1. Informações de segurança
Instruções importantes de segurança:
- Protect the unit with appropriate circuit breakers or fuses according to the nameplate.
- Assegure-se de que o volume de fornecimentotage (volts) corresponde ao indicado na placa de identificação.
- Esta unidade deve ser aterrada. Use apenas condutores de cobre.
- Use cabos de alimentação adequados para 75°C (167°F).
- Desligue a fonte de alimentação da unidade no disjuntor/fusível antes da instalação, reparo e limpeza.
- Ensure that the unit is designed for the intended use (consult the product catalog or a representative if necessary).
- Capacidade de aquecimento recomendada: 1.25 W/pé cúbico (0.03 m³).
2. Produto acabadoview
The Stelpro Uniwatt UHC2002WCW is a modern, surface-mounted convector heater designed for quiet operation and efficient heating in various indoor spaces. This model provides 2000 watts of heating capacity at 240V (1500W at 208V) and requires an external wall thermostat for temperature control.
Principais características:
- Capacidade de aquecimento: 2000W (240V) / 1500W (208V), suitable for large rooms.
- Controlar: Requires an external wall thermostat (sold separately).
- Operação silenciosa: Engineered for minimal noise.
- Projeto: Sleek, modern look with rounded corners and a durable steel cabinet.
- Instalação: Designed for surface mounting with a concealed bracket.
- Material: 22-gauge steel front and cabinet.
- Recurso especial: Cool Touch Exterior.
Componentes do produto:
This image displays the front of the Stelpro Uniwatt UHC2002WCW convector heater, highlighting its clean white finish and the top air outlet grille.
Um detalhado view of the heater's durable white finish, which is an epoxy-polyester powdercoat designed for a crisp matte look.
Esta imagem mostra a lateral profile of the convector heater, emphasizing its slim design which allows it to blend discreetly into any room.
An illustration detailing the physical dimensions of the heater, including its width, height, and depth, crucial for planning installation space.
3. Configuração e instalação
This convector heater is designed for surface mounting and hardwired electric connection. Ensure all safety precautions are followed before beginning installation.
3.1 Determining Heating Requirements:
Before installation, determine the appropriate wattage for your space. The recommended heating capacity is 1.25 W per cubic foot (0.03 m³).
This table provides a guide to determine the required power (in watts) based on the area to be heated (in square feet or square meters), helping users select the correct heater for their space.
3.2 Mounting the Heater:
The heater features a concealed mounting bracket for a clean and professional appearance. Refer to the detailed instructions provided in the packaging for specific mounting steps.
This image illustrates the concealed mounting bracket, which allows the heater to be securely attached to the wall while maintaining a sleek, integrated look.
This image highlights the ease of installation for the convector heater, emphasizing its user-friendly design for mounting.
3.3 Conexão Elétrica:
This unit requires a 240V hardwired electric connection. Ensure the power supply is off at the circuit breaker before making any electrical connections. Connect the black and red wires, and ensure the ground wire is securely attached.
A diagram showing the necessary wiring for a 240V hardwired connection, including the black, red, and ground wires, for safe and proper electrical setup.
Video: Stelpro SOR1 High-End Convector Overview
Este vídeo fornece um overview of a Stelpro high-end convector, demonstrating its features and design, which may be similar to the UHC2002WCW model.
4. Operação
The UHC2002WCW convector heater operates in conjunction with an external wall thermostat (sold separately). This thermostat will control the heater's on/off cycles to maintain the desired room temperature.
4.1 Wattage Configurações:
The heater includes an internal switch to select between 1000W and 2000W output. This allows for flexibility based on the heating needs of the room. To adjust the wattage, the front panel must be removed, and the switch located inside the unit should be toggled. Always ensure the power supply is disconnected before accessing internal components.
This image shows the internal components of the heater, specifically highlighting the switch that allows users to select between 1000W and 2000W heating modes.
4.2 Thermostat Control:
Once installed and wired, the heater will respond to the external wall thermostat. Set the desired temperature on your wall thermostat, and the heater will activate or deactivate to maintain that setting.
5. Manutenção
Regular maintenance ensures optimal performance and longevity of your convector heater. Always disconnect power at the circuit breaker before performing any maintenance.
- Limpeza: Limpe periodicamente a parte externa com um pano macio e seco.amp cloth. Do not use abrasive cleaners or solvents. Ensure no liquid enters the heater.
- Remoção de poeira: Gently vacuum or brush away any dust accumulation from the air intake and outlet grilles.
- Inspeção: Annually inspect the power connections and mounting for any signs of wear or damage. If any issues are found, consult a qualified electrician.
6. Solução De Problemas
If you experience issues with your heater, refer to the following common troubleshooting steps. For problems not listed here, contact customer support or a qualified electrician.
| Problema | Possível causa | Solução |
|---|---|---|
| Aquecedor não liga. | No power supply; Thermostat set too low; Internal wattage switch off. | Check circuit breaker/fuse. Ensure thermostat is set above room temperature. Verify internal wattage switch is in 1000W or 2000W position (power off before checking). |
| Produção de calor insuficiente. | O quetage setting too low; Room size exceeds heater capacity; Airflow obstruction. | Check internal wattage switch (set to 2000W if needed). Ensure heater capacity matches room size. Clear any obstructions from grilles. |
| Ruídos incomuns durante a operação. | Loose components; Dust accumulation in fan. | Ensure all mounting screws are tight. Clean fan and internal components (power off first). If noise persists, contact support. |
7. Especificações
| Recurso | Detalhe |
|---|---|
| Marca | Stelpro |
| Número do modelo | UHC2002WCW |
| Cor | Branco |
| Dimensões do produto | 88.9 x 10 x 44.61 cm (35 x 3.9 x 17.5 polegadas); 8.57 kg (18.9 libras) |
| Potência/Wattage | 2000 watts (a 240V) |
| Volumetage | 240 Volts |
| Material | Aço |
| Recurso especial | Exterior com toque frio |
| Método de aquecimento | Convecção |
| Tipo de montagem | Montagem na parede |
| Uso interno/externo | Interior |
| Local de trabalho | Stelpro - 1041 Rue Parent, Saint-Bruno-de-Montarville, QC J3V 0A2 |
8. Garantia e Suporte
Stelpro products are proudly made in Canada. For warranty information, technical support, or service inquiries, please refer to the official Stelpro webou entre em contato com o departamento de atendimento ao cliente. Guarde o comprovante de compra para acionar a garantia.
This image features the "Proudly Made in Canada" logo, indicating the origin of Stelpro products.
