Smartbitt SBNB900LCD 900VA/450W Interactive UPS User Manual

1. Introdução

This manual provides essential information for the proper installation, operation, and maintenance of your Smartbitt SBNB900LCD Interactive Uninterruptible Power Supply (UPS). The SBNB900LCD is designed to protect your electronic equipment from power outagsim, voltage fluctuations, and power surges, ensuring continuous operation and data integrity. It features a 900VA/450W capacity, six NEMA 5-15R outlets with battery backup, surge suppression, and voltage regulation, along with an LCD display for easy monitoring and a USB port for advanced management.

2. Informações de segurança

Please read and follow all safety instructions carefully before installing or operating the UPS. Failure to comply with these instructions may result in electric shock, fire, or serious injury.

• This UPS contains hazardous materials (battery). Do not attempt to open or service the battery. Refer to qualified service personnel.
• Do not dispose of the UPS or its battery in fire. The battery may explode.
• Não abra a caixa da UPS.asing. Não existem peças internas que possam ser reparadas pelo usuário.
• Certifique-se de que o UPS esteja conectado a uma tomada CA aterrada.
• Do not block ventilation openings. The UPS requires adequate airflow to prevent overheating.
• Avoid installing the UPS in areas with excessive moisture, dust, or extreme temperatures.
• Disconnect the UPS from the power outlet before cleaning or performing any maintenance.
• The UPS is designed for indoor use only.

Aviso: This item contains a battery which is considered hazardous material. Hazardous materials such as flammable, pressurized, corrosive substances, etc., cannot be returned. If you receive a damaged product or have any issues, please contact customer service.

3. Conteúdo da embalagem

Verifique se todos os itens listados abaixo estão incluídos em seu pacote:

• Smartbitt SBNB900LCD UPS Unit
• Software CD (for monitoring)
• USB Cable (for monitoring)
• Manual do usuário (este documento)

4. Produto acabadoview

4.1 Painel Frontal

• Tela LCD: Provides real-time status information including input/output voltage, battery level, load capacity, and operating mode.
• Botão de energia: Utilizado para ligar ou desligar o UPS.

4.2 Painel traseiro

• NEMA 5-15R Outlets (x6): Provides battery backup, surge protection, and voltage regulation for connected devices.
• Porta USB: For connecting to a computer to use the monitoring software.
• RJ45 IN/OUT Ports: Provides surge protection for telephone/network lines.
• Cabo de entrada CA: Connects the UPS to the wall power outlet.
• Circuit Breaker/Reset Button: Protects against overload. Press to reset if tripped.

5. Configuração

1. Desembalagem: Carefully unpack the UPS and inspect it for any shipping damage. Keep the packaging materials for future transport or storage.
2. Colocação: Place the UPS in a clean, dry, and well-ventilated area, away from direct sunlight, heat sources, and excessive moisture. Ensure adequate space around the unit for proper airflow. The unit is designed for tower form factor and can be wall-mounted.
3. Carregamento inicial: Before initial use, connect the UPS to a standard wall outlet and allow it to charge for at least 8 hours. This ensures the battery is fully charged and ready to provide optimal backup time.
4. Equipamento de conexão:
   • Plug your critical electronic devices (e.g., computer, monitor, modem, router, small home office equipment) into the six NEMA 5-15R outlets on the rear panel. These outlets provide battery backup, surge protection, and voltage regulamento.
   • For telephone/network line protection, connect your incoming line to the "IN" RJ45 port and your device (e.g., modem) to the "OUT" RJ45 port.
5. Conexão USB (opcional): Connect the supplied USB cable from the UPS's USB port to an available USB port on your computer. Install the monitoring software from the included CD to enable advanced power management features and status monitoring.

6. Instruções de operação

1. Ligando o UPS: After initial charging, press and hold the power button on the front panel for approximately 2 seconds until you hear a beep and the LCD display illuminates.
2. Desligando o UPS: To turn off the UPS, press and hold the power button for approximately 2 seconds until you hear a beep and the LCD display turns off. Ensure all connected devices are properly shut down before turning off the UPS.
3. Tela LCD: The LCD display provides real-time information about the UPS status.
   • Vol de entradatage: Displays the incoming utility power voltage.
   • Volume de saídatage: Mostra o voltage supplied by the UPS to connected devices.
   • Nível da bateria: Indica o nível de carga atual da bateria interna.
   • Capacidade de carga: Mostra a porcentagemtage da capacidade do UPS sendo utilizada pelos dispositivos conectados.
   • Modo de operação: Indicates if the UPS is operating on AC power (AC Mode) or battery power (Batt. Mode).
4. Operação de backup de bateria: Em caso de falta de energiatage ou volume significativotage fluctuation, the UPS will automatically switch to battery power. An audible alarm will sound, and the LCD will indicate "Batt. Mode". This provides up to 40 minutes of backup power, depending on the connected load, allowing you to save work and safely shut down equipment.
5. Proteção contra sobrecarga: If the connected load exceeds the UPS's capacity (450W), an overload alarm will sound, and the UPS may shut down. Disconnect non-essential equipment and press the circuit breaker reset button on the rear panel if it has tripped.

7. Manutenção

• Cuidados com a bateria: The internal battery has a typical lifespan of 3-5 years. To maximize battery life, ensure the UPS is kept in a cool, dry environment and fully charged. Avoid frequent deep discharges.
• Substituição da bateria: Battery replacement should only be performed by qualified service personnel. Contact Smartbitt support for assistance.
• Limpeza: Disconnect the UPS from the power source before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid or aerosol cleaners.
• Armazenar: If storing the UPS for an extended period, ensure the battery is fully charged. Recharge the battery every 3 months to prevent permanent damage. Store in a cool, dry place.

8. Solução De Problemas

9. Especificações

10. Garantia e Suporte

For warranty information, technical support, or service inquiries, please refer to the official Smartbitt website ou entre em contato com o departamento de atendimento ao cliente.

• Official Datasheet: For detailed technical specifications, you can refer to the official product datasheet.

  

  Download Smartbitt SBNB900LCD Datasheet (PDF)

• Atendimento ao Cliente: Refer to the contact information provided with your product or on the Smartbitt official website para suporte.