1. Produto acabadoview
The Skylink SKHU100 Net Internet Hub serves as the central control unit, or "brain," for your Home Alarm and Automation system. It connects to your home's router to coordinate the activities of all connected sensors and receivers. This hub features a built-in 110dB siren, a backup battery for uninterrupted operation during power outages, and a 4-button keypad for arming and disarming the alarm system.
Figura 1: The Skylink SKHU100 Net Internet Hub. This image displays the compact, white hub unit with its integrated 4-button keypad (labeled 1-4), a lock/unlock button, and status indicators for Wi-Fi and power. The central display area is visible above the keypad.
Principais características:
- Central control unit for the SkylinkNet Alarm System.
- Plug & Play installation for quick setup.
- Integrated 110-decibel siren for audible alerts.
- Supports various SkylinkNet sensors, cameras, and home control receivers.
- Equipped with a backup battery to ensure continuous operation during power outage.
2. Guia de configuração
Follow these steps to set up your Skylink SKHU100 Net Internet Hub.
2.1 Desembalagem e Inspeção Inicial
- Remova cuidadosamente todos os componentes da embalagem.
- Verify that all included components are present: the Internet Hub unit, power adapter, and backup battery.
- Inspect the hub and accessories for any signs of damage. If any damage is found, do not proceed with installation and contact customer support.
2.2 Connecting the Hub
- Connect one end of an Ethernet cable (not included) to the LAN port on the back of the Internet Hub.
- Connect the other end of the Ethernet cable to an available LAN port on your home's internet router.
- Insert the backup battery into the designated battery compartment on the hub. Ensure correct polarity.
- Connect the power adapter to the DC input port on the hub, then plug the adapter into a standard electrical outlet.
- Allow a few moments for the hub to power on and establish a network connection. The status indicators on the hub will illuminate to show connectivity.
2.3 Instalação e emparelhamento do aplicativo
- Download the "SkylinkNet" application from your smartphone's app store (available for iOS and Android).
- Open the app and follow the on-screen instructions to create a new account or log in to an existing one.
- Within the app, select the option to add a new device. The app will guide you through the process of pairing your Internet Hub. This typically involves scanning a QR code on the hub or entering a serial number.
- Once the hub is successfully paired, you can begin adding and configuring other SkylinkNet sensors and devices through the app.
3. Operando o Hub
The Skylink SKHU100 Net Internet Hub can be operated via its integrated keypad or through the SkylinkNet smartphone application.
3.1 Usando o Teclado
The 4-button keypad and the lock/unlock button provide direct control over the alarm system's arming status.
- Armando o sistema: Pressione o trancar button. The system will enter an armed state after a short delay.
- Desarmando o Sistema: Pressione o desbloquear button. The system will disarm.
- Custom Codes: You may configure custom arm/disarm codes using the 1-4 buttons through the SkylinkNet app. Refer to the app's settings for code management.
3.2 Using the SkylinkNet App
The smartphone app offers comprehensive control and monitoring capabilities.
- Armar/Desarmar: Control the alarm system's status remotely.
- Gerenciamento de dispositivos: Add, remove, and configure connected sensors and receivers.
- Notificações: Receive real-time alerts and status updates.
- Log de eventos: Review a history of system events.
- Configurações: Customize system settings, siren volume, entry/exit delays, and user permissions.
4. Manutenção
Regular maintenance ensures the optimal performance and longevity of your Skylink SKHU100 Net Internet Hub.
4.1 Limpeza
- Wipe the exterior of the hub with a soft, dry cloth.
- Do not use liquid cleaners, aerosols, or abrasive solvents, as these can damage the unit.
4.2 Substituição da bateria
The backup battery provides power during electrical outages. If the hub consistently loses power during outages despite being fully charged, or if the app indicates a low battery status for the hub, the backup battery may need replacement.
- Disconnect the power adapter from the hub and the wall outlet.
- Locate the battery compartment, typically on the back or bottom of the unit.
- Open the compartment and carefully remove the old battery. Note its orientation.
- Insert a new, compatible lead-acid battery (6 Volts, as per specifications) into the compartment, ensuring correct polarity.
- Close the battery compartment and reconnect the power adapter.
- Properly dispose of the old battery according to local regulations.
4.3 atualizações de firmware
Skylink may release firmware updates to improve performance, add features, or address security vulnerabilities. These updates are typically managed through the SkylinkNet app. Ensure your hub is connected to the internet and follow app prompts for any available updates.
5. Solução De Problemas
This section addresses common issues you might encounter with your Skylink SKHU100 Net Internet Hub.
| Problema | Possível causa | Solução |
|---|---|---|
| Hub not powering on. | Power adapter not connected or faulty; power outlet not active. | Ensure power adapter is securely connected to the hub and a working electrical outlet. Test the outlet with another device. |
| No internet connection (status light off/red). | Ethernet cable disconnected or faulty; router issue; incorrect network settings. | Check Ethernet cable connection to both hub and router. Restart your home router. Verify your internet service is active. |
| Cannot pair hub with SkylinkNet app. | Hub not connected to internet; incorrect pairing procedure; app version outdated. | Ensure hub has an active internet connection. Follow app pairing instructions carefully. Update the SkylinkNet app to the latest version. |
| Sirene não está ativando. | Siren disabled in settings; system not armed; faulty siren. | Check siren settings in the SkylinkNet app. Ensure the system is armed when testing. If issues persist, contact customer support. |
| Hub loses power during outage. | Backup battery depleted or faulty; battery not installed correctly. | Ensure the backup battery is properly installed. If the issue continues, the backup battery may need to be replaced. |
If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact Skylink customer support for further assistance.
6. Especificações
| Atributo | Detalhe |
|---|---|
| Marca | SKYLINK |
| Número do modelo | SKHU100 (also listed as Hu-100) |
| Fabricante | Skylink |
| Dimensões do produto | 11 x 11 x 9 cm |
| Peso do item | 260 g (0.26 quilogramas) |
| Cor | Branco |
| Fonte de energia | Alimentado por bateria (com adaptador CA) |
| Volumetage | 6 Volts |
| Método de instalação | Plug & Play |
| Nível sonoro (sirene) | 110 dB |
| Componentes incluídos | Internet Hub, Battery (backup), Power Adapter, Siren (built-in) |
| Pilhas necessárias? | Yes (for backup battery) |
| Tipo de célula da bateria | Chumbo ácido |
| Tecnologia de Conectividade | Sem fio, Ethernet |
| Dispositivos compatíveis | Smartphone (via SkylinkNet app) |
| Tipo de alerta | Apenas movimento |
7. Garantia e Suporte
For warranty information and technical support, please refer to the official Skylink webou entre em contato diretamente com o departamento de atendimento ao cliente. Guarde o comprovante de compra como prova para eventuais solicitações de garantia.
Skylink Customer Support:
- Visit the official Skylink webSite com perguntas frequentes, recursos de suporte e informações de contato.
- Contact details (phone, email) are typically available on the product packaging or the manufacturer's website.