |
| Comprimento do cabo | 10 metros |
| Peso | 19.3 quilos |
| Dimensões (C x L x A) | 26 x 19.5 x 51.2 cm |
| Material | Aço inoxidável, ferro fundido |
| Uso | Ar livre |
| País de origem | China |
9. Garantia e Suporte
Einhell products are manufactured with high-quality materials and undergo strict quality controls. While specific warranty details may vary by region and retailer, a standard return policy of 30 days is typically offered for new products.
For technical support, spare parts, or warranty claims, please contact your authorized Einhell dealer or visit the official Einhell website for customer service information. Please have your model number (GC-DP 1340 G) and purchase details ready when contacting support.
Para mais informações, visite o Einhell Brand Store.
