1. Introdução
This manual provides detailed instructions for the installation, operation, and maintenance of your HQST 20A PWM Solar Charge Controller. This device is designed to manage the power flow from your solar panel to your battery, ensuring efficient charging and protecting your battery from overcharge and over-discharge. It is compatible with 12V and 24V PV systems and various lead-acid battery types.
2. Recursos do Produto
- Controlador de carga solar de 20A: Automatically detects 12V or 24V PV systems.
- Compatibilidade da bateria: Works with Sealed, and Flooded lead-acid batteries.
- Carregamento otimizado: Features an optimized 3-stage battery charging system to regulate electricity flow and prolong battery lifespan.
- Accurate LCD Display: Large digital LCD display clearly indicates working conditions and accurate operating data for real-time PV system monitoring.
- Proteção abrangente: Provides reverse polarity protection, block reverse current at night, short circuit, overcharge, over-discharge, and overload protection for solar panel and battery.
- Fácil instalação: Designed with corresponding icons on each connector for quick setup.
- Porta USB-A: Includes a USB-A port for charging mobile devices or powering small loads.
- Aplicações múltiplas: Suitable for RVs, cabins, workshops, garages, and other off-grid lighting or power needs.
3. Produto acabadoview
Familiarize yourself with the components of your HQST Solar Charge Controller.
Figura 3.1: Frente view of the HQST Solar Charge Controller with key components labeled, including mounting holes, LCD screen, control keys, solar panel terminals, battery terminals, load terminals, and USB port.
Figura 3.2: Detalhado view of the LCD display, showing indicators for PV (solar panel), BAT (battery), LOAD, parameter digits, and units (kWh, %, V, °C). It also illustrates the power flow from solar panel to battery to load.
4. Especificações
| Recurso | Especificação |
|---|---|
| Modelo | 20A PWM |
| Vol do Sistematage | Auto de 12V / 24V |
| Corrente de carga máxima | 20A |
| Compatibilidade do tipo de bateria | Sealed, Flooded Lead-Acid Batteries |
| Tipo de exibição | LCD |
| Saída USB | 5V/1A (USB-A Port) |
| Dimensões do produto | 5.12 x 1.38 x 2.95 polegadas (13 x 3.5 x 7.5 cm) |
| Peso do item | 4.9 onças (0.14 kg) |
| Fabricante | QGST |
| UPC | 791810331544, 810081407366 |
Figura 4.1: Physical dimensions of the HQST Solar Charge Controller, showing length (6.45 in), width (4.07 in), and height (1.85 in).
Figura 4.2: Illustration of battery types compatible with the HQST Solar Charge Controller, including Sealed, Gel, Flooded, and Lead-Acid batteries.
5. Instruções de segurança
- Ensure all connections are tight and secure to prevent loose connections that can cause excessive heat.
- Conecte sempre primeiro a bateria ao controlador de carga, depois o painel solar e, por último, a carga. Desconecte na ordem inversa.
- Do not connect an inverter directly to the load terminals of the charge controller. Connect inverters directly to the battery.
- Instale o controlador em uma área bem ventilada, longe da luz solar direta, de altas temperaturas e da umidade.
- Garantir que o sistema voltage (12V or 24V) matches the battery bank voltage. The controller automatically detects this.
- Use appropriate wire gauges for all connections to prevent voltage queda e superaquecimento.
- Use proteção ocular ao trabalhar com baterias.
6. Instalação (Configuração)
Follow these steps for proper installation of your solar charge controller.
- Montagem: Choose a dry, well-ventilated location for mounting the controller. Ensure there is sufficient space around the controller for heat dissipation. Use the mounting holes provided on the unit.
- Conecte a bateria: Connect the battery to the battery terminals on the charge controller. Ensure correct polarity (+ to + and - to -). The LCD display should illuminate, indicating the controller has detected the battery voltage.
- Conecte o painel solar: Connect the solar panel to the solar panel terminals on the charge controller. Ensure correct polarity. The controller will begin charging the battery if sunlight is available.
- Conecte a carga: Connect your DC loads (e.g., lights, fans) to the load terminals. Ensure correct polarity. The USB-A port can also be used for charging compatible devices.
Important Connection Order: Always connect the battery first, then the solar panel, and finally the load. Disconnect in the reverse order: load first, then solar panel, then battery.
Figura 6.1: A typical wiring diagram showing the connection of a 12V solar panel, the HQST PWM charge controller, a 12V deep cycle battery, and a 12V power inverter. Note the recommended fuse placement and wire gauges.
Figura 6.2: Visual step-by-step guide for connecting the HQST Solar Charge Controller: 1. Connect the battery. 2. Connect the solar panel. 3. Connect the load (light bulb). This sequence ensures safe and proper system setup.
7. Operação
Once installed, the controller operates automatically. The LCD display provides real-time information about your system.
Visor LCD de 7.1 polegadas e funções dos botões
The LCD cycles through various parameters such as battery voltage, charging current, load current, and temperature. The single red button is used to manually cycle through display modes or to enter settings for load control (e.g., timer settings for lights).
- Pressão curta: Cycles through display parameters.
- Long Press (approx. 5 seconds): Enters or exits setting mode for load control.
7.2 Controle de Carga
The controller offers programmable load control. You can set the load to turn on/off based on daylight or a timer. Refer to the specific settings menu on the LCD for detailed configuration. The USB-A port is typically powered when the load output is active.
Figura 7.1: The HQST Solar Charge Controller featuring a USB-A port, which can be used to charge mobile devices or power small USB-compatible electronics.
8. Manutenção
A manutenção regular garante o desempenho ideal e a longevidade do seu controlador de carga solar.
- Inspecionar conexões: Periodically check all wiring connections for tightness and corrosion. Loose connections can lead to power loss and overheating.
- Limpe o controlador: Keep the controller clean and free from dust and debris. Use a dry cloth for cleaning. Do not use liquids.
- Desempenho do monitor: Regularly check the LCD display for normal operation and expected readings. Note any unusual behavior.
- Saúde da bateria: Ensure your batteries are properly maintained according to their manufacturer's guidelines.
9. Solução De Problemas
Esta seção aborda problemas comuns que você pode encontrar com seu controlador de carga solar.
| Problema | Possível causa | Solução |
|---|---|---|
| O controlador não liga / LCD em branco | Bateria desconectada ou com polaridade invertida; voltagem da bateriatage muito baixo. | Verifique as conexões e a polaridade da bateria. Certifique-se de que a tensão da bateria esteja correta.tage está acima do volume mínimo de operaçãotage (normalmente 8V). |
| Bateria não carrega | Solar panel not connected or reverse polarity; insufficient sunlight; damaged solar panel or wiring. | Check solar panel connections and polarity. Ensure adequate sunlight. Inspect solar panel and wiring for damage. |
| Carregar não está funcionando | Load not connected or reverse polarity; load current exceeds controller rating; battery voltage too low; load control setting. | Check load connections and polarity. Ensure load current is within 20A. Check battery voltage. Adjust load control settings if a timer or light sensor mode is active. |
| Error codes on LCD | Specific system fault (e.g., overcharge, over-discharge, short circuit). | Refer to the controller's internal error code list (if available in a more detailed manual) or contact HQST support. Address the underlying issue (e.g., reduce load, check battery). |
10. Garantia e Suporte
For warranty information or technical support, please refer to the official HQST webou entre em contato diretamente com o serviço de atendimento ao cliente. Guarde o comprovante de compra para eventuais solicitações de garantia.
HQST is committed to providing high-quality solar products and responsive customer service.
