Delta Ashlyn Single Handle Bathroom Faucet

Introdução

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Delta Ashlyn Single Handle Bathroom Faucet. Designed with sleek, angular lines and soft edges, this faucet offers a modern aesthetic for your bathroom. It features Delta's DIAMOND Seal Technology for lasting performance and InnoFlex PEX supply lines for easy installation.

Image: Delta Ashlyn Single Handle Bathroom Faucet in Stainless finish, showcasinseu design moderno.

Principais características:

• DIAMOND Seal Technology: Reduces leak points and lasts twice as long as the industry standard.
• Integrated InnoFlex PEX Supply Lines: Included for simplified installation and reduced leak potential.
• WaterSense Labeled: Uses at least 20% less water than the industry standard.
• Garantia vitalícia limitada: Backed by Delta Faucet's comprehensive warranty.
• Fácil instalação: Designed for single-hole or 3-hole, 4-inch configurations with an optional deck plate.

Produto acimaview Vídeo:

Informações importantes de segurança

• Always turn off the water supply to the faucet before beginning any work.
• Use óculos de segurança durante a instalação para proteger seus olhos.
• Certifique-se de que todas as conexões estejam seguras para evitar vazamentos.
• Se tiver dúvidas sobre qualquer etapa, consulte um encanador qualificado.
• Mantenha as peças pequenas longe das crianças.

Conteúdo da embalagem

Verifique se todos os componentes estão presentes antes de iniciar a instalação:

• Delta Ashlyn Single Handle Bathroom Faucet
• Integrated InnoFlex PEX Supply Lines
• Placa de fixação opcional (para instalações com 3 furos)
• Coordinating Metal Pop-Up Drain Assembly
• Mounting Hardware (nuts, washers, bracket)
• Chave Aeradora

Ferramentas e materiais necessários

The following tools and materials are recommended for installation:

• Adjustable Wrench (2 recommended)
• Óculos de segurança
• Toalha ou pano
• Balde (para recolher água)
• Flashlight (for under-sink visibility)
• Plumber's Tape (if replacing drain)
• Silicone Sealant (for uneven sink surfaces)

Instruções de instalação

1. Prepare-se para a instalação

1. Feche o registro de água da pia.
2. Libere a área embaixo da pia para ter acesso.
3. Remove your old faucet and clean the sink surface.

2. Mount the Faucet

1. Se a sua pia tiver três furos, coloque a placa de acabamento opcional sobre os furos. Certifique-se de que a junta esteja devidamente encaixada.
2. Feed the integrated supply lines and mounting stud of the faucet through the center hole of the sink.
3. Position the faucet squarely on the sink or deck plate.
4. From underneath the sink, secure the faucet using the provided mounting bracket and nut. Hand-tighten first, then use an adjustable wrench for final tightening, ensuring the faucet remains straight.

Image: Diagram illustrating faucet dimensions and installation options for 1-hole or 3-hole sinks, including the optional deck plate.

3. Connect Supply Lines

1. Connect the integrated InnoFlex PEX supply lines to your hot and cold water supply valves. The lines are color-coded (red for hot, blue for cold).
2. Hand-tighten the connections, then use an adjustable wrench for a final quarter-turn to ensure a secure, leak-free seal. Do not overtighten.
3. If the supply lines are too long, they can be spiraled to manage excess length, ensuring no kinks.

Image: Close-up of InnoFlex PEX supply lines, highlighting their flexibility and integrated design.

4. Install Drain Assembly

1. Follow the instructions provided with the coordinating metal pop-up drain assembly for proper installation into your sink.
2. Ensure all seals are correctly placed and connections are tightened to prevent leaks.

5. Flush the Faucet

1. Before turning on the water fully, remove the aerator from the faucet spout using the provided aerator wrench.
2. Abra lentamente as válvulas de abastecimento de água quente e fria.
3. Run water through the faucet for approximately 30 seconds to flush out any debris that may have entered the lines during installation.
4. Turn off the water, re-install the aerator, and check all connections for leaks.

Operando sua torneira

The Delta Ashlyn faucet features a single handle for easy control of water flow and temperature.

• Para ligar/desligar: Levante a alavanca para abrir a torneira. Empurre a alavanca para fechar a torneira.
• To Adjust Water Temperature: Move the handle to the left for hotter water and to the right for colder water.
• To Adjust Water Flow: Quanto mais a alavanca for levantada, maior será o fluxo de água.

Cuidados e Manutenção

Proper care will ensure the longevity and appearance of your Delta faucet.

• Limpeza: Clean your faucet regularly with a soft, damp cloth. Avoid abrasive cleaners, harsh chemicals, or polishes as they can damage the finish.
• Limpeza do Aerador: If water flow decreases, the aerator may be clogged. Remove it using the provided wrench, rinse away any debris, and re-install.
• DIAMOND Seal Technology: This faucet features a diamond-embedded ceramic disc valve that requires no lubrication and eliminates wear on seals, ensuring leak-free operation for life.

Imagem: Explodida view diagram illustrating the internal components of the Delta Diamond Seal Technology, emphasizing its durability and leak-free design.

Guia de solução de problemas

Especificações do produto

Garantia e Suporte ao Cliente

Your Delta Ashlyn Faucet is backed by a Garantia vitalícia limitada. This warranty covers defects in material and workmanship for as long as the original consumer purchaser owns the home in which the faucet was first installed.

For questions, assistance, or to make a warranty claim, please contact Delta Customer Service:

1-800-345-DELTA (3358)

For more information, visit the official Delta Faucet website.

Image: Icon representing the Lifetime Limited Warranty provided by Delta.