Introdução
The TC Electronic T2 Reverb effects pedal provides a diverse range of reverb effects for guitar and other instruments. This manual details the pedal's features, setup procedures, operational guidelines, maintenance tips, troubleshooting steps, and technical specifications to ensure optimal performance.
Produto acimaview
The T2 Reverb pedal features intuitive controls for shaping your sound and a robust design for reliable use. Familiarize yourself with the pedal's components:
- Botão DECay: Controls the length of the reverb tail.
- Botão TONE: Adjusts the brightness or darkness of the reverb.
- Botão MIX: Balances the ratio between the dry (unaffected) signal and the wet (effected) signal.
- Reverb Type Selector: A rotary switch to select from various reverb algorithms (I-VIII, E1, E2, TP).
- Pedal: Envolve ou ignora o efeito.
- Tomadas de entrada / saída: For connecting your instrument and ampmais vivo.
- Entrada de energia: For connecting a 9V DC power supply.
Configurar
- Conexão de energia: Connect a 9V DC power adapter (center negative, not included) to the power input jack. Alternatively, the pedal can be powered by a 9V battery (not included) by opening the battery compartment.
- Conexão do instrumento: Connect your instrument (e.g., guitar) to the input jack on the right side of the pedal using a standard 1/4-inch instrument cable.
- AmpConexão do liffer: Conecte o conector de saída no lado esquerdo do pedal ao seu amplifier's input using a standard 1/4-inch instrument cable.
- Stereo Operation (Optional): For stereo output, connect the second output jack to a second ampAmplificador ou dispositivo de entrada estéreo.
Certifique-se de que todas as conexões estejam seguras antes de ligar o seu amplifier and pedal.
Instruções de operação
Operação básica
- Ligar: Once connected, press the footswitch to engage the effect. The LED indicator will illuminate. Press again to bypass the effect.
- Selecting Reverb Type: Rotate the Reverb Type Selector knob to choose from the available reverb algorithms (I through VIII, E1, E2). Each setting offers a distinct reverb character.
- Adjusting Reverb Parameters:
- Use o DECADÊNCIA knob to control the duration of the reverb.
- Use o TOM knob to adjust the frequency content of the reverb, making it brighter or darker.
- Use o MISTURA knob to blend the dry signal with the reverb effect. A higher setting increases the effect's prominence.
TonePrint Feature
The "TP" setting on the Reverb Type Selector activates the TonePrint feature. TonePrint allows you to upload custom-tuned reverb sounds created by artists or design your own using the TC Electronic TonePrint app. Connect your pedal to a computer via USB (cable not included) or beam TonePrints wirelessly from your smartphone to the pedal's pickup.
Manutenção
- Limpeza: Use um pano macio e seco para limpar a parte externa do pedal. Evite produtos de limpeza abrasivos ou solventes.
- Substituição da bateria: If using battery power, replace the 9V battery when the LED indicator dims or the effect performance degrades. To replace, open the battery compartment on the underside of the pedal.
- Armazenar: Store the pedal in a dry environment, away from extreme temperatures and direct sunlight, when not in use. Disconnect power and remove the battery if storing for extended periods.
Solução de problemas
| Problema | Possível causa | Solução |
|---|---|---|
| Sem som ou sinal fraco | Incorrect cable connections, dead battery, faulty power supply, volume knobs on instrument/amp recusado. | Check all cable connections. Replace battery or verify power supply. Ensure instrument and amplifier volumes are set appropriately. |
| Ruído ou zumbido indesejado | Ground loop, faulty cables, interference from other electronics, improper power supply. | Use shielded cables. Try a different power outlet or isolated power supply. Move pedal away from other electronic devices. |
| Effect not engaging (LED off) | No power, faulty footswitch. | Verify power connection and battery status. If problem persists, contact support. |
| TonePrint not loading | Incorrect app usage, connection issues. | Ensure the TonePrint app is updated and the pedal is correctly connected (USB or beaming). Refer to the TonePrint app's instructions for detailed guidance. |
Especificações
- Modelo: T2
- Peso do item: 1 pound (approximately 454 grams)
- Dimensões do produto: 4.61 x 2.48 x 2.91 polegadas (11.7 x 6.3 x 7.4 cm)
- Fonte de energia: Adaptador de energia de 9 V CC (centro negativo) ou bateria de 9 V
- Volumetage: 9 Volts
- Formato do sinal: Analógico
- Interface de hardware: HP-HSC
Garantia e Suporte
TC Electronic products are covered by a limited warranty. For detailed warranty information, product support, or service inquiries, please visit the official TC Electronic webou entre em contato diretamente com o suporte ao cliente. Guarde o comprovante de compra para eventuais solicitações de garantia.
Oficial Website: www.tceletronic.com