1. Introdução
This manual provides essential information for the safe and efficient operation of your Behringer NU4-6000 Ultra-Lightweight, High-Density, 6000-Watt 4-Channel Power Amplifier. Please read it thoroughly before use and retain it for future reference.
Principais características:
- Delivers 4 x 1600 Watts into 2 Ohms, 2 x 3000 Watts into 4 Ohms, weighing less than 12 lbs / 5.5 kg.
- Confiabilidade máxima graças à revolucionária tecnologia High-D de Classe D com funcionamento a frio e acumulação térmica "quase nula".
- Ultra-efficient switch-mode power supply for noise-free audio, superior transient response, and low power consumption.
- "Zero-Attack" limiters offer maximum output level with reliable overload protection.
- Built-in stereo crossover with low-cut, high-cut, and full range mode.
2. Configuração
2.1 Desembalagem e Colocação
Desembale cuidadosamente o amplifier and inspect it for any signs of damage. Place the amplifier in a well-ventilated area, preferably in a standard 19-inch equipment rack. Ensure adequate airflow around the unit to prevent overheating.
2.2 Painel frontal acimaview
- Interruptor de alimentação: Transforma o amplificador LIGADO/DESLIGADO.
- Channel Gain Controls: Adjust the input sensitivity for each of the four channels.
- LEDs de sinalização: Indicate the presence of an input signal.
- LEDs de clipe: Illuminate when the output signal is clipping, indicating potential distortion. Reduce the input level if these LEDs light up frequently.
- LEDs de energia: Indicate the operational status of each channel.
2.3 Painel Traseiro Sobreview e conexões
- Inputs (CH A, CH B, CH C, CH D): XLR and 1/4-inch TRS combo jacks for connecting audio sources.
- Outputs (CH A, CH B, CH C, CH D): Speakon connectors for connecting speakers.
- Chaves de modo: Select between Stereo, Parallel, or Bridged operation for each pair of channels (A/B and C/D).
- Interruptores cruzados: Select between Full Range, Low-Cut (for subwoofers), or High-Cut (for top speakers) for each pair of channels.
- Entrada de energia: Standard IEC power connector.
- Disjuntor: Provides overload protection.
2.4 Connecting Audio Sources and Speakers
Garantir o amplifier is turned OFF before making any connections.
- Conexões de entrada: Conecte sua fonte de áudio (mixer, pré-amplificador)amplifier, etc.) to the XLR or 1/4-inch TRS combo inputs on the rear panel. Use balanced cables for optimal noise rejection.
- Conexões do alto-falante: Connect your passive speakers to the Speakon outputs. Ensure correct polarity (+ to + and - to -).
- Seleção de modo: Use the mode switches to select the desired operation:
- Stereo: Each channel operates independently, driving a separate speaker.
- Paralelo: Input signal from Channel A is sent to both Channel A and Channel B outputs (and similarly for C/D), allowing both channels to drive speakers with the same mono signal.
- Ponte: Combines the power of two channels (A+B or C+D) to drive a single, higher-power speaker (typically a subwoofer). Ensure the speaker impedance is compatible with bridged mode (usually 4 or 8 Ohms).
- Configurações de cruzamento: Use the crossover switches to optimize the frequency response for your speakers:
- Gama completa: Sends the full audio spectrum to the speakers.
- Corte baixo: Filters out low frequencies, ideal for top speakers when used with subwoofers.
- Corte alto: Filters out high frequencies, ideal for subwoofers.
2.5 Setup Demonstration Videos
Video 1: General setup guide for Rockville RPA series amplifiers. While a different model, the connection principles for mixers and speakers are similar and can provide helpful visual guidance.
Video 2: Setup instructions for Rockville D Series Amplifiers. This video demonstrates various connection types and modes that are applicable to the Behringer NU4-6000.
3. Instruções de operação
3.1 Powering On and Initial Level Setting
- Ensure all gain controls on the amplifier are set to their minimum position.
- Turn on your audio source equipment first.
