VLPE mnt Tilt TV Wall Mount Bracket Instruction Manual

1. Introdução

This manual provides comprehensive instructions for the safe and proper installation, operation, and maintenance of your VLPE mnt Tilt TV Wall Mount Bracket. This bracket is designed to securely mount your Philips 65" 4K Ultra HD 60Hz LED Smart TV (Model 65PFL7900/F7) to a wall, allowing for a tilting adjustment to optimize viewing angles. Please read this manual thoroughly before installation and retain it for future reference.

2. Informações de segurança

Improper installation or use of this product can result in serious injury or damage. Please observe the following safety precautions:

• Capacidade de peso: Ensure the combined weight of your TV and any attached accessories does not exceed the mount's specified weight capacity. This mount is designed for the Philips 65" 4K Ultra HD TV (65PFL7900/F7).
• Estrutura da parede: The wall must be capable of supporting the combined weight of the mount and the TV. Consult a qualified professional if unsure about your wall's structural integrity.
• Ferramentas: Use appropriate tools for installation. Always wear safety glasses.
• Pessoal: Installation may require two people for safe handling of the TV.
• cabos: Ensure all cables are routed safely and are not pinched or strained after installation.
• Crianças: Mantenha as crianças afastadas da área de instalação.

3. Conteúdo da embalagem

Verifique se todos os componentes estão presentes antes de iniciar a instalação. Caso alguma peça esteja faltando ou danificada, entre em contato com o suporte ao cliente.

• VLPE mnt Tilt TV Wall Mount Bracket (main assembly)
• TV mounting hardware (various screws, washers, spacers)
• Wall mounting hardware (lag bolts, concrete anchors if applicable)
• Instruções de instalação
• Spirit level (often integrated or separate)
• Bonus: 44 Large Screen Cleaning Wipes

Figure 3.1: Main components of the VLPE mnt Tilt TV Wall Mount Bracket. This image displays the wall plate and the two vertical TV brackets, along with a small integrated spirit level.

Figure 3.2: Package of 44 large screen cleaning wipes. These wipes are included for maintaining the cleanliness of your TV screen.

4. Configuração e instalação

Before installation, ensure you have the necessary tools: stud finder, drill, drill bits, level, tape measure, pencil, and a screwdriver/socket wrench. Always verify wall type and stud locations.

4.1. Attaching Brackets to TV

1. Coloque cuidadosamente a TV com a tela virada para baixo sobre uma superfície macia e limpa para evitar danos à tela.
2. Identifique os orifícios de montagem VESA na parte traseira da sua TV.
3. Select the appropriate screws, washers, and spacers from the provided hardware kit that fit your TV's mounting holes. Refer to your TV's manual for VESA specifications if needed.
4. Attach the two vertical TV brackets to the back of your TV, ensuring they are centered and securely fastened. The hooks on the brackets should face upwards. Do not overtighten.

4.2. Mounting Wall Plate to Wall

1. Determine the desired height for your TV. Mark the center of where the TV will be.
2. Use a stud finder to locate two adjacent wooden studs in the wall. Mark their centers. For concrete/brick walls, use appropriate anchors (not always included, may need to be purchased separately).
3. Hold the wall plate against the wall, aligning its center with your marked TV center and ensuring the mounting holes align with the stud centers. Use a level to ensure the plate is perfectly horizontal. Mark the drill points.
4. Drill pilot holes at the marked locations. Ensure the drill bit size matches the recommendations for the lag bolts.
5. Securely fasten the wall plate to the wall using the provided lag bolts and washers. Tighten firmly, but do not overtighten to avoid stripping.

4.3. Hanging the TV

1. Com a ajuda de alguém, levante cuidadosamente a TV utilizando os suportes que a acompanham.
2. Hook the top edges of the TV brackets onto the top rail of the wall plate.
3. Gently lower the TV until the brackets fully engage with the wall plate. Ensure both brackets are securely seated.
4. Locate the safety screws or locking mechanisms at the bottom of the TV brackets. Tighten these to secure the TV to the wall plate and prevent accidental dislodging.
5. Connect all necessary cables to your TV.

5. Operating the Tilt Function

This wall mount allows for vertical tilt adjustment to reduce glare and optimize viewângulos de inclinação.

1. To adjust the tilt, locate the tilt adjustment knobs or bolts on the side of the vertical TV brackets.
2. Loosen these knobs/bolts slightly (do not remove them).
3. Carefully tilt the TV to your desired angle.
4. Once the desired angle is achieved, firmly tighten the tilt adjustment knobs/bolts to secure the TV in position.

6. Manutenção

Regular maintenance ensures the longevity and safety of your TV mount.

• Verificações periódicas: Annually, check all screws and bolts to ensure they remain tight. Do not overtighten.
• Limpeza: Wipe the mount with a soft, dry cloth. Avoid abrasive cleaners or solvents. For your TV screen, use the provided screen cleaning wipes (Figure 3.2) or a dedicated screen cleaner.
• Dano: If any part of the mount appears damaged or worn, discontinue use and contact customer support.

7. Solução De Problemas

8. Especificações

• Tipo de montagem: Montagem na parede
• Tipo de movimento: Inclinar
• Material: Metal
• Cor: Preto
• Dispositivos compatíveis: Television (Specifically Philips 65" 4K Ultra HD 60Hz LED Smart TV, Model 65PFL7900/F7)
• ASIN: B01877S7PC
• Código UPC: 664992744894

9. Garantia e Suporte

For warranty information or technical support, please refer to the contact details provided with your purchase documentation or visit the VLPE mnt official website. Guarde o comprovante de compra para solicitações de garantia.