Manual do Usuário MIDAS DM16

1. Introdução

This manual provides comprehensive instructions for the operation and maintenance of your MIDAS DM16 16 Input Analogue Live and Studio Mixer. The DM16 is designed for both live performance and studio recording environments, featuring award-winning MIDAS microphone preamplifiers and robust construction.

Please read this manual thoroughly before operating the device to ensure proper usage and to maximize its lifespan.

Figura 1.1: Frente angulada view of the MIDAS DM16 mixer.

2. Configuração

2.1 Desembalagem e Inspeção

Upon receiving your MIDAS DM16, carefully unpack the unit and inspect it for any signs of damage that may have occurred during transit. Retain the original packaging materials for future transport or storage.

Incluído na caixa:

• Mixer analógico ao vivo e estúdio de 16 entradas MIDAS DM16
• Cabo de alimentação
• Manual do usuário (este documento)

2.2 Conexão de Energia

The DM16 operates on a standard AC power supply. Connect the provided power cord to the AC inlet on the rear panel of the mixer and then to a suitable power outlet. Ensure the power switch is in the 'Off' position before connecting to power.

Figure 2.1: Rear panel of the MIDAS DM16 showing power input and warnings.

2.3 Conexões de Entrada e Saída

The DM16 features a variety of input and output options for connecting microphones, instruments, and other audio devices.

• Entradas de microfone: 12 mono input channels with XLR connectors for microphones. These channels feature MIDAS microphone preamplificadores.
• Entradas de linha: 2 electronically-balanced stereo line input channels on 1/4" TRS connectors for instruments or line-level devices.
• Produtos principais: Conecte ao seu sistema de som principal ou à interface de gravação.
• Aux Sends: For monitor mixes or effects sends.
• Saída de fone de ouvido: For monitoring audio.

Figura 2.2: parte superior view of the MIDAS DM16 showing all input/output connections and controls.

3. Instruções de operação

3.1 Controles de Canal

Each mono input channel on the DM16 features the following controls:

• GANHO: Adjusts the input sensitivity for the microphone preampmais vivo.
• EQ: A 3-band equalizer with a swept mid-band for precise tone shaping.
  

  Figura 3.1: Detalhado view of the 3-band EQ section on a mono channel.

• AUX 1/2: Controls the level sent to the auxiliary outputs. These can be switched pre/post fader.
  

  Figure 3.2: Aux masters section with pre/post fader switching.

• FRIGIDEIRA: Ajusta a posição estéreo do canal.
• MUDO: Silencia o canal.
• LED DE PICO: Indicates when the input signal is clipping.
• FADER: Controls the output level of the channel to the main mix.
  

  Figure 3.3: Channel faders for precise level control.

3.2 Poder Fantasma

The DM16 provides +48V phantom power for condenser microphones. This is a global switch, meaning it applies to all microphone inputs simultaneously. Ensure all connections are made before activating phantom power to prevent damage to non-phantom powered devices.

Figure 3.4: Phantom power switch.

3.3 Monitoramento

Use the headphone output and monitor controls to listen to the main mix or specific auxiliary sends. The monitor section includes controls for local monitor and phones output levels.

Figure 3.5: Monitor and headphone controls.

4. Manutenção

Proper maintenance ensures the longevity and optimal performance of your MIDAS DM16 mixer.

• Limpeza: Use a soft, dry cloth to clean the exterior of the mixer. Avoid abrasive cleaners or solvents that could damage the finish or controls.
• Proteção contra poeira: Keep the mixer covered when not in use to prevent dust accumulation, especially around faders and knobs.
• Ventilação: Assegure-se de que haja fluxo de ar adequado ao redor da unidade para evitar superaquecimento. Não obstrua as aberturas de ventilação.
• Armazenar: Store the mixer in a cool, dry environment away from direct sunlight and extreme temperatures.

5. Solução De Problemas

This section addresses common issues you might encounter with your DM16 mixer.

• Sem energia:
  • Check if the power cord is securely connected to both the mixer and the power outlet.
  • Verifique se a tomada elétrica está funcionando.
  • Ensure the power switch on the rear panel is in the 'On' position.
• Sem saída de som:
  • Check all input and output cable connections.
  • Ensure channel faders and the main mix fader are raised.
  • Verify that the MUTE buttons on active channels are not engaged.
  • Check the gain settings for each channel.
  • Confirm that your connected speakers or monitoring system are powered on and functioning correctly.
• Som distorcido:
  • Reduce the GAIN setting on the input channel if the PEAK LED is frequently illuminating.
  • Lower the output level of the connected source device.
  • Verifique se há cabos defeituosos.
• Zumbido ou ruído:
  • Certifique-se de que todos os cabos estejam devidamente blindados e em boas condições.
  • Verifique se há loops de terra; tente conectar todos os equipamentos de áudio à mesma régua de energia.
  • Mantenha os cabos de áudio afastados dos cabos de energia.

If you encounter issues not covered here, please refer to the support section.

6. Especificações

7. Garantia e Suporte

7.1 Informações de garantia

Your MIDAS DM16 mixer is covered by a limited warranty against defects in materials and workmanship. Please refer to the warranty card included with your product or visit the official MIDAS website para obter termos e condições detalhados da garantia.

Observação: The warranty may not cover damage caused by improper use, unauthorized modifications, or natural disasters.

7.2 Suporte ao cliente

For technical assistance, troubleshooting, or service inquiries, please contact MIDAS customer support through their official website ou as informações de contato fornecidas na documentação do produto.

Recursos on-line:

• Official MIDAS Website: www.midasconsoles.com
• Product Support Page: (Specific link if available, otherwise general weblocal)

When contacting support, please have your product model number (DM16) and serial number ready.