Donner DP-1

Fonte de alimentação para guitarra Donner DP-1

Manual de instruções

1. Produto acabadoview

The Donner DP-1 Guitar Power Supply is designed to provide stable and clean power to your guitar effect pedals. It features 10 isolated DC outputs, ensuring optimal performance and minimizing unwanted noise in your signal chain. The robust aluminum alloy housing makes it durable and portable for various environments.

Donner DP-1 Guitar Power Supply with 10 independent interfaces

Figure 1: Donner DP-1 Guitar Power Supply with 10 independent power interfaces, highlighting low noise, stable output, and 10 outputs.

  • 10 Isolated Outputs: Provides dedicated power to each pedal, reducing interference.
  • Projeto de circuito de redução de ruído: Engineered to minimize noise for a cleaner audio signal.
  • Proteção contra curto-circuito: Each output is independently protected, ensuring other outputs continue to function if one experiences a short circuit.
  • Indicadores LED azuis: Bright blue LEDs indicate power status and short circuit conditions for each output.
  • Construção durável: Made of aluminum alloy for lightweight portability and robust protection.

2. Instruções de configuração

Follow these steps to set up your Donner DP-1 Guitar Power Supply:

  1. Connect the Main Power Adapter: Plug the included DC 18V power adapter into the 'DC IN 18V' input on the power supply unit. Connect the adapter to a standard AC power outlet (100V-240V).
  2. Identify Output Requirements: Determine o voltage (9V, 12V, or 18V) and current (mA) requirements for each of your guitar pedals. Refer to your pedal's manual or specifications.
  3. Connect Pedals to Outputs: Use the provided power cables to connect your pedals to the corresponding outputs on the DP-1 unit. The outputs are labeled as follows:
    • Outputs 1-7: DC 9V, 100mA
    • Output 8: DC 9V, 500mA
    • Output 9: DC 12V, 100mA
    • Output 10: DC 18V, 100mA

    Ensure the polarity of the power cable matches your pedal's requirements. A polarity reversal cable is included for pedals requiring center-positive polarity (standard is center-negative).

    Donner DP-1 Power Supply outputs labeled with voltage e atual

    Figura 2: Detalhado view of the Donner DP-1 outputs, showing different voltage and current specifications for connecting various pedals.

  4. Organizar cabos: Arrange the power cables neatly to prevent tangling and accidental disconnections.

Conteúdo da embalagem:

The Donner DP-1 Guitar Power Supply package includes:

  • DP-1 Guitar Pedal Power Supply Unit x 1
  • Adaptador de alimentação DC 18V x 1
  • DC Power Cables x 10
  • Polarity Reversal Cable x 2
  • Manual do usuário x 1
Donner DP-1 Power Supply package contents including unit, adapter, and cables

Figure 3: All items included in the Donner DP-1 Guitar Power Supply package.

3. Instruções de operação

Once connected, the Donner DP-1 is ready for use. The unit operates automatically when connected to power.

  • Ligar: The unit powers on automatically when the DC 18V adapter is plugged into a live AC outlet and connected to the DP-1.
  • Indicadores LED azuis: Each output features a bright blue LED. When a pedal is correctly connected and receiving power, its corresponding LED will illuminate.
  • Indicação de curto-circuito: In the event of a short circuit on an output, the corresponding blue LED will turn off, indicating a fault. The independent short-circuit protection ensures that other outputs remain operational.
  • Redução de ruído: The built-in noise reduction circuit helps maintain a clean audio signal, minimizing hum and interference.
Close-up of blue LED indicator lights on the Donner DP-1 Power Supply

Figure 4: Blue LED indicators on the Donner DP-1, showing power status for each output.

4. Manutenção

To ensure the longevity and optimal performance of your Donner DP-1 Guitar Power Supply, follow these simple maintenance guidelines:

  • Limpeza: Use a soft, dry cloth to wipe down the unit. Avoid using liquid cleaners or abrasive materials, as these can damage the finish or internal components.
  • Armazenar: When not in use for extended periods, store the power supply in a cool, dry place away from direct sunlight and extreme temperatures.
  • Cuidados com os cabos: Regularly inspect all power cables for any signs of wear, fraying, or damage. Replace damaged cables immediately to prevent electrical hazards or signal issues.
  • Ventilação: Ensure the unit has adequate ventilation to prevent overheating. Do not block the ventilation holes.

