AMS F5962

AMS F5962 Radio-Controlled Wall Clock User Manual

Modelo: F5962

1. Introdução

Thank you for choosing the AMS F5962 Radio-Controlled Wall Clock. This manual provides essential information for the proper setup, operation, and maintenance of your new clock. Please read these instructions carefully before use and retain them for future reference.

2. Produto acabadoview

The AMS F5962 is a radio-controlled wall clock featuring an antique-style beige dial with dark brown Arabic numerals. Its painted metal housing ensures durability, and the radio-controlled movement provides accurate timekeeping by automatically synchronizing with a time signal.

AMS F5962 Radio-Controlled Wall Clock front view

Figura 1: Frente view of the AMS F5962 Radio-Controlled Wall Clock, showcasing its antique-style beige dial and dark brown Arabic numerals.

3. Conteúdo da embalagem

Por favor, verifique o conteúdo da embalagem ao desembalar. Certifique-se de que todos os itens estejam presentes e sem danos.

4. Configuração

4.1 Instalação da bateria

  1. Localize o compartimento da bateria na parte traseira do relógio.
  2. Insert one AA (or specified type) battery, ensuring the correct polarity (+/-) as indicated inside the compartment.
  3. Feche bem a tampa do compartimento da bateria.

Importante: Use only the recommended battery type. Remove depleted batteries promptly to prevent leakage.

4.2 Initial Time Synchronization

After battery installation, the clock will automatically attempt to receive the radio time signal.

  1. Place the clock near a window or in an open area, away from electronic devices that may cause interference.
  2. The hands will typically move to the 12 o'clock position and then begin searching for the signal.
  3. This process can take several minutes to several hours, depending on signal strength and location. Once the signal is received, the clock will automatically set itself to the correct time.

Observação: If the clock does not set itself after a few hours, try repositioning it or manually initiating a signal search if your model has that feature (refer to troubleshooting).

4.3 Montagem do Relógio

The AMS F5962 is designed for indoor wall mounting.

  1. Choose a suitable location on an indoor wall, ensuring it is sturdy enough to support the clock's weight (approximately 1.22 kg).
  2. Install a nail or wall anchor with a screw, ensuring it protrudes sufficiently (at least 2 cm) to securely hold the clock.
  3. Hang the clock using the hanging mechanism on the back.
AMS F5962 Wall Clock with dimensions

Figure 2: The AMS F5962 Wall Clock showing its approximate dimensions of 32cm diameter. The overall product dimensions are 35.4 x 35.2 x 7.4 cm.

5. Instruções de operação

Once set up, the AMS F5962 operates automatically.

6. Manutenção

6.1 Limpeza

To clean the clock, gently wipe the surface with a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the finish or internal components.

6.2 Substituição da bateria

Quando os ponteiros do relógio param de se mover ou a hora fica imprecisa, provavelmente é hora de trocar a bateria.

  1. Remova a bateria antiga do compartimento.
  2. Insert a new, fresh battery of the correct type (e.g., AA), observing polarity.
  3. The clock will then attempt to re-synchronize with the radio signal as described in Section 4.2.

Nota Ambiental: Please dispose of used batteries responsibly according to local regulations.

7. Solução De Problemas

ProblemaPossível causaSolução
Clock hands do not move or stop.Bateria descarregada.Substitua a bateria por uma nova.
Clock does not set to the correct time.
  • Weak or no radio signal.
  • Interferência de outros aparelhos eletrônicos.
  • Incorrect time zone setting (if applicable, though this model is typically automatic).
  • Move the clock to a different location, preferably near a window and away from electronic devices.
  • Allow several hours for the clock to receive the signal.
  • Certifique-se de que a bateria esteja nova.
Time is incorrect after DST change.Clock did not receive the DST signal.
  • The clock should automatically adjust. If not, try removing the battery for a few minutes and reinserting it to force a re-synchronization.
  • Ensure the clock is in a location with good signal reception.

8. Especificações

MarcaAMS
Número do modeloF5962
Tipo de exibiçãoAnálogo
Recurso especialRadio-Controlled Time Synchronization
MaterialMetal pintado
CorBeige (dial), Brown (housing)
EstiloAntigo
Dimensões do produto35.4 x 35.2 x 7.4 cm (Overall); Case diameter 32cm
Peso do item1.22 kg
Fonte de energiaAlimentado por bateria
Uso interno/externoInterior

9. Garantia e Suporte

For warranty information or technical support, please refer to the documentation provided with your purchase or contact your retailer. You may also visit the official AMS website para obter mais assistência.

Documentos relacionados - F5962

Préview Manual do Usuário do Relógio Radiocontrolado AMS 5898 / 5893
Instruções detalhadas para configurar e operar os relógios radiocontrolados AMS 5898 e AMS 5893, incluindo ajuste de hora, funções de alarme, exibição de temperatura e manutenção.
Préview Instruções de operação do relógio de parede AMS
Instruções de funcionamento para relógios de parede AMS, incluindo instalação e substituição de baterias, e uso geral em vários idiomas.
Préview Manual do Kit de Avaliação da Placa Adaptadora ams AS5600L
Este manual fornece informações completas sobre a placa adaptadora ams AS5600L-WL_EK_AB, incluindo conteúdo do kit, descrição da placa, instruções de montagem, detalhes de pinagem, operação no modo I2C, esquemas de hardware, layout da placa de circuito impresso e informações para pedidos.
Préview Manual do Usuário do Sensor de Posição Rotativa de 14 bits ams AS5048
Este manual do usuário fornece informações detalhadas sobre o ams AS5048, um sensor de posição rotativo de 14 bits com saída digital de ângulo e PWM. Ele abrange a placa adaptadora do AS5048, montagem, pinagem, casos de operação (SPI, Daisy Chain), codificação de firmware e exemplos.amples e esquemas de hardware. Essenciais para engenheiros que integram este sensor em seus sistemas.
Préview Manual do Kit de Avaliação da Placa Adaptadora ams AS5048
Este manual detalha a placa adaptadora ams AS5048 (AS5048-EK-AB), um kit de avaliação para o sensor de posição magnética AS5048. Ele abrange hardware, modos de operação (SPI, I2C), software e exemplos.amples e informações de contato da ams AG.
Préview AMS Clock Operating Instructions and Battery Replacement Guide
Instructions for operating and replacing the battery in AMS clocks, with multilingual guidance.