1. Introdução
This manual provides instructions for the installation, operation, and maintenance of the Morris Products Flat Panel LED Small Flood Light, Model 71533. This energy-efficient LED floodlight features a low-profile design and is suitable for various indoor and outdoor applications.
2. Informações de segurança
- AVISO: Risco de choque elétrico. Desligue a energia no fusível ou disjuntor antes da instalação ou manutenção.
- A instalação deve ser realizada por um eletricista qualificado, em conformidade com todas as normas elétricas nacionais e locais.
- Garantir o fornecimento voltage is compatible with the fixture's requirements (120/208/240/277V).
- Não manuseie fios energizados.
- Utilize equipamento de proteção individual (EPI) adequado durante a instalação.
- This fixture is designed for wet locations (IP65, NEMA 4X).
3. Conteúdo da embalagem
Ao abrir a embalagem, verifique se todos os componentes estão presentes e sem danos. Caso alguma peça esteja faltando ou danificada, entre em contato com o suporte ao cliente.
- Flat Panel LED Small Flood Light (Model 71533)
- Suporte de montagem
Figure 3.1: Product packaging showing the Morris Products Flat Panel LED Small Flood Light box.
4. Configuração e instalação
This flood light is designed for surface mount installation using the included bracket. Ensure the mounting surface is structurally sound to support the fixture's weight.
4.1 Montagem do acessório
- Identifique um local de montagem adequado.
- Position the bracket mount against the surface and mark the drilling points.
- Drill pilot holes as necessary.
- Secure the bracket mount to the surface using appropriate hardware (not included).
- Attach the flood light fixture to the bracket, ensuring it is securely fastened. The bracket allows for adjustment of the light's angle.
Figura 4.1: Frente view of the flood light showing the LED panel and bracket mount.
4.2 Fiação elétrica
IMPORTANTE: All electrical wiring should be performed by a licensed electrician. Ensure power is disconnected at the circuit breaker before proceeding.
- The fixture supports Quad Voltage (120/208/240/277V). Connect the appropriate wires from the power supply to the fixture's wires.
- Typically, the black wire is Line (L), the white wire is Neutral (N), and the green wire is Ground (G). Refer to local electrical codes for specific color conventions.
- Use UL-listed wire connectors to secure all connections.
- Certifique-se de que todas as conexões estejam firmes e devidamente isoladas.
Figura 4.2: Voltar view of the flood light, illustrating the wiring entry point and product label.
5. Instruções de operação
Once properly installed and wired, the Morris Products Flat Panel LED Small Flood Light operates by receiving power from the connected electrical circuit.
- Ligar/desligar: The light is controlled by the external switch or remote control connected to its circuit.
- Saída de luz: The fixture provides 6,179 lumens of 5000K Cool White light.
- Photo Control (Optional): A photo control unit can be installed remotely to enable automatic dusk-to-dawn operation. This feature is not integrated into the fixture itself.
6. Manutenção
The Morris Products Flat Panel LED Small Flood Light is designed for minimal maintenance due to its durable construction and long-life LED components.
- Limpeza: Periodically clean the polycarbonate lens with a soft, damp cloth to ensure optimal light output. Avoid abrasive cleaners.
- Inspeção: Annually inspect the fixture and wiring for any signs of damage or wear. Ensure all mounting hardware remains secure.
- Resistência à corrosão: The bronze die-cast aluminum housing is corrosion-resistant, suitable for outdoor environments.
- Vida útil do LED: The LED light source has an expected life of 50,000+ hours, reducing the need for frequent bulb replacement.
7. Solução De Problemas
| Problema | Possível causa | Solução |
|---|---|---|
| A luz não acende. | No power supply; faulty wiring; tripped circuit breaker; defective fixture. | Check power supply at the source. Verify all wiring connections. Reset circuit breaker. If problem persists, consult a qualified electrician or contact customer support. |
| A luz pisca ou escurece. | Unstable power supply; loose wiring connection; incompatible dimmer (if applicable). | Ensure stable power. Check and tighten all wiring connections. This fixture is not designed for dimming unless specified by an external controller. |
| Redução da emissão de luz. | Dirty lens; extreme operating temperature. | Clean the lens. Ensure the fixture is operating within its specified temperature range (-40°F to 131°F). |
8. Especificações
| Número do modelo | 71533 |
| Marca | Produtos Morris |
| O quetage | 50 Watts |
| Fluxo Luminoso | 6,179 Lúmens |
| Temperatura de cor | 5000K (branco frio) |
| Volumetage | 120/208/240/277V (Quad Voltage) |
| Material da caixa | Alumínio fundido |
| Material da lente | Policarbonato |
| Cor de acabamento | Bronze |
| Expectativa de vida do LED | Mais de 50,000 horas |
| Temperatura de operação | -40°F a 131°F (-40°C a 55°C) |
| Classificação IP | IP65 (NEMA 4X) Dust & Water Tight |
| Certificações | cULus Listed for Wet Locations, DLC Listed |
| Dimensões | Aproximadamente 2 x 6 x 6 polegadas |
| Peso do item | 2 libras |
9. Garantia e Suporte
The Morris Products Flat Panel LED Small Flood Light (Model 71533) comes with a Garantia de 5 anos a partir da data da compra, cobrindo defeitos de materiais e de fabricação sob uso normal.
For warranty claims, technical support, or any inquiries, please contact Morris Products customer service. Keep your purchase receipt as proof of purchase.
Informações de contato:
Please refer to the Morris Products official webPara obter os dados de contato mais recentes, consulte o site ou a documentação da sua compra.