5. Solução De Problemas

If you encounter any issues with your Donner DP-1 Guitar Power Supply, refer to the following troubleshooting tips:

  • No Power to Unit:
    • Check if the DC 18V power adapter is securely plugged into both the DP-1 unit and a working AC outlet.
    • Verify that the AC outlet is live by plugging in another device.
  • No Power to a Specific Pedal (LED off):
    • The unlit blue LED indicates a short circuit or overload on that specific output.
    • Disconnect the pedal from the affected output. If the LED turns back on, the issue is with the pedal or its cable.
    • Check the power cable connecting the pedal to the DP-1 for damage or incorrect polarity.
    • Certifique-se de que o volume do pedal esteja correto.tage and current requirements do not exceed the output's specifications.
  • Ruído/zumbido excessivo:
    • While the DP-1 has noise reduction, ensure all cables are properly shielded and not running parallel to AC power cables.
    • Verify that all pedals are connected to outputs matching their voltage and current requirements. Mismatched power can sometimes introduce noise.
    • Test pedals individually to identify if a specific pedal is the source of the noise.

6. Especificações

RecursoEspecificação
Número do modeloAS2401A
EntradaCorrente contínua 18 V
Produto 1-7Corrente contínua 9 V, 100 mA
Saída 8Corrente contínua 9 V, 500 mA
Saída 9Corrente contínua 12 V, 100 mA
Saída 10Corrente contínua 18 V, 100 mA
Saída total Wattage9 Watts
Peso do item6.9 onças (196g)
Dimensões do produto6 x 2 x 72 polegadas (150 x 50 x 30 mm)
MaterialLiga de alumínio
CorPreto
Donner DP-1 Power Supply dimensions

Figure 5: Dimensions of the Donner DP-1 Guitar Power Supply.

7. Garantia e Suporte

Donner is committed to providing high-quality musical instruments and accessories. For detailed warranty information, including coverage and duration, please refer to the warranty card included with your product or visit the official Donner Music website.

For technical support, troubleshooting assistance, or any product-related inquiries, please contact Donner Music customer service through their official channels. Keep your purchase receipt as proof of purchase for warranty claims.

Política de devolução: This product is typically eligible for a 30-day free return. Please check the retailer's specific return policy at the time of purchase.

Documentos relacionados - DP-1

Préview Manual do Proprietário do Pedal de Efeitos para Guitarra Donner Revecho - Delay e Reverb
Manual do proprietário completo para o Donner Revecho EC1118, um pedal de efeitos duplo compacto para guitarra com efeitos versáteis de delay e reverb e função tap tempo.
Préview Manual do Proprietário do Pedal de Efeitos Donner Alpha Acoustic Mini -
Manual do proprietário do pedal Donner Alpha Acoustic Mini Effect Chain, detalhando suas características, especificações, conexões, controles e precauções de uso. Inclui informações sobre pré-amplificação.ampmódulos de chorus e reverb.
Préview Manual do Proprietário do Pedal de Efeito para Guitarra e Baixo Donner Alpha Bass EC1106
Manual do proprietário do pedal de efeitos compacto Donner Alpha Bass EC1106, detalhando suas características, especificações, conexões e controles para baixistas.
Préview Pedal de efeito Donner Harmonic Square para guitarra - Manual do proprietário
Manual do proprietário do pedal de delay compacto e pitch shift multimodo Donner Harmonic Square. Saiba mais sobre seus recursos, especificações, precauções e controles.
Préview Pedal de efeito para guitarra Donner Fuzz Seeker Fuzz - Manual do Proprietário
Manual do proprietário oficial do Donner Fuzz Seeker, um pedal de efeito fuzz analógico compacto com oitava para guitarra e baixo. Saiba mais sobre seus recursos, controles, especificações e precauções.
Préview Manual do Usuário do Donner Pocket GO
Manual do usuário completo para o Donner Pocket GO, um processador de efeitos portátil e multifuncional para guitarra e baixo. Explore seus 21 presets editáveis, 6 módulos de efeitos, controle por software, conectividade Bluetooth e recursos de interface de áudio.