1. Introdução
Obrigado pela compra.asing the Hotone Nano Legacy Purple Wind 5-Watt Compact Guitar Amp Head. This ultra-compact amplifier head is designed to deliver premium guitar tones, inspired by the legendary Marshall Plexi Super Lead 1959, in a portable format. This manual provides essential information for safe and effective use of your ampmais vivo.
2. Informações de segurança
- Fonte de energia: Use only the specified power adapter (18V DC, center negative).
- Ventilação: Garanta ventilação adequada para evitar superaquecimento. Não bloqueie as aberturas de ventilação.
- Umidade: Não exponha o aparelho à chuva, umidade ou umidade excessiva.
- Manuseio: Manuseie com cuidado. Evite deixar cair ou submeter a unidade a impactos fortes.
- Manutenção: Não tente realizar a manutenção desta unidade por conta própria. Encaminhe todos os serviços de manutenção a pessoal qualificado.
- Conexão do alto-falante: Sempre conecte o amplifier to a speaker cabinet with the correct impedance (4-16Ω) before powering on to prevent damage.
3. Produto acabadoview
The Hotone Nano Legacy Purple Wind is a compact 5-watt guitar amplifier head featuring a 3-band EQ and an FX loop. Its design is inspired by classic British rock tones.
Controles do painel frontal
- ENTRADA: 1/4" mono jack to plug in your guitar.
- GRAVES: Controls the low frequency response.
- MEIO: Controls the mid frequency response.
- AGUDOS: Controls the high frequency response.
- GANHO: Controls the gain level.
- VOLUME: Controla o volume de saída.
- Chave ON / OFF: Liga ou desliga a unidade.
Conexões do painel traseiro
- 18 V DC: Plug in DC 18V adapter (center negative).
- SAÍDA DE TELEFONES/LINHA: 1/8" stereo jack, for using headphones or recording.
- ENTRADA AUX: 1/8" stereo jack, for connecting an external music player.
- RETORNO DO LOOP FX: 1/4" mono jack, connect to your effects output jack.
- SAÍDA DO ALTO-FALANTE: 1/4" mono jack, connect to your cabinet (speaker 4-16Ω).
- ENVIO DE LOOP FX: 1/4" mono jack, connect to your effects input jack (The Effects Loop is a patch point between the pre-amp e poder amp).
4. Configuração
- Connect Speaker Cabinet: Before powering on, connect a speaker cabinet (4-16Ω impedance) to the SPEAKER OUTPUT jack on the rear panel using a 1/4" mono speaker cable. Failure to connect a speaker cabinet before powering on can damage the ampmais vivo.
- Conecte a energia: Plug the included 18V DC power adapter into the 18V DC input on the rear panel, then plug the adapter into a suitable power outlet.
- Conectar guitarra: Plug your guitar into the INPUT jack on the front panel using a 1/4" mono instrument cable.
- Configurações iniciais: Turn the VOLUME and GAIN knobs to their minimum (counter-clockwise) positions before powering on.
- Ligar: Flip the ON/OFF switch to the 'ON' position. The indicator light will illuminate.
5. Instruções de operação
- Ajustando o tom: Use the BASS, MIDDLE, and TREBLE knobs to shape your desired tonal characteristics. Experiment with different settings to find your preferred sound.
- Ajustando o ganho: The GAIN knob controls the amount of overdrive and distortion. Turn clockwise for more aggressive tones.
- Ajustando o volume: The VOLUME knob controls the overall output level of the amplifier. Adjust to your desired listening level.
- Using the FX Loop: Connect external effects pedals between the FX LOOP SEND and FX LOOP RETURN jacks to integrate them into your signal chain after the preamp seção.
- Headphone/Line Out: For silent practice or direct recording, connect headphones or a line-level device to the PHONES/LINE OUTPUT. This output includes speaker cabinet simulation.
- ENTRADA AUX: Connect an external audio source (e.g., MP3 player, smartphone) to the AUX IN jack to play along with backing tracks.
6. Manutenção
- Limpeza: Use um pano macio e seco para limpar o amplifier's exterior. Do not use liquid cleaners or solvents.
- Armazenar: Armazene o ampColoque o amplificador em local seco e fresco, longe da luz solar direta e de temperaturas extremas.
- Cuidados com o tubo: As a hybrid amplificador, o préamp tube may eventually need replacement. If you notice a significant change in tone or performance, consult a qualified technician.
7. Solução De Problemas
| Problema | Possível causa | Solução |
|---|---|---|
| Sem som | Power not connected, speaker not connected, volume/gain too low, faulty cable. | Check power connection, ensure speaker is connected, increase volume/gain, test with different cables. |
| Som fraco ou distorcido | Faulty cable, incorrect impedance, worn preamp tubo. | Test cables, ensure correct speaker impedance, consult technician for tube replacement. |
| Excessive hum/noise | Loop de terra, fonte de alimentação defeituosa, interferência de outros componentes eletrônicos. | Try different power outlets, use a power conditioner, move away from other electronic devices. |
8. Especificações
- Potência de saídatage: 5 Watts
- Fonte de energia: Elétrico com fio (18V CC, centro negativo)
- Peso do item: 15.5 onças
- Dimensões do produto: 2.34 x 5.03 x 2.95 polegadas
- Dispositivos compatíveis: Guitarra
- Tipo de conector: 6.35mm Jack (Input, Speaker Output, FX Loop Send/Return), 3.5mm Jack (Phones/Line Out, AUX IN)
- Impedância do alto-falante: 4-16 Ohms
- Número do modelo: TANLA2
9. Vídeos de Produtos
OriPure 5W Tube Guitar AmpCabeça de licker
Descrição do vídeo: This video showcases the OriPure 5W Tube Guitar Amplifier Head, demonstrating its features and sound. It highlights the tube components and various controls, providing an overview of its performance capabilities.
The Joyo Jackman II Is Like A Tiny Marshall JCM 800.
Descrição do vídeo: Este vídeo fornece uma análise detalhada.view and demonstration of the Joyo Jackman II amplifier head, comparing its sound characteristics to a Marshall JCM 800. It covers clean and dirty tones, control adjustments, and overall performance.
OriPure 15W Tube Guitar Amplifier Head OA-H15
Descrição do vídeo: This video demonstrates the OriPure 15W Tube Guitar Amplifier Head (Model OA-H15), showcasing its sound quality and features. It includes various guitar riffs and tone adjustments to illustrate its versatility.
JOYO Meteor II BanTamp Série XL Mini Amp Head 20 Watt
Descrição do vídeo: This video presents the JOYO Meteor II BanTamp Série XL Mini Amp Head, a 20-watt hybrid tube amplifier. It demonstrates the amplifier's clean and overdrive channels, tone controls, and built-in Bluetooth functionality for playing backing tracks.
Valeton Guitar Amplifier Head TAR-20G Amp Pedal Platform Studio Desktop with CAB SIM
Descrição do vídeo: This video showcases the Valeton Guitar Amplifier Head TAR-20G, highlighting its features as an amp pedal platform and desktop studio amplifier with built-in cab simulation. It demonstrates various tones and connectivity options.
JOYO 20W Amplifier Head BanTamP Series ATOMIC
Descrição do vídeo: This video features the JOYO 20W Amplifier Head from the BanTamP Series, specifically the ATOMIC model. It demonstrates the amplifier's sound characteristics and features, designed for AC lovers.
10. Garantia e Suporte
For warranty information and technical support, please refer to the official Hotone webou entre em contato com seu revendedor autorizado. Guarde o comprovante de compra como prova de aquisição.
