Introdução
This manual provides essential information for the safe and proper installation and use of your One For All TV Bracket WM4411. This fixed wall mount is designed for televisions with screen sizes from 32 to 60 inches and is compatible with various VESA mounting patterns. Please read all instructions carefully before beginning installation.
Informações de segurança
- Always read and understand all instructions before installation. If you have any doubts, consult a qualified professional.
- Certifique-se de que a estrutura da parede suporte com segurança o peso combinado do suporte e da sua televisão.
- Do not exceed the maximum weight capacity of 1000kgs (2200 lbs) for this mount.
- Use only the provided mounting hardware or appropriate alternatives for your specific wall type.
- Keep all small parts and packaging materials out of reach of children.
- Wear appropriate safety gear, such as eye protection, during installation.
Conteúdo da embalagem
Verifique se todos os componentes estão presentes antes de iniciar a instalação:
- Wall Mount Assembly (Wall Plate and TV Brackets)
- Mounting Kit (various screws, washers, spacers, concrete anchors)
- Manual de instruções
Note: Specific quantities of fasteners may vary. Refer to the detailed parts list in your physical manual for exact counts.
Setup (Installation Guide)
The One For All Toolbox App is available for easy setup and provides additional installation tools.
An image showing the black metal frame of the One For All WM4411 fixed TV wall mount, designed to securely hold televisions against a wall. It features a rectangular wall plate with multiple mounting holes and two vertical TV brackets with various VESA-compatible holes.
- Prepare a parede:
- Locate suitable mounting points (wood studs for drywall, solid concrete/brick).
- Use a stud finder to confirm stud locations if mounting to drywall.
- Mark the desired height and center of your TV on the wall.
- Instale a placa de parede:
- Hold the wall plate against the wall at the marked location and use a spirit level to ensure it is perfectly horizontal.
- Marque os pontos de perfuração através dos furos na placa de parede.
- Drill pilot holes according to the recommended drill bit size for your wall type and chosen fasteners.
- Fixe a placa de parede à parede utilizando os parafusos e buchas apropriados. Certifique-se de que esteja firmemente fixada.
- Anexe os suportes à TV:
- Coloque cuidadosamente a sua TV com a tela virada para baixo sobre uma superfície macia e limpa.
- Identifique os orifícios de montagem VESA na parte traseira da sua TV.
- Select the correct size screws, washers, and spacers from the mounting kit that fit your TV's VESA pattern (e.g., 100x100, 200x200, 400x400).
- Attach the two vertical TV brackets to the back of your TV, ensuring they are oriented correctly and securely tightened.
- Fixar a TV à placa de parede:
- Com a ajuda de alguém, levante cuidadosamente a TV utilizando os suportes que a acompanham.
- Encaixe os suportes da TV na borda superior da placa de parede.
- Abaixe a TV cuidadosamente até que os suportes se encaixem completamente na placa de parede.
- Proteja a TV:
- Locate the safety screws or locking mechanisms at the bottom of the TV brackets.
- Tighten these screws or engage the locking mechanisms to secure the TV to the wall plate and prevent accidental dislodgement.
Operacional
Once installed, the One For All WM4411 is a fixed wall mount, meaning it holds your TV securely in a static position close to the wall. There are no moving parts for adjustment. Ensure the TV is properly seated and secured to the wall plate as per the installation instructions.
Manutenção
- Limpeza: Use um pano macio e seco para limpar o suporte. Evite produtos de limpeza abrasivos ou solventes.
- Verificações periódicas: Periodically inspect all screws and connections to ensure they remain tight and secure. Over time, vibrations or minor shifts can loosen fasteners.
- Dano: If any part of the mount appears damaged or worn, do not use it. Contact customer support for assistance.
Solução de problemas
A TV não está nivelada após a instalação:
Ensure you used a reliable spirit level during the wall plate mounting step. If the TV is slightly off, you may need to adjust the wall plate or re-drill if necessary. Do not rely solely on included spirit levels; cross-reference with a trusted tool.
O suporte parece solto na parede:
This indicates improper installation. Immediately remove the TV. Re-check your wall type and ensure you used the correct anchors and fasteners. Verify that all screws are fully tightened into solid structural elements (studs, concrete). If unsure, consult a professional installer.
Missing parts from the mounting kit:
Contact One For All customer support or the retailer where you purchased the product to request replacement parts.
Especificações
| Recurso | Detalhe |
|---|---|
| Número do modelo | WM4411 |
| Tamanhos de tela compatíveis | 32 - 60 polegadas |
| Compatibilidade VESA | 100x100, 200x100, 200x200, 300x200, 300x300, 400x200, 400x300, 400x400 |
| Capacidade máxima de peso | 1000 kg (2200 lbs) |
| Tipo de montagem | Suporte de parede fixo |
| Dimensões do produto | 17.13 x 0.98 x 18.86 polegadas |
| Peso do item | 2.33 libras |
| Material | Plastic (Note: Main structure is metal, plastic refers to specific components) |
Garantia e Suporte
Para informações sobre garantia e suporte técnico, consulte o site oficial da One For All. website or contact their customer service directly. You can also utilize the One For All Toolbox App for additional assistance and resources.
Visite o Loja One For All Para mais produtos e informações.
