SOMFY Situo RTS Pure Radio Wall Transmitter

Introdução

This manual provides instructions for the installation, operation, and maintenance of your SOMFY Situo RTS Pure radio wall transmitter. This device is designed for the manual control of one or more radio-controlled Somfy drives, such as blinds, awnings, or roller shutters. Please read this manual carefully before using the product to ensure safe and correct operation.

Instruções de segurança

• Mantenha o dispositivo longe da umidade e de temperaturas extremas.
• Não tente abrir ou reparar o dispositivo por conta própria. Encaminhe todos os serviços de manutenção a pessoal qualificado.
• Certifique-se de que a bateria esteja inserida corretamente, respeitando a polaridade indicada.
• Descarte as baterias usadas de maneira responsável, de acordo com os regulamentos locais.
• Este dispositivo é destinado somente para uso interno.

Produto acimaview

The SOMFY Situo RTS Pure is a sleek, handheld radio transmitter designed for intuitive control of your Somfy RTS products.

Esta imagem mostra a frente view of the SOMFY Situo RTS Pure radio wall transmitter. It is a white, rectangular device with three gray circular buttons arranged vertically in the center: an 'up' arrow, a 'my' button, and a 'down' arrow. Below the buttons, there is a small black indicator light. The Somfy logo is subtly embossed at the bottom.

Componentes principais:

• Botão para cima (^): Moves the connected drive upwards (e.g., opens blinds).
• My Button (my): Stops the drive or recalls a pre-programmed favorite position.
• Botão para baixo (v): Moves the connected drive downwards (e.g., closes blinds).
• Luz indicadora: Provides visual feedback on commands and battery status.
• Programming Button (rear): Used for pairing the transmitter with Somfy RTS drives.

Configurar

1. Instalação da bateria

1. Gently slide open the battery compartment cover on the back of the transmitter.
2. Insert the supplied battery (type CR2430) ensuring correct polarity (+/-).
3. Feche bem a tampa do compartimento da bateria.

2. Pairing with a Somfy RTS Drive

To control a Somfy RTS drive, the transmitter must first be paired. This process typically involves using an existing paired transmitter or the drive's programming button.

1. Using an existing transmitter: Take an already programmed RTS transmitter that controls the desired drive. Press and hold its programming button (usually on the back) until the drive moves briefly.
2. Immediately after the drive moves, take your new Situo RTS Pure transmitter. Press and hold its programming button (located on the back, often recessed) until the drive moves briefly again. This confirms successful pairing.
3. Without an existing transmitter: Refer to the specific instructions for your Somfy RTS drive to put it into programming mode. Once the drive is in programming mode, press the programming button on your Situo RTS Pure transmitter until the drive moves briefly.

Note: If you are pairing with multiple drives, repeat the process for each drive or group of drives.

Instruções de operação

Controle Básico:

• To move the drive up (e.g., open blinds), press the ^ botão.
• To move the drive abaixo (e.g., close blinds), press the v botão.
• Para parar the drive at any point, press the my botão.

Setting a Favorite Position ('my' position):

1. Move the drive to your desired favorite position using the ^ or v botões.
2. Once at the desired position, press and hold the my button until the drive moves briefly. This saves the position.

Recalling a Favorite Position:

• From any position, a short press of the my button will move the drive to its pre-programmed favorite position.

Manutenção

Substituição da bateria:

When the indicator light on the transmitter no longer illuminates or the range decreases significantly, it is time to replace the battery.

1. Slide open the battery compartment cover on the back of the transmitter.
2. Remova a bateria CR2430 antiga.
3. Insira uma nova bateria CR2430, observando a polaridade correta (+/-).
4. Feche a tampa do compartimento da bateria.

Note: Dispose of old batteries according to local environmental regulations.

Limpeza:

Clean the transmitter with a soft, dry cloth. Do not use abrasive cleaners or solvents.

Solução de problemas

Especificações

• Modelo: Situo RTS Pure
• Número do modelo do fabricante: 322147
• Marca: Somfy
• Frequência de rádio: 433.42 MHz
• Rolling Code System: Sim
• Faixa: Approximately 20 meters (indoors, depending on environment)
• Tipo de Bateria: CR2430 (incluído)
• Dimensões: 1 x 1 x 1 cm (approximate, as per product data); 60 grams
• Uso pretendido: Interior

Garantia e Suporte

For warranty information and technical support, please refer to the official Somfy website or contact your local Somfy dealer. Keep your proof of purchase for warranty claims.

Recursos on-line: www.somfy.com