URMET Synthesi CCD + MHP 1T Video Module 1745/21 Instruction Manual

Introdução

This manual provides detailed instructions for the installation, operation, and maintenance of the URMET Synthesi CCD + MHP 1T Video Module, model 1745/21. This video module is designed for 4+N cable systems and features an integrated micro-HP amplifier, two call buttons, manual adjustment capabilities, and infrared illumination for enhanced visibility.

Produto acimaview

URMET Synthesi Video Module in original packaging

Figura 1: URMET Synthesi Video Module 1745/21 as supplied in its original packaging, showing the front panel design.

URMET Synthesi Video Module with included accessories and documentation

Figura 2: Contents of the URMET Synthesi Video Module package, including the module, wiring accessories, and instruction leaflets.

Configuração e instalação

The URMET Synthesi 1745/21 video module is designed for 5-wire installations without the need for a coaxial cable. Proper installation is crucial for optimal performance. It is recommended that installation be performed by a qualified technician.

Identificação de componentes

Frente view of URMET Synthesi Video Module showing camera, infrared LEDs, and call buttons

Figura 3: Front panel of the video module, highlighting the CCD camera lens, infrared illumination LEDs, microphone/speaker grille, and two call buttons.

Traseira view of URMET Synthesi Video Module showing wiring terminals and adjustment potentiometers

Figura 4: Traseira view of the video module, displaying the terminal block for wiring connections and potentiometers for manual adjustments (e.g., audio levels, camera focus).

Instruções de fiação

Connect the module using a 4+N cable system. Refer to the detailed wiring diagram provided in the separate installation guide (typically included with the product or available from URMET). Ensure all connections are secure and correctly polarized. The module integrates a micro-HP amplifier, simplifying audio connections.

Montagem

Mount the module securely in the designated Synthesi frame. Ensure it is protected from direct weather exposure if installed outdoors, or use an appropriate weather-resistant housing.

Instruções de operação

The URMET Synthesi 1745/21 video module provides visual and audio communication for your intercom system.

Fazendo uma chamada

Press one of the two call buttons on the front panel (refer to Figure 3) to initiate a call to the corresponding indoor unit. The integrated micro-HP amplifier ensures clear audio transmission.

Video and Audio Communication

Once a call is established, the CCD camera provides video feed to the indoor monitor. The integrated microphone and speaker facilitate two-way audio communication. Infrared illumination automatically activates in low-light conditions to ensure clear video even at night.

Ajustes

The module features manual adjustment options, typically accessible via potentiometers on the rear (refer to Figure 4). These adjustments may include camera focus, video brightness, and audio volume levels. Consult the detailed wiring and adjustment guide for specific procedures.

Manutenção

Regular maintenance ensures the longevity and optimal performance of your URMET Synthesi video module.

Limpeza

Gently wipe the front panel, especially the camera lens and infrared LEDs, with a soft, damp pano.
Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the surface or optical components.
Ensure no moisture enters the module's internal components.

Inspeções

Verifique periodicamente se todas as conexões da fiação estão bem apertadas e se há sinais de corrosão.
Ensure the module is securely mounted and that its housing is intact.

Solução de problemas

If you encounter issues with your URMET Synthesi video module, refer to the following common problems and solutions:

Problema	Possível causa	Solução
Sem vídeo no monitor interno	Loose video wiring connection. Fonte de alimentação insuficiente. Camera fault.	Check all video signal wires for secure connections. Verify power supply to the module and system. Contact URMET support if wiring and power are confirmed good.
Sem áudio ou com má qualidade de áudio.	Loose audio wiring connection. Microphone or speaker obstruction. Audio level adjustment.	Check audio wiring. Ensure microphone and speaker grilles are clear of debris. Adjust audio potentiometers on the rear of the module (Figure 4).
Os botões de chamada não respondem.	Incorrect wiring for call buttons. Botão com defeito.	Verify call button wiring according to the installation diagram. If wiring is correct, the button may require replacement.
Má qualidade de imagem à noite.	Infrared LEDs obstructed or faulty. Lente da câmera suja.	Limpe a lente da câmera e os LEDs infravermelhos. Ensure no physical obstructions are blocking the LEDs.

For issues not listed here or if troubleshooting steps do not resolve the problem, please contact URMET technical support.

Especificações

Recurso	Detalhe
Fabricante	URMET
Número da peça	1745/21
Dimensões do produto	0.03 x 0.03 x 0.03 cm; 9.07 g
ASIN	B00LPDRU7M
Pilhas necessárias	Não
Primeira data disponível	21 de fevereiro de 2020
Compatibilidade do sistema	4+N Cable System, 5-wire installation (no coaxial cable)
Características	Integrated micro-HP amplifier, 2 call buttons, manual adjustment, infrared illumination

Garantia e Suporte

For warranty information, please refer to the documentation provided with your purchase or contact URMET directly. URMET provides technical support for their products.

For technical assistance, spare parts, or further inquiries, please visit the official URMET website or contact their customer service department. Ensure you have your product model number (1745/21) and purchase details available when seeking support.

	Urmet Signo 1740: Guia de instalação do monitor de vídeo porteiro de 4" Este guia fornece instruções de instalação para o Urmet Signo 1740, um monitor de vídeo porteiro de 4". Ele detalha como substituir modelos Urmet mais antigos e descreve os requisitos necessários do sistema, incluindo o uso de uma câmera CCD e uma fonte de alimentação com relé para fechaduras elétricas.
	Installationshandbuch für URMET Namensverzeichnismodul Mod. 1168/51 Umfassendes Installationshandbuch für das URMET Namensverzeichnismodul (Modell 1168/51 und 1168/51G) für Alpha-Rufmodule. Enthält technische Spezifikationen, Anschlussdiagramme und Wartungshinweise.
	ZJEDNODUŠENÝ NÁVOD: ZAPOJENÍ SYSTÉMU URMET 1736 Zjednodušený návod pro zapojení e konfiguraci systémů videovrátných e audio vrátných URMET řady 1736. Obsahuje základní schéma zapojení soparavy 1736/501, paralelní zapojení vice videotelefonů a příklad rozšíření systému s vice tlačítky a byty. Você pode obter informações ou configurar o DIP para configurar a configuração.
	Guia rápido de comandos por gestos do videoporteiro Urmet de 7 polegadas Guia rápido para usar comandos por gestos no Videoporteiro Urmet de 7" (Série 1760). Aprenda a controlar funções como atender chamadas, abrir portas e encerrar chamadas usando gestos sem toque.
	Sistema de vídeo porteiro Urmet 1744/501 com dois fios e monitor de 7 polegadas - Guia de Instalação Guia de instalação detalhado para o sistema de vídeo porteiro de dois fios Urmet 1744/501. Inclui descrição dos componentes, instruções de montagem, diagramas de fiação, especificações técnicas e funções do sistema para o monitor de 7 polegadas e o painel de chamada externo.
	Manual do Sistema Urmet 2Voice: Instalação e Operação Guia completo do sistema de videoporteiro Urmet 2Voice, cobrindo instalação, configuração, características e funcionamento. Aprenda a configurar e gerenciar o sistema de comunicação do seu edifício.

URMET 1745/21