SSV Works WP3-UO4LA

SSV Works WP3-UO4LA Universal Overhead Stereo System

Model: WP3-UO4LA

Introdução

This manual provides detailed instructions for the installation, operation, and maintenance of your SSV Works WP3-UO4LA Universal 4 Speaker Overhead Stereo System. This system is designed to deliver high-quality audio in various UTV models, including Kawasaki Teryx 2 and 4, Polaris Ranger 400, 800, and 900XP, Yamaha Viking and Rhino, and Honda Pioneer 700. Please read this manual thoroughly before installation and use to ensure proper function and longevity of your product.

Informações de segurança

Observe sempre as seguintes precauções de segurança:

  • Ensure the vehicle's ignition is off and the battery is disconnected before beginning any electrical installation.
  • Use equipamentos de segurança adequados, incluindo proteção ocular, durante a instalação.
  • Verifique se todas as conexões da fiação estão seguras e devidamente isoladas para evitar curtos-circuitos.
  • Do not operate the system at excessively high volumes for extended periods, as this may cause hearing damage.
  • Keep the system clear of obstructions that could impede sound or airflow.
  • Este produto contém produtos químicos conhecidos no Estado da Califórnia por causar câncer e defeitos congênitos ou outros danos reprodutivos. Lavar as mãos após o manuseio.

Conteúdo da embalagem

Verifique se todos os componentes estão presentes antes de iniciar a instalação:

  • SSV Works WP3-UO4LA Universal Overhead Stereo System Unit
  • Mounting Hardware (stainless steel)
  • Chicote de Fiação
  • Instruções de instalação (este manual)

Instalação

The SSV Works WP3-UO4LA system is designed for overhead mounting in UTVs. Installation typically takes approximately 15 minutes with basic tools.

SSV Works WP3-UO4LA Universal 4 Speaker Overhead Stereo System

Uma sobrecarga view of the SSV Works WP3-UO4LA Universal 4 Speaker Overhead Stereo System. The unit features four 6.5-inch marine-grade speakers, two on each side, flanking a central control panel. The control panel includes a digital display for audio functions and buttons for operation. Below the main display, there is an integrated light bar. The entire unit is housed in a black, textured fiberglass enclosure designed for overhead mounting in UTVs.

Montagem

  • The system is compatible with roll cages ranging from 51 to 58.75 inches in width.
  • The mounting brackets are adjustable and slide along the back of the sound bar, allowing for flexible positioning (front, overhead, or rear) within the roll cage.
  • Securely attach the unit to the vehicle's roll cage using the provided stainless steel mounting hardware. Ensure all screws are tightened to prevent vibration. Applying thread-locking compound (e.g., Loctite) to screws is recommended to prevent loosening due to vehicle vibration.

Fiação

  • The system requires a simple 2-wire hookup. Connect the positive (+) wire to a switched 12V power source and the negative (-) wire to a reliable ground point on the vehicle chassis.
  • For optimal performance and to prevent Bluetooth disconnection issues when the ignition is turned off, it is recommended to connect the power directly to the battery with an inline fuse, or to a constant 12V source via a separate switch.
  • The built-in 200-watt 4-channel amplifier powers the four 6.5-inch marine-grade speakers. The front two channels are internally configured for the soundbar speakers. The rear two channels are available for powering up to four additional 4-ohm speakers if wired correctly.
  • An optional RCA low-level output is available for system expansion (requires WP-HRCA adapter, sold separately).

Operação

Emparelhamento Bluetooth

  • Power on the stereo system.
  • Navigate to the Bluetooth mode on the system's display.
  • No seu smartphone ou outro dispositivo com Bluetooth, procure por dispositivos Bluetooth disponíveis.
  • Select "SSV Works" (or similar name displayed on the unit) from the list to pair.
  • Once paired, you can stream audio from your device, including music streaming apps like Pandora, Spotify, and SoundCloud.

Rádio AM/FM

  • Switch the system to AM/FM radio mode.
  • Use the controls on the unit to scan for stations or manually tune to a desired frequency.
  • The system includes an internal FM antenna for local radio reception.

External Audio Output

  • If using the optional RCA low-level output, connect it to an external amplifier or additional speakers as per the WP-HRCA adapter instructions.

Manutenção

The WP3-UO4LA features a durable fiberglass construction and a weatherproof design, allowing it to withstand various environmental conditions.

  • Limpeza: Use um pano macio e macioamp cloth to clean the exterior of the unit. Avoid harsh chemicals or abrasive cleaners that could damage the finish or components.
  • Inspeção: Periodically check all mounting hardware and wiring connections to ensure they remain secure, especially after off-road use.
  • Armazenar: If storing the vehicle for an extended period, ensure the stereo system is powered off.

