BRESSER Temeo Quadro Temperature Station User Manual

Introdução

The BRESSER Temeo Quadro Temperature Station is designed to monitor temperature and humidity at up to four different locations simultaneously. This system includes a main display unit and three remote sensors, allowing you to track environmental conditions both indoors and outdoors, or in various rooms of your home. The remote sensors transmit data wirelessly to the main unit via a 433 MHz radio signal.

Informações de segurança

• Leia todas as instruções cuidadosamente antes de usar o dispositivo.
• Guarde este manual para referência futura.
• Não exponha o dispositivo a temperaturas extremas, luz solar direta ou alta umidade.
• Evite deixar cair ou submeter o dispositivo a impactos fortes.
• Não tente desmontar ou reparar o dispositivo por conta própria. Contate pessoal de serviço qualificado.
• Descarte as baterias usadas de maneira responsável, de acordo com os regulamentos locais.

Conteúdo da embalagem

• 1x BRESSER Temeo Quadro Main Display Unit
• 3x Remote Sensors
• 1x Manual do Usuário (este documento)

Note: Batteries are not included. The main unit requires 3x AAA (LR03) batteries, and each remote sensor requires 2x AAA (LR03) batteries.

Produto acimaview

Unidade de exibição principal

Imagem: Frente view of the BRESSER Temeo Quadro main unit display. A clear view of the main unit's LCD screen, showing temperature and humidity values for four channels.

Imagem: Traseira view of the BRESSER Temeo Quadro main unit, showing control buttons and battery compartment. The back of the main unit includes buttons for 'CHANNEL', 'ALARM', 'MAX/MIN', and 'SET', along with the battery compartment cover.

• Tela LCD: Shows temperature and humidity for the main unit (IN) and up to three remote sensors (1, 2, 3).
• Botão CANAL: Selects which remote sensor's data is displayed or cycles through channels.
• Botão de alarme: Activates/deactivates temperature/humidity alarms.
• Botão MAX/MIN: Displays maximum and minimum recorded values.
• Botão de configuração: Enters setup mode for time, date, and alarm settings.
• Compartimento da bateria: Located on the rear, for 3x AAA batteries.
• Suporte integrado: For desktop placement.

Sensor remoto

Imagem: BRESSER Temeo Quadro remote sensor, front and back views. A remote sensor unit, showing its display on the front and the battery compartment and mounting hole on the back.

• Tela LCD: Shows its current temperature and humidity.
• Troca de canal: Allows selection of channel 1, 2, or 3.
• Compartimento da bateria: For 2x AAA batteries.
• Furo de montagem: Para montagem na parede.

Configurar

1. Instalação da bateria

1. Para sensores remotos:
   • Open the battery compartment cover on the back of each remote sensor.
   • Insert 2x AAA (LR03) batteries into each sensor, observing the correct polarity (+/-).
   • Set the channel switch (1, 2, or 3) on each sensor to a unique channel.
   • Feche a tampa do compartimento da bateria.
2. Para a unidade de exibição principal:
   • Abra a tampa do compartimento da bateria na parte traseira da unidade principal.
   • Insert 3x AAA (LR03) batteries, observing the correct polarity (+/-).
   • Close the battery compartment cover. The main unit will power on and begin searching for sensor signals.

2. Emparelhamento de sensores

• After installing batteries in both the sensors and the main unit, the main unit will automatically attempt to connect with the remote sensors.
• Ensure the remote sensors are within range (typically up to 30 meters in open air) of the main unit during initial setup.
• The corresponding channel numbers (1, 2, 3) on the main unit's display will show readings once a connection is established. The 'IN' channel displays the main unit's internal readings.
• If a sensor does not connect, remove and reinsert its batteries, then press the 'CHANNEL' button on the main unit to initiate a new search.

3. Localização

• Place the main unit indoors in a central location, away from direct sunlight or heat sources.
• Position remote sensors in desired monitoring areas. For outdoor use, place sensors in a sheltered spot to protect them from direct rain and sun, which can affect accuracy and device longevity.

Instruções de operação

ViewTemperatura e Umidade

• The main display unit continuously shows the current temperature and humidity for the internal sensor ('IN') and the three remote sensors (1, 2, 3).
• The display also indicates comfort levels (e.g., 'COM' for comfortable, 'DRY' for dry, 'WET' for wet) based on humidity levels.

Registros MÁX/MÍNIMO

• Pressione o MÁX/MÍN button once to display the maximum temperature and humidity recorded since the last reset.
• Pressione o MÁX/MÍN button a second time to display the minimum temperature and humidity recorded.
• Para limpar os registros MÁXIMO/MÍNIMO, pressione e segure o botão. MÁX/MÍN button for approximately 3 seconds while MAX or MIN values are displayed.

Seleção de unidade de temperatura (°C/°F)

• Na unidade principal, pressione o DEFINIR button to toggle between Celsius (°C) and Fahrenheit (°F).

Setting Alarms (if applicable)

• Pressione o ALARME botão para entrar no modo de configuração do alarme.
• Use o CANAL e MÁX/MÍN buttons to adjust the desired high and low temperature/humidity alarm thresholds for each channel.
• Imprensa ALARME again to confirm settings and activate the alarm. An alarm icon will appear on the display.
• When an alarm threshold is met, the unit will emit an audible alert and the corresponding channel's reading will flash.

Manutenção

• Limpeza: Limpe o dispositivo com um pano macio, damp pano. Não use produtos de limpeza abrasivos ou solventes.
• Substituição da bateria: Replace batteries when the low battery indicator appears on the display. Always replace all batteries in a unit at the same time.
• Armazenar: Se for guardar o dispositivo por um período prolongado, remova todas as pilhas para evitar vazamentos.

Solução de problemas

Especificações

Garantia

This BRESSER product comes with a garantia de dois anos against factory defects from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by improper use, accidents, unauthorized repairs, or normal wear and tear.

Apoiar

For technical support, warranty claims, or further information, please visit the official BRESSER website or contact their customer service department. Refer to the packaging or the BRESSER webPara obter as informações de contato mais atualizadas, acesse o site.

Online resources may include FAQs, additional manuals, and contact forms.