Introdução
This manual provides detailed instructions for the installation, operation, and maintenance of the Bogen AT10A 10-Watt Attenuator. The AT10A is designed to control the volume of individual speakers or groups of speakers in a constant voltage (70V or 25V) audio distribution system.
Please read this manual thoroughly before installation and operation to ensure proper use and to prevent damage to the unit or connected equipment.
Produto acimaview
Imagem: Frente view of the Bogen AT10A 10-Watt Attenuator. The unit features a silver faceplate with a black rotary volume knob. The knob is marked with numbers from 0 to 10, indicating volume levels. The Bogen logo is visible at the bottom center, and "AT-10A" is printed in the bottom right corner.
The Bogen AT10A is a wall-plate style attenuator, providing 10 steps of volume control plus an "OFF" position. It is suitable for use with 25V or 70V constant voltage speaker lines and has a power rating of 10 watts.
Configuração e instalação
Precauções de segurança
- Ensure all power to the audio system is disconnected before beginning installation.
- A instalação deve ser realizada por pessoal qualificado, de acordo com as normas elétricas locais.
- Do not exceed the maximum power rating of 10 watts.
Montagem
- The AT10A is designed to fit into a standard single-gang electrical box.
- Secure the electrical box in the desired wall location.
- Ensure adequate space for wiring connections behind the attenuator.
Conexões de fiação
The AT10A features screw terminals for input and output connections. Refer to the diagram below for typical wiring.
- Conecte o vol constantetage audio source (e.g., amplifier output) to the "INPUT" terminals.
- Connect the speaker(s) to be controlled to the "OUTPUT" terminals.
- Maintain correct polarity (+ to + and - to -) for all connections.
- Certifique-se de que todas as conexões estejam seguras e livres de curto-circuito.
(Note: A detailed wiring diagram would typically be provided here by the manufacturer. For this manual, general instructions are given.)
Instruções de operação
The Bogen AT10A provides simple rotary control for adjusting the volume level of connected speakers.
- Ligar: After installation, restore power to the audio system.
- Ajustando o volume: Gire o botão no sentido horário para aumentar o volume e no sentido anti-horário para diminuí-lo.
- Níveis de volume: The knob features marked positions from 0 to 10. Position '0' represents the "OFF" or minimum volume setting, while '10' represents the maximum volume setting.
- Afinação: Adjust the knob gradually to achieve the desired listening level.
Manutenção
The Bogen AT10A is designed for reliable, long-term operation with minimal maintenance.
- Limpeza: To clean the faceplate, gently wipe with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Inspeção: Periodically check the attenuator for any visible damage or loose connections. If any issues are found, disconnect power and address them promptly.
- Nenhuma peça que possa ser reparada pelo usuário: The internal components of the AT10A are not user-serviceable. Do not attempt to open or repair the unit. Refer servicing to qualified personnel.
Solução de problemas
| Problema | Possível causa | Solução |
|---|---|---|
| Nenhum som dos alto-falantes. |
|
|
| Distorted or low-quality sound. |
|
|
If troubleshooting steps do not resolve the issue, contact Bogen technical support or a qualified audio technician.
Especificações
| Recurso | Detalhe |
|---|---|
| Modelo | AT10A |
| Classificação de potência | 10 Watts |
| Volumetage Compatibilidade | Vol Constante 25V / 70Vtage Sistemas |
| Etapas de volume | 10 steps plus "OFF" |
| Montagem | Caixa elétrica de gangue única |
| Dimensões (Pacote) | 9.49 x 8.39 x 3.94 polegadas |
| Peso do item | 1.2 libras |
| ASIN | B01IE047U6 |
| UPC | 080850445046 |
| Data da primeira disponibilidade | 13 de julho de 2016 |
Suporte e informações de contato
For technical assistance, product inquiries, or further information, please contact Bogen Communications, Inc.
- Fabricante: Bogen Communications, Inc.
- Website: www.bogen.com (Examp(O link, o link real pode variar)
- Atendimento ao Cliente: Refer to the official Bogen website para informações de contato atualizadas.
Nota: As especificações do produto estão sujeitas a alterações sem aviso prévio.