- Flip the Power Switch on the Behringer NU4-6000 to the ON position. The Power LEDs should illuminate.
- Slowly increase the gain controls for each channel until the desired volume is reached. Monitor the Signal and Clip LEDs to avoid distortion.
3.2 Understanding "Zero-Attack" Limiters
The "Zero-Attack" limiters are designed to provide maximum output level with reliable overload protection. They automatically detect when the signal is approaching clipping and dynamically reduce the gain to prevent distortion and protect your speakers.
3.3 Class-D Technology and Switch-Mode Power Supply
The NU4-6000 utilizes revolutionary High-Density Class-D amplifier technology, which ensures cool-running operation with "near-zero" thermal buildup. Coupled with an ultra-efficient switch-mode power supply, the amplifier delivers noise-free audio, superior transient response, and low power consumption, making it ideal for extended use.
3.4 Produto Acimaview Vídeo
Video 3: Product video for Rockville D Series Amps. This video provides a general overview of amplifier features and operation, which can be helpful for understanding the NU4-6000's functionalities.
4. Manutenção
To ensure the longevity and optimal performance of your Behringer NU4-6000 ampAmplificador, siga estas orientações de manutenção:
- Limpeza: Limpe regularmente o exterior do amplifier with a soft, dry cloth. Avoid using abrasive cleaners or solvents. Ensure ventilation grilles are free from dust and debris to maintain proper airflow.
- Ventilação: Sempre opere o amplifier in a well-ventilated environment. Do not block the ventilation openings. Overheating can severely damage the unit.
- Cabo de alimentação: Inspect the power cord periodically for any damage. Replace immediately if frayed or broken.
- Armazenar: Quando não estiver em uso por longos períodos, guarde o ampColoque o amplificador em local fresco e seco, longe da luz solar direta e de temperaturas extremas.
5. Solução De Problemas
If you encounter issues with your Behringer NU4-6000, refer to the following common troubleshooting steps:
- Sem energia:
- Verifique se o cabo de alimentação está firmemente conectado a ambas as tomadas. ampAmplificador e uma tomada elétrica em funcionamento.
- Verifique se a tomada elétrica está ativa.
- Check the circuit breaker on the rear panel; reset if tripped.
- Sem som:
- Ensure all audio input and speaker output cables are correctly and securely connected.
- Verify that the input source is active and sending a signal.
- Check the gain controls on the amplifier; ensure they are not set to minimum.
- Confirm that the correct mode (Stereo, Parallel, Bridged) is selected for your setup.
- Distorted Sound / Clip LED On:
- Reduce the input gain on the amplifier or the output level from your audio source.
- Ensure your speakers are correctly matched to the amplifier's impedance and power output.
- Superaquecimento:
- Garantir o amplifier has adequate ventilation and that no vents are blocked.
- Check speaker impedance; operating with too low an impedance can cause overheating.
- Reduce the overall volume or continuous high-power operation.
If the problem persists after trying these steps, please contact Behringer customer support.
6. Especificações
| Especificação | Valor |
|---|---|
| Modelo | NU4-6000 |
| Potência de saída (2 Ohms) | 4 x 1600 watts |
| Potência de saída (4 Ohms) | 2 x 3000 watts |
| Amptipo mais vital | Classe D |
| Fonte de energia | Modo de comutação |
| Peso do item | 12.35 libras (5.6 kg) |
| Dimensões do produto | 19.02 x 12.91 x 3.5 polegadas (483 x 328 x 89 mm) |
| Crossover integrado | Yes (Low-Cut, High-Cut, Full Range) |
| Limitadores | "Zero-Attack" Limiters |
7. Garantia e Suporte
Os produtos Behringer são projetados para oferecer confiabilidade e desempenho. Para obter informações detalhadas sobre a garantia, consulte o certificado de garantia incluído com o produto ou visite o site oficial da Behringer. website. If you require technical support, service, or have any questions regarding your NU4-6000 amplifier, please contact Behringer customer support through their official channels.
