Manual do Usuário da Interface HMI Gráfica Weintek MT8100iE de 10.2"

1. Introdução

The Weintek MT8100iE is a 10.2-inch Human Machine Interface (HMI) designed for industrial automation applications. It features an 800 x 480 TFT industrial-grade LCD and is built to fully support major PLCs such as Rockwell, Siemens, Mitsubishi, and Omron. This manual provides essential information for the proper installation, operation, and maintenance of your MT8100iE HMI.

2. Informações de segurança

Please read and understand all safety instructions before operating the device. Failure to comply may result in injury or damage to the equipment.

• Certifique-se de que a fonte de alimentação esteja desconectada antes de realizar qualquer instalação ou manutenção.
• Somente pessoal qualificado deve instalar e realizar manutenção neste equipamento.
• Do not expose the device to excessive moisture, dust, or extreme temperatures.
• Verify correct wiring and connections to prevent electrical hazards.
• The front panel is NEMA4/IP65 compliant, but ensure proper sealing during installation to maintain this rating.

3. Conteúdo da embalagem

Verifique se todos os itens estão presentes na embalagem:

• MT8100iE HMI Unit
• Suportes de montagem (4x)
• Conector de energia
• Manual do usuário (este documento)
• CD-ROM with EasyBuilder Pro Software (or download link)

4. Produto acabadoview

Familiarize yourself with the components and interfaces of the MT8100iE HMI.

4.1 frente View

Figura 4.1: Frente view of the MT8100iE HMI, showing the 10.2-inch TFT LCD touchscreen and the power indicator LED at the top left.

4.2 Lado View

Figura 4.2: Lado profile of the MT8100iE, illustrating its compact form factor suitable for panel mounting.

4.3 Traseira View

Figura 4.3: Traseira view of the MT8100iE, highlighting the mounting holes for panel installation, the fuse holder for power protection, and the system reset button.

4.4 Portas de Comunicação

Figura 4.4: parte inferior view of the MT8100iE, detailing the various communication ports including USB, Ethernet, COM1 (RS-232), and COM2 (RS-485 2W/4W).

5. Configuração

5.1 Montagem em Painel

1. Cut an opening in the control panel according to the dimensions provided in the installation guide (refer to the separate installation template for precise measurements).
2. Insert the MT8100iE HMI into the cutout from the front.
3. From the rear of the panel, insert the four mounting brackets into the slots on the HMI unit.
4. Tighten the screws on the mounting brackets evenly until the HMI is securely fastened to the panel. Do not overtighten.

5.2 Conexão de Energia

• Connect a 24V DC power supply to the power input terminal block on the rear of the HMI.
• Certifique-se da polaridade correta (+ e -).
• Secure the connection firmly.

5.3 Conexões de Comunicação

• Portas seriais: Use the COM1 (RS-232) and COM2 (RS-485 2W/4W) ports to connect to PLCs or other serial devices. Refer to your PLC's documentation for specific wiring diagrams.
• Conexão de Rede: Connect an Ethernet cable to the RJ45 port for network communication with PLCs or for remote access.
• Portas USB: Use the USB host ports for connecting USB flash drives for project transfers or other peripherals.

6. Instruções de operação

6.1 Ligando

Once all connections are secure, apply power to the HMI. The power indicator LED will illuminate, and the HMI will boot up, displaying the configured project.

6.2 Project Download

To load a new project or update an existing one:

1. Create or modify your HMI project using the EasyBuilder Pro software on a PC.
2. Connect the PC to the HMI via Ethernet or USB.
3. In EasyBuilder Pro, use the 'Download' function to transfer the project to the HMI.
4. The HMI will restart with the new project loaded.

6.3 Operação com tela sensível ao toque

The MT8100iE features a resistive touchscreen. Use your finger or a non-sharp stylus to interact with the on-screen elements such as buttons, input fields, and displays.

6.4 PLC Communication

The HMI is designed to communicate with various PLCs. Ensure the communication settings (protocol, baud rate, station ID, etc.) configured in your EasyBuilder Pro project match those of your connected PLC.

7. Manutenção

Regular maintenance ensures optimal performance and longevity of your HMI.

• Limpeza: Use um pano macio e macioamp pano para limpar a tela e casing. Do not use abrasive cleaners or solvents. Ensure no liquid enters the device.
• Atualizações de firmware: Periodically check the Weintek website for firmware updates to ensure your HMI has the latest features and bug fixes.
• Substituição de fusíveis: If the HMI does not power on, check the fuse located on the rear panel. Replace it with a fuse of the same type and rating if necessary. Always disconnect power before replacing the fuse.
• Condições ambientais: Assegure-se de que o ambiente operacional permaneça dentro das faixas de temperatura e umidade especificadas para evitar danos.

8. Solução De Problemas

Esta seção fornece soluções para problemas comuns que você pode encontrar.

9. Especificações

10. Garantia e Suporte

Weintek products are manufactured to high quality standards. For warranty information and technical support, please refer to the official Weintek webou entre em contato com seu distribuidor autorizado. Guarde o comprovante de compra como prova para eventuais solicitações de garantia.

For software downloads, drivers, and additional resources, visit the official Weintek support portal.