Manual do Usuário da Impressora Industrial Leve Intermec Série PD43

Introdução

This manual provides essential instructions for the setup, operation, and maintenance of your Intermec PD43 Series Light Industrial Printer. The PD43 is a robust and versatile thermal transfer printer designed for demanding applications in manufacturing, transportation, and warehousing environments. Featuring an all-metal chassis, proven printing mechanics, and powerful electronics, it delivers reliable performance. The integrated monochrome graphical display allows for intuitive setup, configuration, and fine-tuning of printing parameters directly from the device, enhancing user efficiency.

The PD43 supports various Intermec printer languages and can emulate other printer protocols, ensuring compatibility within diverse system environments. Its design allows for continuous printing of crisp, variable-data labels at speeds up to 150 mm/s (6 ips), utilizing industry-standard 200-mm (8-inch) label rolls and 450 m (18,000-inch) ribbons to minimize media loading downtime.

1. Configuração e instalação

1.1 Desembalando a impressora

• Retire cuidadosamente a impressora da embalagem.
• Verifique se todos os componentes listados na nota de entrega estão presentes.
• Conserve a embalagem original para transporte ou armazenamento futuros.

1.2 Conexão de energia

1. Certifique-se de que o interruptor de alimentação da impressora esteja na posição DESLIGADO.
2. Conecte o cabo de alimentação à entrada de energia da impressora.
3. Conecte a outra extremidade do cabo de alimentação a uma tomada elétrica aterrada.
4. Turn the printer's power switch to the ON position. The printer will initiate its startup sequence.

1.3 Connecting Data Cables

The PD43 printer offers multiple connectivity options:

• Ethernet: Connect an Ethernet cable from your network to the printer's Ethernet port.
• USB: Conecte um cabo USB do seu computador à porta USB da impressora.
• Serial: Connect a serial cable to the printer's serial port for direct communication.
• Parallel (IEEE 1284): Connect a parallel cable to the printer's parallel port if required by your system.

1.4 Loading Media (Labels and Ribbon)

Figure 1: Intermec PD43 Printer with media loaded (right) and closed (left).

Proper media loading is crucial for optimal print quality and printer operation. Refer to the printer's internal diagrams and the graphical display for specific instructions.

1. Abra a tampa superior da impressora.
2. Install the label roll onto the media supply spindle, ensuring the labels feed correctly according to the internal guides.
3. Install the thermal transfer ribbon onto the ribbon supply spindle, threading it through the print mechanism as indicated by the printer's guides.
4. Feche bem a tampa superior.
5. The printer's display will guide you through calibration if necessary.

2. Operando a impressora

2.1 Painel de controle sobreview

The PD43 features a monochrome graphical display and a push-button control panel for easy navigation and configuration.

• Tela de exibição: Shows printer status, menu options, and error messages.
• Botões de navegação: Used to scroll through menus and adjust settings.
• Botão Selecionar/Entrar: Confirma seleções.
• Botão de alimentação: Advances one label or a specified length of media.
• Botão Pausar/Cancelar: Pauses printing or cancels a print job.

2.2 Impressão básica

1. Ensure the printer is powered on and connected to your host system.
2. Load the appropriate labels and ribbon.
3. From your computer or host system, send the print job to the Intermec PD43 printer.
4. Monitor the printer's display for status updates or error messages.

2.3 Printer Configuration

The graphical display allows for direct configuration of various printer settings, including:

• Media type and sensor calibration.
• Print darkness and speed.
• Network settings (IP address, subnet mask).
• Printer language emulation.
• Diagnostic tests.

Navigate through the menu using the control panel buttons to access and modify these settings.

3. Manutenção

Regular maintenance ensures optimal performance and extends the lifespan of your PD43 printer.

3.1 Limpeza da cabeça de impressão

• Desligue a impressora e desconecte o cabo de alimentação.
• Abra o conjunto do cabeçote de impressão.
• Using a lint-free cloth or a printhead cleaning pen moistened with isopropyl alcohol, gently wipe the printhead surface from center to edge.
• Allow the printhead to dry completely before closing the assembly and reconnecting power.
• Perform this cleaning regularly, especially when print quality degrades.

3.2 Limpeza do rolo de impressão

• With the printer off and power disconnected, locate the platen roller beneath the printhead.
• Use a lint-free cloth moistened with isopropyl alcohol to clean the roller, rotating it manually to clean the entire surface.
• Deixe secar antes de usar.

3.3 Substituição de mídia

Replace label rolls and thermal transfer ribbons as they run out. Always use media that meets Intermec specifications for the PD43 printer to ensure compatibility and print quality.

3.4 atualizações de firmware

Verifique periodicamente o suporte da Intermec. website for available firmware updates. Firmware updates can improve printer performance, add new features, or resolve known issues. Follow the instructions provided with the firmware update package carefully.

4. Solução De Problemas

This section addresses common issues you might encounter with your PD43 printer.

If you continue to experience issues, consult the comprehensive technical manual available on the Intermec support website ou entre em contato com o suporte ao cliente.

5. Especificações

Key technical specifications for the Intermec PD43 Series Light Industrial Printer (Model PD43A03100010201).

• Modelo: PD43A03100010201
• Tecnologia de impressão: Transferência térmica
• Resolução de impressão: 203 dpi
• Velocidade máxima de impressão: 150 mm/s (6 ips)
• Conectividade: Ethernet, USB, Serial, Parallel IEEE 1284
• Mostrar: Monochrome Graphical Display
• Tipo de controle: Botão de pressão
• Tamanho máximo da mídia: 8 polegadas
• Peso do item: 18.5 libras
• Dimensões (pacote): 23.5 x 14.5 x 12.5 polegadas
• Características: All-metal chassis, robust design, support for various printer languages.

6. Garantia e Suporte

For detailed warranty information, please refer to the warranty card included with your product or visit the official Intermec (now Honeywell) website. Technical support and additional resources, including drivers and updated documentation, are available through the manufacturer's support channels.

Suporte online: www.honeywellaidc.com/support

When contacting support, please have your printer's model number (PD43A03100010201) and serial number ready.