Connects2 CTSFO003.2 Steering Wheel Control Interface Manual

1. Introdução

The Connects2 CTSFO003.2 is an interface designed to integrate an aftermarket car audio system with your vehicle's existing steering wheel controls. This device allows you to retain the functionality of your steering wheel buttons, such as volume control, track changes, and mode selection, when upgrading your car radio to a non-original equipment manufacturer (OEM) unit. This manual provides essential information for the correct installation and operation of the interface.

2. Compatibilidade do veículo

This interface is compatible with the following Ford vehicle models. Please ensure your vehicle is listed and falls within the specified year range. This unit is specifically for vehicles without 12V ignition power supplied directly on the vehicle's wiring harness.

Ford C-Max: 2003 - 2010
Ford Fiesta: 2005 - 2008
Ford Focus: 2004 - 2011
Ford Fusion: 2005 - 2012
Ford Galaxy: 2006 - 2014
Ford Mondeo: 2007 - 2014
Ford S-Max: 2006 - 2014
Ford Transit: 2006 - 2013
Ford Kuga: 2008 - 2012
Ford Transit Connect: 2004 - 2013

3. Conteúdo da embalagem

The Connects2 CTSFO003.2 package typically includes:

Connects2 CTSFO003.2 Interface Module
Chicote de fiação específico para o veículo
Universal Patch Lead (for connecting to aftermarket head unit)

Connects2 CTSFO003.2 Steering Wheel Control Interface module and wiring harness.

Image 1: Connects2 CTSFO003.2 interface module and associated wiring harness. This image displays the main components included in the package, showing the central module and the various connectors for vehicle and head unit integration.

4. Configuração e instalação

Importante: Installation should be performed by a qualified professional. Disconnect the vehicle's battery before beginning any electrical work to prevent short circuits or damage.

Preparar o veículo: Ensure the vehicle's ignition is off and disconnect the negative terminal of the vehicle battery.
Remove OEM Head Unit: Carefully remove the factory-installed car radio from the dashboard. Refer to your vehicle's service manual for specific instructions on trim panel and head unit removal.
Interface de conexão ao veículo: Connect the vehicle-specific wiring harness from the CTSFO003.2 kit to the corresponding connectors in your vehicle's dashboard. Ensure all connections are secure.
Interface de conexão com unidade principal de reposição: Connect the universal patch lead from the CTSFO003.2 interface module to the steering wheel control input (usually a 3.5mm jack or a specific wire labeled 'SWC' or 'Key1/Key2') on your aftermarket head unit. Then, connect the main harness from the CTSFO003.2 module to your aftermarket head unit's ISO connectors.
Conexão de energia (se aplicável): For vehicles without 12V ignition power on the harness, ensure the interface receives a switched 12V power supply from an alternative source (e.g., fuse box). Consult a wiring diagram or professional installer if unsure.
Módulo seguro: Once all connections are made, secure the CTSFO003.2 interface module in a safe location behind the dashboard, away from moving parts or heat sources.
Funcionalidade de teste: Reconnect the vehicle battery. Turn on the ignition and the aftermarket head unit. Test all steering wheel control buttons to ensure they function correctly with the new head unit.
Remontar: If all functions are confirmed, carefully reassemble the dashboard and secure the aftermarket head unit.

5. Instruções de operação

Once the Connects2 CTSFO003.2 interface is correctly installed and configured, it operates automatically. Your vehicle's steering wheel controls will now communicate with your aftermarket head unit. The specific functions available will depend on your vehicle's original steering wheel buttons and the capabilities of your aftermarket head unit.

Aumentar/diminuir volume: Ajusta o volume do áudio.
Faixa para cima/para baixo: Changes to the next or previous track/station.
Modo/Fonte: Switches between audio sources (e.g., Radio, USB, Bluetooth).
Mudo: Silencia a saída de áudio.

Refer to your aftermarket head unit's manual for instructions on how to program or assign steering wheel control functions, if necessary.

