Introdução
This manual provides essential instructions for the Generac 0J93230SSM Maintenance Kit, designed to facilitate routine upkeep for Generac 20kW to 22kW generators. Regular maintenance using genuine Generac parts is crucial for ensuring the longevity and reliable performance of your generator. This kit includes all necessary components for a standard service interval.
The kit contains genuine OEM Generac parts, specifically chosen to fit Generac engine models requiring this part number.
Componentes do kit acimaview
The Generac 0J93230SSM Maintenance Kit includes the following items:
- Two (2) Quarts of SAE 5W-30 Full Synthetic Engine Oil
- One (1) Air Filter
- One (1) Oil Filter (Part #: 070185E)
- Two (2) Spark Plugs
- One (1) Service Sticker
Procedimentos de manutenção
Regular maintenance is vital for the optimal performance and longevity of your Generac generator. Always refer to your generator's specific owner's manual for detailed safety precautions and procedures.
1. Troca de óleo do motor
The kit includes two quarts of SAE 5W-30 full synthetic engine oil. This oil is formulated for optimal performance in various temperatures.
- Certifique-se de que o gerador esteja desligado e resfriado.
- Locate the oil drain plug and place a suitable container underneath to collect used oil.
- Remove the drain plug and the oil fill cap/dipstick. Allow all old oil to drain completely.
- Recoloque o bujão de drenagem firmemente.
- Carefully pour the new SAE 5W-30 synthetic engine oil into the oil fill opening. Refer to your generator's manual for the exact oil capacity.
- Check the oil level with the dipstick, ensuring it is within the recommended range.
- Recoloque a tampa/vareta de enchimento de óleo.
2. Oil Filter Replacement
The kit includes one Generac oil filter (Part #: 070185E).
- After draining the old engine oil, locate the oil filter.
- Use an oil filter wrench to loosen and remove the old oil filter. Be prepared for some oil spillage.
- Apply a thin film of new engine oil to the rubber gasket of the new oil filter.
- Screw on the new oil filter by hand until the gasket makes contact with the engine block. Then, tighten an additional 1/2 to 3/4 turn. Do not overtighten.
- After refilling the engine oil, run the generator for a few minutes and check for leaks around the oil filter.
3. Substituição do filtro de ar
The kit includes one air filter. A clean air filter ensures proper engine breathing and prevents contaminants from entering the engine.
- Locate the air filter housing on your generator.
- Open the housing by releasing the clips or screws.
- Remove the old air filter. Note its orientation.
- Limpe qualquer detrito do interior da caixa do filtro de ar.
- Insert the new air filter, ensuring it is seated correctly.
- Feche e fixe bem a caixa do filtro de ar.
4. Substituição das velas de ignição
The kit includes two spark plugs. Replacing spark plugs ensures efficient ignition and optimal engine performance.
- Ensure the generator is off and cooled. Disconnect the spark plug wires.
- Use uma chave de vela para remover cuidadosamente as velas de ignição antigas.
- Inspect the new spark plugs for correct gap (refer to your generator's manual for specifications). Adjust if necessary.
- Enrosque as novas velas de ignição no cabeçote do cilindro manualmente para evitar que a rosca fique cruzada.
- Tighten with a spark plug wrench. Do not overtighten; typically, a quarter to half turn after hand-tight is sufficient.
- Reconnect the spark plug wires firmly.
5. Service Sticker
Use the included service sticker to record the date and hours of this maintenance service. This helps track future maintenance intervals.
Vídeos de produtos
Especificações
| Recurso | Detalhe |
|---|---|
| Marca | Gerar |
| Nome do modelo | 0J93230SSM |
| Recomendado para | Generac 20kW-22kW Generators |
| Componentes incluídos | 2 Quarts of 5W-30 Synthetic Motor Oil, 1 Air Filter, 1 Oil Filter, 2 Spark Plugs, 1 Service Sticker |
| Peso do item | 2.76 libras (aproximadamente) |
| Dimensões do produto | 27.94 x 27.94 x 27.94 inches (approx. package dimensions) |
| Material | Plastic (for some components) |
| Recurso especial | Maintenance kit, Tune up kit |
Garantia e Suporte
For specific warranty information regarding the Generac 0J93230SSM Maintenance Kit or its individual components, please refer to the documentation included with your purchase or visit the official Generac website.
For technical support, troubleshooting assistance, or to locate authorized service centers, please contact Generac customer service directly or consult your generator's owner's manual.