Solução de problemas

EmitirPossível causaSolução
Sem energia para a unidadeLoose wiring connection, blown fuse, incorrect power source.Check all power and ground connections. Inspect the fuse in the wiring harness and replace if necessary. Ensure the power source is providing 12V.
Bluetooth desconecta com frequênciaPower source issues (e.g., connected to a keyed ignition that cuts power), interference.Connect the unit directly to the battery with an inline fuse, or to a constant 12V source via a separate switch. Ensure your device is within range and there are no major sources of interference.
Má recepção de rádioWeak signal, environmental factors.The system uses an internal FM antenna. Reception quality can vary based on location and terrain. Try moving to an area with better signal.
A unidade vibra ou faz barulho de chocalho.Loose mounting hardware, internal components rattling.Tighten all mounting screws. Consider using thread-locking compound. If internal rattling occurs, contact SSV Works support.
Não há som nos alto-falantesVolume too low, incorrect source selected, speaker wiring issue.Increase volume. Verify the correct audio source (Bluetooth, AM/FM) is selected. Check speaker connections if accessible.

Especificações

RecursoDetalhe
Número do modeloWP3-UO4LA
MaterialFibra de vidro
Tipo de alto-falanteCoaxial, 6.5 Inches
Ampmais vivoBuilt-in 200 Watt (50 Watts x 4 channels)
ConectividadeBluetooth, AM/FM Radio
Características especiaisÀ prova d'água, Rádio
Dispositivos compatíveisUTV (Kawasaki Teryx, Polaris Ranger, Yamaha Viking & Rhino, Honda Pioneer 700)
Tipo de montagemBar Mount (adjustable for 51" - 58.75" width)
Dimensões49 x 7 x 11 polegadas
Peso do item26 libras
Modo de saída de áudioEstéreo
Sinal-Ruído90 dB
UPC815172011019

Garantia e Suporte

For warranty information and technical support, please refer to the official SSV Works webou entre em contato diretamente com o serviço de atendimento ao cliente. Guarde o comprovante de compra como prova para eventuais solicitações de garantia.

Documentos relacionados - WP3-UO4LA

Préview Guia de Instalação do Kit de Áudio SSV Works RG4-Q3VRC com 3 Alto-falantes e LEDs RGB para Polaris Ranger XP1000 2018 em diante com Ride Command
Comprehensive installation guide for the SSV Works RG4-Q3VRC 3 Speaker RGB LED Audio Kit, designed for the 2018-Up Polaris Ranger XP1000 with Ride Command. Includes parts lists, disassembly, assembly, and wiring instructions.
Préview Guia de Instalação do Kit de Áudio com 3 Alto-falantes SSV Works RG4-Q3A1 para Polaris Ranger XP1000
Comprehensive installation guide for the SSV Works RG4-Q3A1 3 Speaker Audio Kit Phase 3 with JVC MR1, designed for 2018-Up Polaris Ranger XP1000 models. Includes parts lists, wiring diagrams, and step-by-step instructions for installing speakers, ampAmplificador e unidade principal.
Préview SSV Works RZ5-PHZ2A Polaris RZR Pro Speaker System Installation Guide
This guide provides comprehensive, step-by-step instructions for installing the SSV Works RZ5-PHZ2A Phase-2 A-Spec 4 Speaker System with JVC MR1 into 2020-2024 Polaris RZR Pro vehicles. It covers panel disassembly, dash kit assembly, speaker pod installation for both dash and rear cage locations, and detailed wiring diagrams.
Préview Guia de Instalação do Kit de 2 Alto-falantes SSV Works RZ4-2ARC para Polaris RZR XP Turbo S
Guia de instalação passo a passo do kit de 2 alto-falantes SSV Works RZ4-2ARC, com alto-falantes Kicker, para o Polaris RZR XP Turbo S. Inclui lista de peças, ferramentas necessárias, informações sobre a garantia e instruções detalhadas de fiação. amp Instalação da bandeja, montagem do suporte do alto-falante e conexões da bateria.
Préview Guia de Instalação do Sistema de Som de 4 Alto-falantes SSV Works RZ5-PHZ2A para Polaris RZR Pro
Guia de instalação detalhado para o sistema de som SSV Works RZ5-PHZ2A Fase 2 A-Spec de 4 alto-falantes com JVC MR1 para os modelos Polaris RZR Pro de 2020 a 2024. Inclui listas de peças, diagramas de fiação e instruções passo a passo para instalação no painel e no compartimento traseiro.
Préview Guia de Instalação do Kit de Áudio de 5 Alto-falantes SSV Works RZ5-Q5A2 para Polaris RZR Pro XP
Guia de instalação completo para o kit de áudio SSV Works RZ5-Q5A2 com 5 alto-falantes e receptor MRB2R para os modelos Polaris RZR Pro XP de 2019 em diante. Inclui instruções detalhadas para a desmontagem. amp Instalação da placa, configuração do MRB2R, instalação do subwoofer, montagem dos suportes dos alto-falantes dianteiros e traseiros e fiação.