6. Manutenção

The Connects2 CTSFO003.2 interface is a sealed electronic unit and requires no routine maintenance. To ensure optimal performance and longevity:

Ensure the module is securely mounted and not exposed to excessive vibration.
Keep the module and its connections free from moisture and extreme temperatures.
Do not attempt to open or modify the interface module, as this will void any warranty.

7. Solução De Problemas

Problema	Possível causa	Solução
Os comandos do volante não funcionam.	Incorrect wiring connections. Aftermarket head unit not configured or incompatible.	Verifique se todas as conexões da fiação estão seguras e corretas, de acordo com o guia de instalação. Check your aftermarket head unit's manual for steering wheel control setup or programming instructions. Ensure the patch lead is correctly connected to the head unit's SWC input.
Alguns botões funcionam, outros não.	Limited compatibility with specific head unit models or vehicle functions.	Not all steering wheel buttons may be supported by every aftermarket head unit. Consult your head unit's manual. Ensure the head unit's firmware is up to date.
Delayed response from controls.	Compatibility issue between interface and head unit, or head unit processing speed.	This can sometimes occur. Ensure all connections are tight. Check for any available firmware updates for your aftermarket head unit.
No power to the head unit after installation.	Incorrect power connection, especially for vehicles without 12V ignition on harness. Blown fuse.	Verify the 12V ignition and constant power connections. Check vehicle fuses related to the radio and accessory power. Ensure the interface is receiving proper power.

8. Especificações

Fabricante: Conecta2
Modelo: CTSFO003.2
Peso do item: 140 g
Dimensões do produto (C x L x A): 30 x 25 x 5 cm
Material: Plástico
Tipo de conector: Fakra 40 pins

9. Garantia e Suporte

For information regarding the product warranty, please refer to the documentation provided at the time of purchase or contact your retailer directly. Keep your proof of purchase for any warranty claims.

For technical support or further assistance with installation and troubleshooting, please contact the manufacturer, Connects2, or your authorized dealer. Contact details can typically be found on the manufacturer's official website.

	Connects2 CTSFO023.2 Steering Wheel Control Interface for Ford Transit (2018+) Install the Connects2 CTSFO023.2 interface for Ford Transit (MK8/MK1 Facelift, 2018+) to retain steering wheel controls, add an ignition feed, and support voice assistant, speed pulse, park brake, and reverse gear outputs.
	Manual de Instalação do Controle Universal de Volante Connects2 UNI-SWC.4 Manual de instruções completo para o Connects2 UNI-SWC.4, detalhando a instalação, conexões de interface, configurações de dipswitches e informações de fiação específicas para veículos com CAN-Bus e analógicos.
	Connects2 CTKIZ04: Guia completo do kit de instalação para Isuzu D-Max Este guia fornece instruções passo a passo para instalar o kit Connects2 CTKIZ04 em veículos Isuzu D-Max (a partir de 2020). Ele detalha como instalar o painel frontal, conectar a fiação e manter a funcionalidade dos controles do volante ao instalar uma central multimídia de outra marca.
	Manual de Instruções da Interface de Controle do Volante Connects2 CTSNS017.2 Nissan Manual de instruções do Connects2 CTSNS017.2, uma interface de controle do volante projetada para manter os controles originais do volante em veículos Nissan. Abrange instalação, fiação e compatibilidade para modelos como X-Trail, Almera, Primera e Terrano.
	Connects2 CTSBM009.2 BMW Steering Wheel Control Interface Installation Manual Installation manual for the Connects2 CTSBM009.2 BMW Steering Wheel Control Interface. This guide provides fitting instructions, application lists, and technical support information for retaining steering wheel controls, warning tones, and parking sensor audio in compatible BMW vehicles.
	Guia de Instalação da Interface de Controle do Volante Ford CTSFO008.2 Installation guide for the Connects2 CTSFO008.2 Ford Steering Wheel Control Interface. This interface retains steering wheel controls, parking sensor audio, and allows time/date changes from the steering wheel for compatible Ford vehicles.