1. Introdução
This manual provides essential information for the proper installation, operation, and maintenance of your Datalogic QuickScan Lite QW2100 Bar Code Reader. The QW2100 is an entry-level linear imager designed for reading long, truncated 1D bar codes, commonly found in retail, light industrial, document processing, and office environments. Its ergonomic design ensures user comfort during daily operations.
Please read this manual thoroughly before using the device to ensure safe and efficient operation.
2. Informações de segurança
Observe as seguintes precauções de segurança para evitar ferimentos e danos ao dispositivo:
- Não exponha o dispositivo a temperaturas extremas, umidade ou luz solar direta.
- Avoid dropping the device or subjecting it to severe impacts.
- Não tente abrir ou modificar o dispositivo. Encaminhe todos os serviços de manutenção a pessoal qualificado.
- Mantenha a janela de digitalização limpa para garantir o desempenho ideal.
- Use only Datalogic-approved accessories and power supplies.
3. Conteúdo da embalagem
Verifique se todos os itens estão presentes na embalagem:
- Datalogic QuickScan Lite QW2100 Bar Code Reader
- USB Cable (if USB interface model) or RS-232/Keyboard Wedge Cable
- Quick Start Guide (refer to this manual for full instructions)
- Optional: Stand (if purchased as a kit)
4. Produto acabadoview
The Datalogic QuickScan Lite QW2100 features a compact and ergonomic design for comfortable handheld use. Key components include:
- Janela de digitalização: Emits the scan line and reads bar codes.
- Botão de gatilho: Activates the scanning process.
- LED indicador: Provides feedback on scanning status (e.g., successful read, error).
- Cable Connector Port: For connecting the interface cable.
5. Configuração
Follow these steps to set up your QW2100 Bar Code Reader:
- Conecte o Cabo: Insert the appropriate interface cable (USB or RS-232/Keyboard Wedge) into the connector port at the base of the scanner. Ensure a secure connection.
- Conectar ao dispositivo host:
- Interface USB: Plug the USB connector into an available USB port on your computer or POS system. The operating system should automatically detect and install the necessary drivers.
- RS-232/Keyboard Wedge Interface: Connect the cable to the corresponding port on your host device. Configuration may be required using Datalogic Aladdin software or by scanning configuration bar codes (refer to the full programming manual for details).
- Ligar: The scanner typically powers on automatically once connected to the host device. The indicator LED may illuminate to confirm power.
- Optional Stand Setup: If using the optional stand, assemble it according to its instructions and place the scanner in the stand for hands-free operation.
For advanced configuration, such as changing symbologies or interface settings, refer to the Datalogic Aladdin Configuration Software or the comprehensive programming manual.
6. Instruções de operação
To scan a bar code with your QW2100 reader:
- Mirar: Point the scanning window of the reader at the bar code you wish to scan.
- Ativar: Press and hold the trigger button. A bright scan line will project from the scanning window.
- Digitalizar: Position the scan line across the entire bar code. The QW2100 is designed for wide-angle scanning, making it effective for long or wide codes.
- Confirmação: Upon a successful read, the scanner will emit an audible beep (if enabled) and the indicator LED will flash. Release the trigger button.
For optimal performance, ensure the bar code is clean and not excessively creased or damaged. Adjust the distance between the scanner and the bar code for the best read.
7. Manutenção
Proper maintenance ensures the longevity and performance of your bar code reader:
- Limpando a janela de digitalização: Use um pano macio e sem fiapos dampened with a mild, non-abrasive cleaner (e.g., glass cleaner) to gently wipe the scanning window. Avoid harsh chemicals or abrasive materials that could scratch the surface.
- Limpando o Casing: Limpe a parte externa casing com um suave, damp pano.
- Inspeção de cabos: Regularly check the interface cable for any signs of damage, fraying, or loose connections. Replace damaged cables immediately.
- Armazenar: Quando não estiver em uso, guarde o scanner em um ambiente limpo e seco, longe da luz solar direta e de temperaturas extremas.
8. Solução De Problemas
| Problema | Possível causa | Solução |
|---|---|---|
| O scanner não liga. | Cable not connected properly or host device not providing power. | Ensure the cable is securely connected to both the scanner and the host device. Try a different USB port or host device. |
| Scanner does not read bar codes. |
|
|
| Scanner reads intermittently. | Damaged cable or loose connection. | Check the cable for damage and ensure connections are secure. Replace cable if necessary. |
9. Especificações
| Recurso | Detalhe |
|---|---|
| Número do modelo | QW2120-BK |
| Marca | Datalogic |
| Tecnologia de Conectividade | USB Cable (also available in RS-232/Keyboard Wedge) |
| Fonte de energia | AC (via host device USB or external power supply for RS-232) |
| Taxa de digitalização | 400 varreduras/segundo |
| Dimensões do produto (C x L x A) | 6.69 x 2.56 x 2.76 polegadas (17 x 6.5 x 7 cm) |
| Peso do item | 4.2 onças |
| Cor | Preto |
| Simbologias Suportadas | Most standard 1D bar codes (e.g., EAN/UPC, Code 39, Code 128, Interleaved 2 of 5, etc.) |
10. Garantia e Suporte
Datalogic products are designed and manufactured to the highest quality standards. For warranty information, please refer to the warranty card included with your product or visit the official Datalogic website.
For technical support, product registration, or to download the latest drivers and software (such as Datalogic Aladdin Configuration Software), please visit the Datalogic support portal or contact your local Datalogic representative.
Website: www.datalogic.com
